CO2 effect on activity and stability of NOx storage reduction catalysts

A catalyst for NO_x storage/reduction was prepared to improve the activity of Ba–Pt/γ-Al₂O₃ by replacing Ba with a mixture of Ba and Mg. The catalyst was prepared by impregnating Pt and then co-impregnating Ba and Mg (Mg:Ba molar ratio = 1) on commercial γ-Al₂O₃. The tests have been carried out in the presence of CO₂ at temperatures between 200 and 400 °C in order to understand the role of both the feed and various alkaline-earth metals. The storage capacity of the two catalysts was different like the mechanism in the reduction process.     

Deposition of CoO onto MoO3/Al2O3 hydrodesulfurization catalysts by solvent assisted spreading

Solvent assisted spreading of CoO over monolayer MoO₃/Al₂O₃ catalysts has been studied. CoCO₃ · Co(OH)₂ and CoCO₃ reacted with MoO₃/Al₂O₃ in water slurries. CoO deposition over MoO₃/Al₂O₃ extrudates was followed by EPMA. In the set of eleven MoO₃/Al₂O₃ catalysts, the amount of CoO adsorbed was roughly proportional to the surface area of MoO₃ monolayer. The adsorbed Co species efficiently enhanced the HDS activity.     

改性木粉/PVC复合材料的研究进展

概述了PVC木塑复合材料的发展和背景与性能。简述了木质材料的性质和木粉改性的方法,如物理方法和化学方法。介绍了木塑复合材料的生产流程、成型方法(模压成型、挤出成型、注射成型及其成型设备,讨论了对工艺参数的一些要求。指出目前国内PVC木塑复合材料发展存在的一些问题,并指明了PVC木塑复合材料的应用前景。     

Experimental and theoretical study on H2/CO2 separation by a five-step one-column psa process

An experimental and theoretical study is performed for bulk separation of H₂/CO₂ mixture (70/30 volume %) by PSA process with zeolite 5A, a process widely used commercially in conjunction with the catalytic steam reforming of natural gas or naphtha. For the optimized adsorption conditions of PSA, the characteristics of adsorption/desorption characteristics have been studied through breakthrough and desorption experiments under various conditions. The purge-to-feed ratio is important to the H₂ product purity only at a long adsorption step time. H₂ could be concentrated from 70% in the feed to 99.99% at H₂ recovery of 67.5%. The results of all five steps in PSA are successfully predicted by the LDF model considering an energy balance and nonlinear isotherm. For the model, the effective diffusivities (D,) are obtained separately from the uptake curves of H₂ and CO₂. The Langmuir-Freundlich isotherm is used to correlate the experimental equilibrium data and is very well fitted to the results.     

Event-driven,pattern-based methodology for cost-effective development of standardized personal health devices

Experiences applying standards in personal health devices (PHDs) show an inherent trade-off between interoperability and costs (in terms of processing load and development time). Therefore, reducing hardware and software costs as well as time-to-market is crucial for standards adoption. The ISO/IEEE11073 PHD family of standards (also referred to as X73PHD) provides interoperable communication between PHDs and aggregators. Nevertheless, the responsibility of achieving inexpensive implementations of X73PHD in limited resource microcontrollers falls directly on the developer. Hence, the authors previously presented a methodology based on patterns to implement X73-compliant PHDs into devices with low-voltage low-power constraints. That version was based on multitasking, which required additional features and resources. This paper therefore presents an event-driven evolution of the patterns-based methodology for cost-effective development of standardized PHDs. The results of comparing between the two versions showed that the mean values of decrease in memory consumption and cycles of latency are 11.59% and 45.95%, respectively. In addition, several enhancements in terms of cost-effectiveness and development time can be derived from the new version of the methodology. Therefore, the new approach could help in producing cost-effective X73-compliant PHDs, which in turn could foster the adoption of standards.     

Energy profile of rollback-recovery strategies in high performance computing

Extreme-scale computing is set to provide the infrastructure for the advances and breakthroughs that will solve some of the hardest problems in science and engineering. However, resilience and energy concerns loom as two of the major challenges for machines at that scale. The number of components that will be assembled in the supercomputers plays a fundamental role in these challenges. First, a large number of parts will substantially increase the failure rate of the system compared to the failure frequency of current machines. Second, those components have to fit within the power envelope of the installation and keep the energy consumption within operational margins. Extreme-scale machines will have to incorporate fault tolerance mechanisms and honor the energy and power restrictions. Therefore, it is essential to understand how fault tolerance and energy consumption interplay. This paper presents a comparative evaluation and analysis of energy consumption of three different rollback-recovery protocols: checkpoint/restart, message logging and parallel recovery. Our experimental evaluation shows parallel recovery has the minimum execution time and energy consumption. Additionally, we present an analytical model that projects parallel recovery can reduce energy consumption more than 37% compared to checkpoint/restart at extreme scale.     

Highly Transparent Lu-α-SiAlON

Novel Lu-α-SiAlON ceramics were produced by hot pressing mixtures of Si₃N₄, Lu₂O₃, AlN, and Al₂O₃ at 1950°C for 2 h in a nitrogen atmosphere. The resultant SiAlON was fully dense and possessed a uniform, equiaxed microstructure with a grain size of ∼1 μm, which resulted in a high hardness of >19 GPa. In addition to high hardness, the sample showed very high optical transparency in the visible light region, with >70% transmission at higher wavelengths. This high transparency was attributed to the uniform, dense microstructure and lack of residual grain-boundary phase.     

Fabrication of NiO Nanoparticle-Coated Lead Zirconate Titanate Powders by the Heterogeneous Precipitation Method

NiO nanoparticle-coated lead zirconate titanate (PZT) powders are successfully fabricated by the heterogeneous precipitation method using PZT, Ni(NO₃)₂·6H₂O, and NH₄HCO₃ as the starting materials. The amorphous NiCO₃·2Ni(OH)₂·2H₂O are uniformly coated on the surface of PZT particles. XRD analysis and the selected-area diffraction (SAD) pattern indicate that the amorphous coating layer is crystallized to NiO after being calcined at 400°C for 2 h. TEM images show that the NiO particles of ∼8 nm are spherical and weakly agglomerated. The thickness of the nanocrystalline NiO coating layer on the surface of PZT particle is ∼30 nm.     

Activation of a Au/TiO2 Catalyst by Loading a Large Amount of Fe–Oxide: Oxidation of CO Enhanced by H2 and H2O

Catalytic activity of a 1 wt% Au/TiO₂ catalyst is markedly improved by loading a large amount of FeO_x, on which the oxidation of CO in excess H₂ is selectively promoted at temperature lower than 60 °C. Oxidation of CO with O₂ on the FeO_x/Au/TiO₂ catalyst is markedly enhanced by H₂, and H₂O moisture also enhances the oxidation of CO but its effect is not so large as the promotion by H₂. We deduced that activation of Au/TiO₂ catalyst by loading FeO_x is not caused by the size effect of Au particles but a new reaction path via hydroxyl carbonyl intermediate is responsible for the superior activity of the FeO_x/Au/TiO₂ catalyst.     

Propylene epoxidation over Ti/MCM-41 catalysts prepared by chemical vapor deposition

Ti-containing mesoporous catalysts were prepared by chemical vapor deposition (CVD) of TiCl₄ on silica MCM-41 in the 700–900 °C temperature range. These samples were characterized (with XRD, ICP, nitrogen adsorption, FT-IR, ESCA, and TEM) and evaluated for the epoxidation of propylene with two alkyl hydroperoxides. The increase of CVD temperature resulted in the decrease of titanium content, catalyst hydroxyl population, crystallinity, and surface area. Catalyst selectivity to the desired product – propylene oxide – was highly sensitive to the deposition temperature. The best Ti/MCM-41 catalyst was prepared at the temperature of 800 °C, which had the maximum propylene oxide yield of 94.3%.