Eicosapentaenoic acid (20∶5n-3) from the marine microalgaPhaeodactylum tricornutum

Eicosapentaenoic acid (EPA, 20∶5n-3) was obtained from the marine microalgaePhaeodactylum tricornutum by a three-step process: fatty acid extraction by direct saponification of biomass, polyunsaturated fatty acid (PUFA) concentration by formation of urea inclusion compounds, and EPA isolation by semipreparative high-performance liquid chromatography (HPLC). Alternatively, EPA was obtained by a similar two-step process without the PUFA concentration step by the urea method. Direct saponification of biomass was carried out with two solvents that contained KOH for lipid saponification. An increase in yield was obtained because the problems associated with emulsion formation were avoided by separating the biomass from the soap solution before adding hexane for extraction of insaponifiables. The most efficient solvent, ethanol (96%) at 60°C for 1 h, extracted 98.3% of EPA. PUFA were concentrated by the urea method with a urea/fatty acid ratio of 4∶1 at a crystallization temperature of 28°C and by using methanol and ethanol as urea solvents. An EPA concentration ratio of 1.73 (55.2∶31.9) and a recover yield of 78.6% were obtained with methanol as the urea solvent. This PUFA concentrate was used to obtain 93.4% pure EPA by semipreparative HPLC with a reverse-phase, C₁₈, 10 mm i.d.×25-cm column and methanol/water (1% acetic acid), 80∶20 w/w, as the mobile phase. Eighty-five percent of EPA loaded was recovered, and 65.7% of EPA present inP. tricornutum biomass was recovered in highly pure form by this three-step downstream process. Alternatively, 93.6% pure EPA was isolated from the fatty acid extract (without the PUFA concentration step) with 100% EPA recovery yield. This two-step process increases the overall EPA yield to 98.3%, but it is only possible to obtain 20% as much EPA as that obtained by three-step downstream processing.     

Study of siloxane additives migration to the surface of polyester-(melamine)-polyurethane coatings: Aging effects after ethanol cleaning

This study determines the influences of siloxane flow agents’ migration on the outermost surface composition of clearcoats, before and after ethanol cleaning. This evaluation is undertaken to improve adhesion of pressure-sensitive adhesives (PSAs) on automotive paint systems. Most of the siloxane flow agents segregate from the bulk to the clearcoat outermost surface during curing. These additives can cover until 50% of the surface area but X-ray photoelectron spectroscopy (XPS) and time of flight-secondary ion mass spectrometry (ToF-SIMS) analyses indicate that they can be removed by ethanol cleaning. Composition of the cleaned clearcoats surfaces are similar as the composition of clearcoat formulated without siloxane additives: the polyester-(melamine)-polyurethane network is more detected than before cleaning. However, outermost surface analyses show that several aging weeks increase the siloxane additives segregation. This post-cleaning migration modifies the clearcoat surface composition and cancels the chemical modifications due to the ethanol cleaning. XPS analyses show that silicon concentrations after cleaning and aging are inversely proportional to the initial silicon concentrations measured after curing. It highlights that aging has to be controlled to improve adhesion of PSAs on clearcoats. A second ethanol cleaning on aged clearcoats is not effective to remove these new siloxane additives. Their formulation should be different from the flow agents and it could modify their solubility in ethanol. This result could also indicate that these new siloxane additives are not located on the last molecular layer of surface and they would not be soluble in ethanol.     

Contributions to characterization of poly(vinyl chloride)–lignin blends

The present study evaluates the impact of blending organosolv and kraft lignins, which are natural polymer by‐products in the pulp and paper industry, with plasticized poly(vinyl chloride) (PVC) in flooring formulations. Also examined is the impact of replacing dioctyl phthalate, a PVC industry general‐purpose plasticizer, with diethylene glycol dibenzoate (Benzoflex 2‐45), tricresyl phosphate (Lindol), or alkyl sulfonic phenyl ester (Mesamoll) in these formulations. The influence of the different types of lignins and plasticizers on the processibility, thermal, and mechanical properties of the blends is discussed. These properties demonstrate that partial replacement of PVC (20 parts) with different lignins is feasible for some formulations that can be successfully used as matrices for a high level of calcium carbonate filler in flooring products. In addition, the data demonstrate that the presence of certain plasticizers, which interfere with the intramolecular interactions existing in lignins, may allow the lignin molecules to have more molecular mobility. The morphology and the properties of PVC plasticized lignin blends are strongly influenced by the degree and mode of the lignin plasticization and its dispersion within the PVC matrix. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2732–2748, 2006     

Does morphology stick? Tailored particle morphologies by swelling polymerization process

Structured dispersion particles suitable for pressure sensitive adhesives (PSA) were synthesized via swelling polymerization technique (EP 359562). Particles consisting of poly(n‐butyl acrylate) copolymerized with different types of carboxylic acids were used as seeds. The final particles were synthesized by swelling polymerization process, using 6 wt % styrene or 6 wt % methyl methacylate. The resulting particle morphology was analyzed by atomic force microscopy (AFM) and transmission electron microscopy (TEM). From previous works (Coll Surf A 2001, 183–185, 725–737; J Appl Polym Sci 2004, 91, 2610–2623) where two‐step emulsion polymerization was used on similar particles, it is expected that the particle morphology is affected by the polarity of the monomer used for swelling polymerization because of the phase compatibility (thermodynamic parameter). In this work, the seed particles used were always of a glass transition temperature (T_g) below polymerization temperature. The diffusion of the growing polymer chains from the swelling polymerization is therefore mainly affected by their own T_g and the influence of the carboxy groups on the chain length of the entering radicals (kinetic parameter). The different morphologies of the single particles are discussed qualitatively. The effects of reaction parameters are compared with the results given in the previous work. The structure of the corresponding dispersion films was characterized using AFM. Correlations to macroscopic properties such as the cohesive strength and peel adhesion to different substrates are discussed. The results are also compared with the application properties of the corresponding unmodified particles, statistical copolymers, and to blends with small sized PMMA or PS particles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1444–1455, 2006     

Attraction of Male European Tarnished Plant Bug, <Emphasis Type="Italic">Lygus rugulipennis</Emphasis> to Components of the Female Sex Pheromone in the Field

Previous work showed that females of the European tarnished plant bug, Lygus rugulipennis Poppius (Heteroptera: Miridae), produced three chemicals, hexyl butyrate, (E)-2-hexenyl butyrate, and (E)-4-oxo-2-hexenal, and that these were suspected to be components of the female sex pheromone. In field experiments, traps baited with blends of these chemicals dispensed from polyethylene vials and sachets failed to catch significant numbers of males. Here, we report more recent field experiments in which the chemicals were released from glass microcapillary tubes. A blend of hexyl butyrate and (E)-4-oxo-2-hexenal was significantly attractive to male L. rugulipennis. In addition, whereas the mixture of all three components attracted fewer L. rugulipennis males, this tertiary blend captured significantly greater numbers of males of the congeneric species Lygus pratensis than the binary mixture. The possible reasons for the success of the microcapillaries compared with other dispensers are discussed.     

Persistence of nonprotein seed amino acid s-(β-carboxyethyl)-cysteine in young leaves ofCalliandra rubescens Ecological implications

The insecticidal nonprotein amino acid S-(-carboxyethyl)-cysteine (S-CEC) is the major free amino acid in the seeds of severalCalliandra spp. where it accounts for up to 2.9 % of dry weight. Lesser amounts of other related S-containing amino acids and an array of nonprotein imino acids derived from pipecolic acid are other constituents. High concentrations of imino acids, which also show insecticidal activity, are maintained in the mature leaves, but sulfur compounds are lacking. In this study the disappearance of S-CEC from the germinating seeds and young seedlings ofC. rubescens was monitored over time. After 10 weeks, S-CEC continues to be found in high concentrations in the stems and new leaves. As young leaves mature, sulfur compounds quickly decrease in concentration. Traces of S-CEC are found in new leaves of plants up to nine months after germination. Whether high concentration of S-CEC in young leaves is due to transportation from the seed or de novo synthesis is unclear. The ecological implications are discussed.     

海明滴定法快速测定废水中的LAS含量

介绍了一种测定废水中LAS浓度的新方法。克服了常规方法亚甲基蓝比色法要绘制标准曲线，操作过程复杂等局限性。该方法测定过程简单，结果准确，标准偏差为1．4l，变异系数为3．92％。     

聚天冬氨酸的合成与表征

以L-天冬氨酸为原料,热缩合成聚天冬氨酸酐,水解得到聚天冬氨酸。采用凝胶色谱法(GPC)测定了聚天冬氨酸的分子量,并用核磁共振(NMR)对其进行了表征。     

Atom transfer radical polymerization of n‐butyl methacrylate in an aqueous dispersed system

Atom transfer radical polymerization of n‐butyl methacrylate (BMA) was conducted in an aqueous dispersed system with different kinds of copper complexes. The partitioning behavior of the copper complexes, including CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipydine (dNbpy), CuCl₂/dNbpy, CuCl/2,2′‐bipydine (bpy), CuCl₂/bpy, CuCl/bis(N,N′‐dimethylaminoethyl)ether (bde), and CuCl₂/bde between the monomer (BMA), and water was studied in detail with ultraviolet‐visible spectroscopy. The results show that with a less hydrophobic ligand, such as bpy or bde, most of the Cu(I) or the Cu(II) complexes migrated from the BMA phase to the aqueous phase, the atom transfer equilibrium was destroyed, and the polymerization was nearly not controlled; it converted to classical emulsion polymerization. As to the very hydrophobic ligand dNbpy, although the partitioning study of the copper complexes indicated that not all the copper species were restricted to the organic phase, the linear correlation between the molecular weight and the monomer conversion and the narrow polydispersities confirmed that the polymerization was still quite well controlled. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3175–3179, 2003     

不变黄HDI-PU/P(MMA-HEMA)互穿网络胶粘剂形态与性能的研究翁祥

制备了HDI(1,6-己二异氰酸酯)型聚酯聚氨酯/聚(甲基丙烯酸甲酯-甲基丙烯酸-β羟乙酯)(HDI-PU/P(MMA-HEMA))互穿网络胶粘剂,研究了接枝剂甲基丙烯酸-β羟乙酯(HEMA)用量对其形态、性能与分子结构的影响。结果表明,接枝剂HEMA可使分散相接枝到连续相中形成复合网络,从而改善其界面的相容性,提高其胶液粘度和初粘力,并可广泛作为制鞋工业用胶。