泡沫塑料表面的磁控溅射镀膜技术研究

对硬质聚氨酯泡沫塑料进行适当的前处理(涂刮不饱和聚酯腻子和喷涂双组份聚氨酯清漆),再采用磁控溅射镀膜技术对其进行紫铜T2镀膜,能够有效地降低泡沫塑料的吸水率,提高尺寸稳定性.     

Thermal error measurement and modelling in machine tools.: Part I. Influence of varying operating conditions

Thermal error in machine tools has been observed to be closely linked to the temperature of critical elements of the machine. It was found, in the experiments conducted herein, that there was a significant increase in the axis positioning error on account of an increase in the temperature of the machine elements due to continuous operation. However, it was also observed that the specific operating parameters of the test cycles carried out also significantly affected the positioning error. Different sets of operating parameters generated significantly different error values even though the temperature of the machine elements generated by those operating conditions was similar. As such, this observation forms a very important consideration in the development of a generic thermal error compensation system. It appears to indicate that such a system needs to be capable of evaluating the compensation depending upon the temperature values of the machine elements as well as account for the effect that different operating parameters induce upon the positioning error under the same thermal condition of the machine. This paper attempts to analyse the thermal behaviour of a three-axis vertical machining centre under the influence of various operating parameters and, through the experimental results obtained, point out and explain the effect of these parameters on the axis positioning error. This behaviour forms the basis of an improved modelling methodology that is presented separately in Part II of this paper.     

基于PCA-Logistic模型的围岩稳定性分类研究

为了建立易于理解和应用的围岩稳定性分类模型,采用主成分分析法对围岩样本数据进行降维处理,以Logistic模型来描述围岩稳定性影响因素与围岩稳定性之间的经验关系。选取影响围岩分类的5个主要因素,根据分类标准,采用在每级标准中随机内插的方法,得到100个标准样本,用于建立PCA-Logistic模型。分析结果显示,PCA-Logistic模型拟合效果良好,对工程实例的预测结果同投影寻踪模型和分形-插值模型完全一致,表明该模型在围岩稳定性评价中具有可行性和有效性。     

On input‐to‐state stability‐based design for leader/follower formation control with measurement delays

This paper addresses the design of low‐level controllers for leader–follower formations of nonholonomic vehicles in the presence of bounded measurement delays. The concept of input‐to‐state stability is extended to encompass the effect of bounded delays and restrictions on the input. A method is proposed to integrate a Smith predictor in a backstepping design on the basis of nested saturations and nonlinear small‐gain assignment, which allows for time delays in the feedback loop. Robustness analysis under uncertain bounded time delays is provided, and design tradeoffs resulting from the use of bounded controls are discussed. Illustrative simulations are shown to validate the design and robustness analysis in the context of a simple leader–follower trailing control problem. Copyright © 2012 John Wiley & Sons, Ltd.     

Stabilization of One‐Dimensional Schrödinger Equation with Variable Coefficient under Delayed Boundary Output Feedback

This article considers stabilization of a one‐dimensional Schrödinger equation with variable coefficient and boundary observation which suffers from an arbitrary given time delay. We design an observer and predictor to stabilize the system. The state is estimated in the time span where the observation is available, and also predicted in the time interval where the observation is not available. It is shown that the estimated state feedback stabilizes the system exponentially. A numerical simulation is presented to illustrate the effect of the stabilizing controller.     

Radiometric normalization and image mosaic generation of ASTER thermal infrared data: An application to extensive sand sheets and dune fields

Data from the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) have a significant advantage over previous datasets because of the combination of high spatial resolution (15-90 m) and enhanced multispectral capabilities, particularly in the thermal infrared (TIR) atmospheric window (8-12 μm) of the Earth where common silicate minerals are more easily identified. However, the 60 km swath width of ASTER can limit the effectiveness of accurately tracing large-scale features, such as eolian sediment transport pathways, over long distances. The primary goal of this paper is to describe a method for generating a seamless and radiometrically accurate ASTER TIR mosaic of atmospherically corrected radiance and from that, extract surface emissivity for arid lands, specifically, sand seas. The Gran Desierto in northern Sonora, Mexico was used as a test location for the radiometric normalization technique because of past remote sensing studies of the region, its compositional diversity, and its size. A linear approach was taken to transform adjacent image swaths into a direct linear relationship between image acquisition dates. Pseudo-invariant features (PIFs) were selected using a threshold of correlation between radiance values, and change-pixels were excluded from the linear regression used to determine correction factors. The degree of spectral correlation between overlapping pixels is directly related to the amount of surface change over time; therefore, the gain and offsets between scenes were based only on regions of high spectral correlation. The result was a series of radiometrically normalized radiance-at-surface images that were combined with a minimum of image edge seams present. These edges were subsequently blended to create the final mosaic. The advantages of this approach for TIR radiance (as opposed to emissivity) data include the ability to: (1) analyze data acquired on different dates (with potentially very different surface temperatures) as one seamless compositional dataset; (2) perform decorrelation stretches (DCS) on the entire dataset in order to identify and discriminate compositional units; and (3) separate brightness temperature from surface emissivity for quantitative compositional analysis of the surface, reducing seam-line error in the emissivity mosaic. The approach presented here is valid for any ASTER-related study of large geographic regions where numerous images spanning different temporal and atmospheric conditions are encountered.     

Monitoring land surface processes with thermal infrared data: Calibration of SVAT parameters based on the optimisation of diurnal surface temperature cycling features

Land Surface Models (LSM) have been designed to describe water and energy transfers at the soil-vegetation-atmosphere interface, and are therefore essential in many environmental disciplines. These numerical models, driven by the boundary conditions in the atmosphere and in the soil, require adequate knowledge of those vegetation and soil characteristics which are determinant in the characterisation of mass and energy transfers. In view of the fact that, firstly this information is often only partially known, and secondly the transfers are sometimes incorrectly represented, these models can rapidly drift and need to be regularly corrected. To this aim, remote sensing is a promising tool and many studies are currently devoted to the development of assimilation techniques to control their inputs or internal variables. The research presented in this paper contributes to this effort. Its ambition is to explore new methodologies, designed to make use of remote sensing thermal infrared data recorded from space. This study is based on the analysis of links between the characteristics of the diurnal cycle of the surface brightness temperature and the soil-atmosphere interface parameters and variables. The proposed methodology takes advantage of these temperatures cycling features, instead of absolute temperature values, to calibrate the LSM. The results show that the model parameters have a significant impact on the diurnal temperature dynamics, sometimes to a greater extent than on the temperature itself, and that these relationships have diurnal and seasonal variations. As a consequence, the use of TIR data for LSM calibration can be optimised by considering only those parts of the information which are really relevant to parameter calibration.     

Stability and control of nonlinear systems described by retarded functional equations: a review of recent results

This paper reports on recent results in a series of the work of the authors on the stability and nonlinear control for general dynamical systems described by retarded functional differential and difference equations. Both internal and external stability properties are studied. The corresponding Lyapunov and Razuminkhin characterizations for input-to-state and input-to-output stabilities are proposed. Necessary and sufficient Lyapunov-like conditions are derived for robust nonlinear stabilization. In particular, an explicit controller design procedure is developed for a new class of nonlinear time-delay systems. Lastly, sufficient assumptions, including a small-gain condition, are presented for guaranteeing the input-to-output stability of coupled systems comprised of retarded functional differential and difference equations.     

RAZUMIKHIN-TYPE THEOREMS OF NEUTRAL STOCHASTIC FUNCTIONAL DIFFERENTIAL EQUATIONS

The stability of stochastic functional differential equation with Markovian switching was studied by several authors,but there was almost no work on the stability of the neutral stochastic functional differential equations with Markovian switching.The aim of this article is to close this gap.The authors establish Razumikhin-type theorem of the neutral stochastic functional differential equations with Markovian switching,and those without Markovian switching.