Slow strain rate technique for studying hydrogen induced cracking in 34CrMo4 high strength steel

Alloy hardened steels offer excellent combination of mechanical properties, hardenability and corrosion resistance. 34CrMo4 is a medium carbon, low alloy steel widely used due to a good combination of high-strength, toughness and wear resistance. However, this steel experiences hydrogen embrittlement (HE), a complex phenomenon depending on the composition and microstructure. This work estimates de loss of the mechanical properties caused by hydrogen in electrochemically H-charged specimens in absence of mechanical stress but also, at low strain rate and constant load. H-charging for 2 and 6 h induce YS losses of about 40% and 71% and UTS losses of 39% and 59%, respectively. The synergistic effect of the stress and the H-charging process leads to a higher loss, 91%, and a faster brittle fracture even though hydrogen content is similar to those firstly H-charged and then tested in air.     

发泡法制备泡沫铝

介绍了发泡法制备泡沫铝的工艺过程，论述了增粘、混合、发泡和冷却４个过程对泡沫铝孔结构的影响。采用ＴｉＨ２的缓释技术，可大大延缓ＴｉＨ２的反应时间，使ＴｉＨ２均匀混入铝熔体，从而制得孔结构均匀、吸声性能优良的泡沫铝。     

Aromatic nitrations by mixed acid. Slow liquid-liquid reaction regime

Aromatic nitrations by mixed acid have been selected as a specific case of a heterogeneous liquid-liquid reaction. An extensive experimental programme has been followed using adiabatic and heat-flow calorimetry and pilot reactor experiments, supported by chemical analysis. A series of nitration experiments has been carried out to study the influences of different initial and operating conditions such as temperature, stirring speed and sulphuric acid concentration. In parallel, a mathematical model to predict the overall conversion rate has been developed. In this paper the mathematical modelling and the implementation and experimental validation for benzene, toluene and chlorobenzene mononitration in the kinetic control regime (slow liquid-liquid reaction) are presented and discussed.     

耦合腔行波管慢波结构的工作模式及其特性

耦合腔行波管慢波结构可工作于三种不同模式：正常模、简并模和反向模。应用改进的等效电路法计算了正常模腔通带和槽通带。求得的简并模耦合槽张角与实验值相符。最后讨论了反向模耦合腔行波管诱人的特点。     

The Application of Ozone for Water Treatment In The United Kingdom — Current Practive and Recent Research

Only two water works in the UK apply ozone at present as part of their treatment, onefor taste and odor control and theother forcolor removal. Forthetwo applicationus ozone was the most economical option at thetime theplants were installed andozone has been successful for the purpose for which it was designed.     

涂硫尿素

涂硫尿素（ＳＣＵ）是一种缓效氮肥，是在普通尿素外面喷涂硫、密封剂和调理剂而制成。它在国外已成功使用多年．本文叙述了涂硫尿素的性质、生产过程、肥效和经济效益，供国内读者参考。     

ON THE SLOW MANIFOLD CHARACTERISTICS OF CAPILLARY SUCTION APPARATUS DYNAMICS

The nonlinear dynamic behaviour relating the wet front size and liquid saturation under inner cylinder (or rectangular cell) in cylindrical (or rectangular) capillary suction apparatus was investigated. The slow manifold explanation was proposed and the fast- and slow-varying variables were identified. Experiments were conducted to verify theoretical findings.     

TCP协议在卫星网络中的问题研究

由于TCP协议直接应用到卫星网络中将可能会导致网络性能下降,因此针对卫星网络的特点,分析了传播时延、高误码率、非对称连接方式等特点对TCP协议性能的影响,对主要解决方法进行了分析、比较现有的几种解决方法利弊,应根据具体应用采用相应的解决方案。     

浅谈TCP拥塞控制与其改进思路

如今网络已经离不开人们的生活,发展势头迅猛,网络的终端设备不仅在数量上,种类也越来越多,在此发展之下,保证大量的网络数据传输与网络性能相协调是极其重要的,经典的TCP拥塞控制机制是网络发展历史中人们想出的一种解决网络拥塞的方法,但如何适应当今网络发展的需求相信还是靠人们不断的探索来寻找合适的答案。本文致力于对经典TCP拥塞控制机制的讨论并提出相应的改进思路     

提高16MnL宽冷弯合格率的研究

通过对16MnL宽冷弯性能不合格的原因进行分析、试验，提出优化生产工艺的方案。在生产中取得了良好的效果。