Hydrothermal Modeling Studies of Cooling Tower Alternatives

The Environmental Effects Committee of the ASCE Energy Engineering Division has been developing a report on “Energy Production and Reservoir Water Quality” for publication. The report covers the regulatory framework that dictates much of the procedures for studies related to this topic, the fundamental reservoir hydrodynamics and water quality modeling used in preparing studies, the kinds of studies that can be prepared at different levels of analysis, and a series of applications that illustrate the problems encountered and applications of the various techniques. This study of hydrothermal modeling as applied to examining cooling tower alternatives for an existing steam electric station on a moderately large reservoir is included in this report and is presented here as an illustration of the types of studies included. This particular study subtended the usual steam electric plant cooling water discharge studies that relate to specific regulatory thermal plume size standards, and had to be designed around developing plant and cooling tower operations that would meet specific fisheries requirements for a zone of passage and refuge for fishes throughout the receiving embayment. After being used in developing cooling tower and plant operating details for the designers to work with, it was required that the hydrothermal modeling results be verified under actual tower operating conditions. In addition, it was required that the impact of the combined operations on dissolved oxygen be examined in detail. This paper covers the background to setting up the study, the kinds of statistical comparisons used to verify the hydrothermal studies, and similar studies for the analysis of dissolved oxygen distributions.     

Burner Performance Evaluation Using Test Code

Development of new burner technology is common practice nowadays. Standardized test codes are available to conduct tests to determine operating characteristics and thermal performance of different parts of steam generating units. This paper describes the results of testing performed to evaluate thermal efficiency of a 74.5?kW fire-tube steam generator fired with a new premixed flame burner in comparison to a typical standard-retrofit diffusion flame burner system. Two premixed flame burners sized at 7.6 and 10.1?cm were tested. Testing was performed in accordance with the ASME PTC 4.1 Power Test Code. The evaluation was conducted in the range of small- to mid-sized, natural gas-fired applications, from 1.06?to?2.64×106?kJ/h. The environmental nitrogen oxide (NOx) emissions performance was also compared for both burner technologies. The results of this evaluation indicate that firing the test boiler with the 7.6?cm new burner slightly improves unit thermal efficiency by 4.0–3.3% for a unit load ranging from approximately 1.06?to?1.79×106?kJ/h, respectively. Operation with the 10.1?cm new burner improves the thermal efficiency by approximately 1.6% at 2.32×106?kJ/h. The uncertainty in the measurements used in the efficiency calculations should account for approximately ±1.5% uncertainty in the reported gross efficiency. Reductions in NOx emissions of the order of 10% resulted from operation with the new premixed flame burners.     

Applications of the discrete element method in mechanical engineering

Compared to other fields of engineering, in mechanical engineering, the Discrete Element Method (DEM) is not yet a well known method. Nevertheless, there is a variety of simulation problems where the method has obvious advantages due to its meshless nature. For problems where several free bodies can collide and break after having been largely deformed, the DEM is the method of choice. Neighborhood search and collision detection between bodies as well as the separation of large solids into smaller particles are naturally incorporated in the method. The main DEM algorithm consists of a relatively simple loop that basically contains the three substeps contact detection, force computation and integration. However, there exists a large variety of different algorithms to choose the substeps to compose the optimal method for a given problem. In this contribution, we describe the dynamics of particle systems together with appropriate numerical integration schemes and give an overview over different types of particle interactions that can be composed to adapt the method to fit to a given simulation problem. Surface triangulations are used to model complicated, non-convex bodies in contact with particle systems. The capabilities of the method are finally demonstrated by means of application examples. Commemorative Contribution.     

基于压水试验数据的渗透系数应力敏感性研究

岩体渗透率与应力关系是进行岩体渗流应力耦合分析的基础。基于龙滩水电站边坡岩体渗流压水试验结果和边坡岩体岩性及物理力学性质，对岩体渗透系数和地应力进行了分析计算，给出了边坡岩体渗透率随应力变化的关系式，为进行边坡岩体渗流一应力耦合分析提供了可靠数据。     

Use of rheology, dielectric analysis and differential scanning calorimetry for gel time determination of a thermoset

Measurements of gel time of the epoxy system DGEBA(n=0)/m-XDA were carried out using rheometry and dielectric analysis with the objective of checking the validity of Mangion-Johari equation (DEA) and Harran-Laudouard criterium (rheometry) for gel time determination. In this work, gel times obtained by rheometry and dielectric analysis are compared and conversions at gel time calculated. From the experimental results obtained for gel times it was found a reasonable agreement between the two techniques that lead to gel conversion values very close to those obtained using Flory equation.     

核电反应堆用芯部材料的核物理性能

核物理性能是核电站反就堆芯部结构材料的首要技术条件。本文概述合金材料核物理的有关问题，以及核截面的计算方法。     

热回流式冷凝器的设计

热回流式冷凝器可以形成接近于冷凝气体沸点温度的热回流，采用气液两相分路结构，讨论了此种冷凝器换热面积及液泛极限速度的计算。     

铸铁热分析用试样新型激冷剂的实验研究

从冷却曲线上相变段倾角最小原则出发，研究了新型激冷剂的配比与热分析法检测铸铁成分精度的关系，实验结果表明，能使相变段倾角最小的成分配比，也能提高对铸铁成分的热分析和检测精度。     

Preparation of polyimide-epoxy composites

The formation of a three dimensional network of crosslinked epoxy leads all unmodified epoxies to have inherent brittleness and relatively low degradation temperatures. Polyimides, on the other hand, are widely used for applications that require high degrees of flexibility and thermal resistance. Here, we have focused on the preparation of epoxy systems cured with polyamic acids instead of traditional amino-group-containing hardening agents. The cure behavior and potential reaction mechanisms of EPON 828 resin and polyamic acid mixtures were evaluated by DSC and TGA. Thermal analysis showed a complex reaction sequence taking place in the mixture and also determined the extent of reaction of the polyamic acid with itself and the competitive reaction of the polyamic acid with the epoxy. The compositions of the mixtures were varied to see the dependence of the cure behavior on component concentrations. Solutions of the two components did not phase separate and also phase separation was not apparent either optically or microscopically in the cured samples. This phase behavior was attributed to a unique in situ reaction. A novel solvent system for the polyamic acid precursor was also used.     

聚氨酯泡沫夹克管生产材料的代用

介绍一种用于生产聚氨酯泡沫夹克管保温层的新材料聚酯聚醚，报道选用这种材料生产泡沫夹克管的工艺及工要工艺参数和产品达到的技术指标及现场应用情况。