Stability analysis and H∞ control for hybrid complex dynamical networks with coupling delays

This paper formulates and studies a model of complex dynamical networks with switching topology and coupling delays. Based on the hybrid control and Lyapunov function, the stability and robust H_∞ control of such networks with impulsive and switching effects, which have not been studied before, are addressed with some criteria derived. Examples are given to illustrate the effectiveness of the theoretical results. Copyright © 2011 John Wiley & Sons, Ltd.     

Floral volatiles ofTanacetum vulgare L. attractive toLobesia botrana den. et schiff. females

The European grapevine moth (EGVM),Lobesia botrana, is a major pest of grapes in Europe. Females are attracted to a nonhost plant: tansy (Tanacetum vulgare L.), which is a common weed in Slovakian vineyards. A steam distillate extract of tansy flowers was analyzed by means of a GC-EAG technique to screen constituents detected by the olfactory receptors of EGVM females. From more than 200 GC peaks, nine peaks corresponding to monoterpenoids released an EAG response in more than 70% of the females (N=15):p-cymene,d-limonene,-thujene,-thujone,-thujone, thujyl alcohol, terpinene-4-ol, (Z)-verbenol, and piperitone. The steam distillate of tansy as well as a synthetic blend of identified compounds released consistent attraction in a field cage. The use of nonhost plants and host plant odors in integrated pest management is discussed.     

GICL型鼓形齿联轴器的研制

分析了国内外鼓形齿式联轴器技术的发展和特点，介绍了GICL型鼓形齿式联轴器的研制过程。     

露天矿山深-浅耦合台阶爆破方法研究及应用

爆破大块率高一直是困扰国内外众多露天矿山的技术难题,银山矿露天采矿场由于采区地质条件复杂,爆破大块率高的现象尤为明显。为此,针对露天采矿场岩性复杂易产生大块的区域,基于岩石的物理力学性质,计算出千枚岩和斑岩爆破区域需增设的短孔孔位。为减少爆破大块的产生率,提出了中深孔爆破方法—深-浅耦合台阶爆破方法。在银山矿露天采矿场实施深-浅耦合台阶爆破方法后,爆破大块率得到有效控制并取得了显著的社会及经济效益。     

WC-Co-Ni硬质合金热扩散率的研究

本文研究了配碳量、粘结相中镍含量和温度对WC－Co－Ni硬质合会热扩散事的影响。结果表明，合金的热扩散率随配碳量、粘结相中谋含量增加而增加，随温度升高而降低．     

Improvement of coercivity and thermal stability of Nd-Fe-B sintered magnets by intergranular addition of Tb80Fe20 alloy

To improve the coercivity and temperature stability of Nd-Fe-B sintered magnets for high-temperature applications, the eutectic Tb₈₀Fe₂₀ (wt%) alloy powders were added into the Nd-Fe-B sintered magnets by intergranular method to enhance the coercivity (H_cj) and thermal stability. The microstructure, magnetic properties and thermal stability of the Nd-Fe-B magnets with different Tb₈₀Fe₂₀ contents were studied. The experimental results demonstrate that the coercivity (H_cj) of the sintered Nd-Fe-B magnet is significantly enhanced from 14.12 to 27.78 kOe, and the remanence (B_r) decreases not obviously by introducing 4 wt% Tb₈₀Fe₂₀ alloy. Meanwhile, the reversible temperature coefficients of coercivity (β) and remanence (α) of the Nd-Fe-B magnets are increased from ?0.5634%/℃ to ?0.4506%/℃ and ?0.1276%/℃ to ?0.1199%/℃ at 20–170 ℃, respectively. The Curie temperature (T_C) of the Nd-Fe-B magnet is slightly enhanced with the increase of Tb₈₀Fe₂₀ content. Moreover, the irreversible flux magnetic loss (h_irr) is obviously reduced as Tb₈₀Fe₂₀ addition increases. Further analysis of the microstructure reveals that a modified microstructure, i.e. clear and continuous RE-rich grain boundary layer, is acquired in the sintered magnets by introducing Tb₈₀Fe₂₀ alloy. The associated mechanisms on improved coercivity and thermal stability were comprehensively researched.     

In situ technique for synthesizing multiple ceramic particulates reinforced titanium matrix composites (TiB + TiC + Y2O3)/Ti

In situ synthesized titanium matrix composites reinforced with multiple ceramic particulates including TiB, TiC and Y₂O₃ were fabricated by non-consumable arc-melting technique utilizing the chemical reaction among Ti, B₂O₃, B₄C and Y. The thermodynamic feasibility of the in situ reactions has been considered. X-ray diffraction (XRD) was used to identify the phases in the composites. Microstructures of the composites were observed by means of optical microscope (OM), scanning electron microscope (SEM) and electron probe. It is concluded that multiple reinforcements are synthesized and they show different shapes: TiB grows in needle shape; TiC grows in near-equiaxed and rod-like shapes; Y₂O₃ grows in near-equiaxed shapes when the content of Y is 0.6 wt.% and grows in dendritic shapes when the content of Y increases to 1.8 wt.%. Reinforcements TiB, TiC and Y₂O₃ are distributed uniformly in the titanium matrix.     

数据融合在电梯群控系统中的应用

将数据融合技术引入电梯群控系统中,建立了基于数据融合技术的模糊联结聚合神经网络模型,对影响电梯调度的各因素进行充分有效的数据处理后,得到的电梯控制参数作为电梯调度单元的输入.应用实例表明了该方法是方便且有效的.     

应用有限元方法对高速电主轴的优化设计

介绍了高速电主轴的结构特点，应用有限元分析软件ANSYS以刚度为目标对高速电主轴进行了优化设计，并对优化后的结构进行了热态校核。     

磁性纤维随机混合媒质等效电磁参数的计算

为计及强散射偶极子间的相互作用,引入参量εh和μh,利用广义多重散射理论及MATLAB计算机软件对在2 GHz～18 GHz频率下的体积占空比为8%的铁纤维随机混合媒质等效磁导率的实验值进行曲线的拟合,导出了耦合系数εh和μh,并在此基础上,对体积占空比分别为30%和20%的铁纤维随机混合媒质等效磁导率进行了计算,计算结果与实验吻合良好.