A continuous-time framework for least squares parameter estimation

This paper proposes a continuous-time framework for the least-squares parameter estimation method through evolution equations. Nonlinear systems in the standard state space representation that are linear in the unknown, constant parameters are investigated. Two estimators are studied. The first one consists of a linear evolution equation while the second one consists of an impulsive linear evolution equation. The paper discusses some theoretical aspects related to the proposed estimators: uniqueness of a solution and an attractive equilibrium point which solves for the unknown parameters. A deterministic framework for the estimation under noisy measurements is proposed using a Sobolev space with negative index to model the noise. The noise can be of large magnitude. Concrete signals issued from an electronic device are used to discuss numerical aspects.     

Continuous-time norm-constrained Kalman filtering

This paper considers continuous-time state estimation when part of the state estimate or the entire state estimate is norm-constrained. In the former case continuous-time state estimation is considered by posing a constrained optimization problem. The optimization problem can be broken up into two separate optimization problems, one which solves for the optimal observer gain associated with the unconstrained state estimates, while the other solves for the optimal observer gain associated with the constrained state estimates. The optimal constrained state estimate is found by projecting the time derivative of an unconstrained estimate onto the tangent space associated with the norm constraint. The special case where the entire state estimate is norm-constrained is briefly discussed. The utility of the filtering results developed are highlighted through a spacecraft attitude estimation example. Numerical simulation results are included.     

Unscented Kalman filter with advanced adaptation of scaling parameter

The paper deals with state estimation of the nonlinear stochastic systems by means of the unscented Kalman filter with a focus on specification of the σ$\sigma$-points. Their position is influenced by two design parameters—the scaling parameter determining the spread of the σ$\sigma$-points and a covariance matrix decomposition determining rotation of the σ$\sigma$-points. In this paper, a choice of the scaling parameter is analyzed. It is shown that considering other values than the standard choice may lead to increased quality of the estimate, especially if the scaling parameter is adapted. Several different criteria for the adaptation are proposed and techniques to reduce computational costs of the adaptation are developed. The proposed algorithm of the unscented Kalman filter with advanced adaptation of the scaling parameter is illustrated in a numerical example.     

Motion-based method for estimating time required to attach self-adhesive insulators

A self-adhesive insulator is a component of a home appliance that is used to suppress vibration or prevent humidity affecting the internal parts of the appliance. There is a wide range of types and designs available, allowing them to be applied to areas having different shapes. At the design stage, once an insulator design has been developed sufficiently to identify its dimensions and features, the attaching time and baseline cost must be estimated with reasonable accuracy to enable a comparison of vendor quotes. However, the current estimation method is not sufficiently accurate in terms of the baseline cost. This paper presents a motion-based time-estimating scheme with which the time required for the attachment of such insulators can be calculated more accurately. The scheme has been developed by analyzing the motions needed to attach 350 insulators and then designating representative motions and their time values. For this purpose, a modular arrangement of predetermined time standards (MODAPTS) is adopted. Motion-based time-estimation method is useful in terms of simplicity and accuracy. It enables design engineers to estimate the time required for the attachment based only on a drawing of the insulator and a few MODAPTS rules. Estimates made with this method should vary from the actual value by no more than 9.5%.     

用于虚拟现实的360度视频编码技术新进展*

随着虚拟现实技术不断发展,360度视频编码开始成为研究热点。应用于虚拟现实的360度视频与传统的视频相比分辨率更高,编码数据量更大,在实际应用中面临传输带宽有限的瓶颈,编码效率问题有待解决。归纳分析了国际标准组织联合视频研究组（joint video exploration team, JVET）正在制定的360度视频编码投影变换技术及其编码优化方法,综合对比了各变换技术的编码性能。根据当前最新研究成果,对下一步研究需要解决的问题进行了探讨总结,给出未来的研究方向和思路。     

间歇反应器中料液脱溶时间的估算

介绍以对间歇反应器的一些基本合理的假设为基础,利用溶剂和传热介质的热力学和物性参数,推导出分别用水蒸汽和传热流体(THF)作为反应器夹套加热介质时,估算将反应器内料液进行脱溶浓缩所需时间的数学表达式,并用示例加以说明。     

Design of a slave arm of a surgical robot system to estimate the contact force at the tip of the employed instruments

Acquisition of the contact force at the instrument tip can enable better performance, e.g. transparency of the haptic feedback in the surgical robot systems. It is, however, difficult to measure the contact force directly due to technical limitations in attaching sensors to the tip of the instruments. This paper proposes a method to estimate the forces by installing the sensors away from the instrument tip. The proposed method employs specially designed mechanical parts of the slave robot, i.e. a slider cover plate for the z-axis translational force along the insertion direction, and docking clamps for the rotational pivot torques around the fulcrum point. Strain gauges are attached to specially designed places with enhancing shapes. The simulation results of the force estimation are presented to confirm the strain concentration area. The proposed method is validated with quantitative experimental results. Calibrated weights are determined upon the comparison of the strain value with a calibrated 6-axis force/torque sensor. The percentage error in the force calibration is about 5~8% calculated by the root mean square error (RMSE) of force-sensing performance. In addition, it can be computed by considering only the bending phase of each sensor although the hysteresis is observed from the calibration graph.     

Noncertainty equivalent adaptive control of robot manipulators without velocity measurements

This paper presents a noncertainty equivalent adaptive motion control scheme for robot manipulators in the absence of link velocity measurements. A new output feedback adaptation algorithm, based on the attractive manifold design approach, is developed. A proportional-integral adaptation is selected for the adaptive parameter estimator to strengthen the passivity of the system. In order to relieve velocity measurements, an observer is designed to estimate the velocities. The controller guarantees semiglobal asymptotic motion tracking and velocity estimation, as well as L_∞ and L₂ bounded parameter estimation error. The effectiveness of the proposed controller is verified by simulations for a two-link robot manipulator and a four-bar linkage. The results are further compared with the earlier certainty-equivalent adaptive partial and full state feedback controller to highlight potential closed-loop performance improvements.