化学束外延

本文介绍了化学束外延(CBE)的发明和发展,论述了CBE的原理和设备。文中还介绍了最近提出的一种生长机理。     

Phenol novolac/poly(4- hydroxyphenylmaleimide) blend hardeners for DGEBA-type epoxy resin

Phenol novolac/poly (4-hydroxyphenylmaleimide) (PHPMI) blends were used as an epoxy resin hardener. The curing behavior of the above system and the thermal and mechanical properties of the cured epoxy resin were studied. It was not necessary to use a curing accelerator for this system, because PHPMI caused acceleration of the curing reaction. The curing mechanism of this system was investigated by using model compounds. Test pieces from the neat resins and the glass fiber reinforced resins were evaluated in terms of thermal and mechanical properties, respectively. It was found that heat resistance and mechanical properties were improved by increasing the amount of PHPMI in the hardener.     

^17O系统的R矩阵分析

采用多道多能级R矩阵理论,全面系统地分析~(17)O系统中10.5 MeV激发能以下有关~(16)O(n,n)~(16)O·~(16)O(n,a)~(13)C和~(13)C(a,a)~(13)C的全部实验数据。有关~(16)O的中子反应截面计算值被收入中国评价数据库CENDL-2和美国的评价数据库ENDF/B-6。对在R矩阵分析中如何确定本底、道半径和边界条件等问题予以讨论。     

多丝正比室中电子的最大漂移时间

多丝正比室中电子的最大漂移时间是逃逸门电路中的一个重要参数。这个参数的选择将影响逃逸门工作方式的多丝正比室的整体性能。通过实验测量得到了多丝正比室中电子的最大漂移时间的实际值和最大漂移时间随多丝正比室工作状态的变化，测量结果在实际中得到应用。     

1，2─双（二乙基膦基）乙烷的合成

以二乙基氯化膦为原料，经乙炔化及加氢两步合成了１，２－双（二乙基膦基）乙烷，产率超过文献值。用红外光谱和核磁共振波谱分别测定了结构。     

DETERMINATION OF TOTAL NITROGEN IN BARLEY AND MALT BY COMBUSTION METHOD—COLLABORATIVE TRIAL

A combustion method, relying on the Dumas principle, for the determination of total nitrogen in barley and malt, has been collaboratively tested by the Analysis Committee of the European Brewery Convention. Repeatability, r₉₅, and reproducibility, R₉₅, values were 0.063 and 0.116% of dry matter, respectively, for samples with nitrogen contents in the range 1.23 to 1.86% N of dry matter. There was no significant difference between these values for barley and malt. The Analysis Committee approved the adoption of the combustion method for inclusion in Analytica EBC as an alternative method.     

InAs／InP_（0．7）Sb_（0．3）热电子晶体管的f_T及f_（max）

用电荷控制及热电子弹道运动模型计算ＩｎＡｓ／ＩｎＰ０．７Ｓｂ０．３热电子晶体管的截止频率ｆＴ及最高振荡频率ｆｍａｘ。结果表明，ｆＴ、ｆｍａｘ分别达到２８０ＧＨｚ及６００ＧＨｚ。并指出，通过生长ＧａＳｂ中间层，ＩｎＡｓ／ＩｎＰ０．７Ｓｂ０．３ＨＥＴ可在ＧａＡｓ衬底上实现单片集成。     

强度型光纤传感器的信号检测系统

本文阐述了一种可提高强度型光纤传感器测量精度的检测系统。该系统利用同一检测电路交替检测信号、参考通道的输出信号，并将信号、参考两通道的检测结果相除，从而消除了因发光二极管光源波动及检测电路系统不稳定所带来的误差。采用同步相关技术抑制了噪声，提高了输出信噪比。实验证明，当时间常数ＲＣ为０．０５Ｓ时，采用该检测系统可获得优于千分之一的零点稳定性和优于２×１０３的输出信噪比。