A new process of extracting vanadium from stone coal

A new process of extracting vanadium from the stone coal vanadium ore in Fangshankou, Dtmhuang area of Gansu Province, China was introduced. Various leaching experiments were carried out, and the results show that the vanadium ore in Fangshankou is difficult to process due to its high consumption of acid and the high leaching rate of impurities. However, the leaching rate can be up to 80% and the content of V2O5 in the residue can be between 0.22%-0.25% in the process of ore fine grinding→oxidation roasting→mixing and ripen-ing→aqueous leaching→P2O4 solvent extraction→sulfiuie acid stripping→oxidation and precipitation→decomposition by heat. Also, the quality of flaky V2O5 produced by this process can meet the requirements of GB3283-87. The total leaching rate of vanadium is 70%. Also, three types of wastes are easy to treat. The vanadium extraction process is better in relation to the aspect of environmental protection than the sodium method.     

基于单片机线性F/V转换系统的设计与实现

研究了一种线性F∕V转换系统。利用单片机来检测正弦波的频率,根据检测的频率确定D/A转换的数字量,控制TLC5615串行D/A芯片将频率信号转变为电压信号,使输出电压与频率大小呈线性关系,而且它们的线性关系是不经过原点的直线,而现有的F/V转换的器件都不能满足这种要求。     

ICP-AES法测定Ti-6Al-4V合金中Al，V的质量分数

用电感耦合等离子体发射光谱（ICP—AEs）法测定了Ti-6Al—4V合金中Al,V的质量分数,研究了元素分析谱线、仪器分析参数、准确度和精密度等,确定了最佳实验条件．结果表明,该方法的加标回收率为101．3％-108．4％,RSD〈2．0％．该方法简便、快速、准确、精密度好,适用于合金中Al,V质量分数的测定．     

双余度高压无刷直流电机有限元分析

针对多电飞机的快速发展,设计了基于270 V的双余度高压无刷直流电机。根据双余度高压无刷直流电机的结构特点,建立了双余度高压无刷直流电机的数学模型,推导了双余度工作时的转矩计算公式。建立了双余度高压无刷直流电机的电磁场模型,并利用magnet对其进行了电磁场仿真,对比分析了单绕组工作时与双余度工作时的反电势、转矩、转速等。并建立了双余度高压无刷直流电机的磁热耦合分析模型,对其双余度工作时的热场进行了仿真。仿真结果表明:双余度高压无刷直流电机在运行过程中,可以达到与单绕组工作时相同的动态特性,转矩为单绕组工作时的2倍,且大大提高了系统的可靠性。     

Disruption of Secondary Attraction of the Spruce Beetle, Dendroctonus rufipennis, by Pheromones of Two Sympatric Species

Capture of spruce beetles, Dendroctonus rufipennis, in multiple-funnel traps baited with frontalin and -pinene was reduced by up to 42% in the presence of synthetic (+)-exo- and (+)-endo-brevicomin, aggregation pheromones of the sympatric species Dryocoeles affaber. (±)-endo-Brevicomin was inhibitory to spruce beetles in two experiments and (±)-exo-brevicomin was inhibitory in one experiment, reducing spruce beetle trap catches by up to 87% and 75%, respectively. Spruce beetle trap catches were also reduced by 85% by (±)- or (+)-ipsdienol, but not by (–)-ipsdienol. Ips tridens, a second sympatric species, produces both enantiomers of ipsdienol in its pheromone blend. Responses by D. affaber to its own pheromone were significantly enhanced by addition of the spruce beetle lure. Enantiospecific pheromones of secondary competing species, or less costly racemic substitutes, may be useful for managing spruce beetles using competitive displacement or exclusion. Baiting susceptible hosts with pheromones of secondary species may enhance attack by secondary species, while partially repelling spruce beetles.     

SAR成像应用特征分析及硬件设计空间讨论

合成孔径雷达SAR是一种主动式的对地观测系统.近年来SAR逐渐朝着多平台化发展,陆续出现了在无人机、探测车等小型移动平台上.SAR成像是运行在SAR上的成像程序,由于新的特殊运行环境的出现、其对低能耗和高算力有了更严格的要求.如何针对特定的平台,提供高性能、低功耗的应用支持,便成为其核心要点.对SAR成像计算和访存等特征进行了分析,针对性地进行了程序优化并测试了该程序在x86平台上的性能,以获得可靠的性能参考.在此基础上,面向DSP+FFT加速器的硬件结构,构建了一个算力配比数学模型,为硬件设计提供解决方案.     

基于视觉感知机制的织物疵点轮廓检测

针对传统人工织物疵点检测存在的误检及低效等问题,提出了一种基于视觉感知机制的自适应织物疵点轮廓检测方法.首先,模拟视觉系统中视网膜感受野对视觉信息的处理机制对织物疵点图像进行滤波及疵点增强;其次,依据初级视皮层(V1)区对视觉信息响应的方向选择性机制构建织物疵点图像边缘检测模型,实现对织物疵点图像的边缘检测.最后,采用自适应阈值选择的方法对检测到的边缘进行二次处理,获得织物图像疵点的轮廓.为验证本文方法的有效性和准确性,对4类织物疵点图像进行测试,并定性和定量两方面进行比较分析,结果表明文中提出的方法能够较好地检测出织物疵点轮廓信息,不仅可以得到质量较高的织物疵点轮廓图像,而且在整个检测过程中能够自适应的选择参数,避免受人的主观因素影响,具有实际的应用价值.     

钒微合金化H型钢表面裂纹研究与控制

分析了V微合金H型钢S450J0-T轧后表面裂纹的形成原因。结果表明,S450J0-T钢轧后裂纹主要是由于连铸过程中铸坯上细小裂纹所导致,并在轧制过程中扩展形成。通过对钢水成分进行控制以及连铸工艺进行优化,显著降低了该钢种轧后裂纹修磨率。     

复合正极材料xLiFePO_4·yLi_3V_2(PO_4)_3/C的合成及其电化学性能

以聚吡咯(PVP K60)为表面活性剂和碳源,采用流变相法合成了x Li Fe PO4·y Li3V2(PO4)3/C正极材料样品。利用扫描电子显微镜(SEM)、X射线衍射仪(XRD)对样品形貌和结构进行了测试;采用电池测试仪和电化学工作站对样品电化学性能进行了测试,分析了不同复合比(x:y)对其结构和电化学性能的影响。研究表明:复合材料中存在两相复合与元素掺杂两种效应;当复合比为5∶1时材料的电化学性能最优,在0.1和10 C倍率下放电容量分别达到162.7和104.6 m Ah·g-1,且具有良好的循环稳定性。     

川东北马路背须四段储层裂缝预测

根据马路背须四段现今构造特征,建立起该地区的地质模型,利用数值分析技术,模拟计算马路背须四段气藏岩体的古构造应力场和破裂接近程度系数（η）,结合岩石力学与构造地质学理论、野外裂缝观测结果以及实际生产资料,对马路背须四段裂缝发育程度、裂缝类型及产状进行综合预测,确立马路背翼部高陡带、背斜长轴及断裂带为裂缝的分布发育带,为下一步勘探部署提供依据.