Study of the effective parameters on mechanical and electrical properties of carbon black filled PP/PA6 microfibrillar composites

In this study the electrical and mechanical properties of microfibrillar polypropylene (PP)/polyamide6 (PA6) blend filled with super conductive carbon black (CB) have been investigated. In situ microfibrillar PP/PA6 composites filled with CB are produced using a single screw extruder equipped with a spinneret. Glycidyl methacrylate (GMA) grafted polypropylene (PP-g-GMA) is used as the compatibilizer. To investigate the effects of extensional flow on the microstructure, electrical and mechanical properties, three adaptors with various convergence angles were designed, prepared and applied between the extruder and the spinneret. To optimize the effects of processing and material parameters on the electrical and mechanical properties, the Taguchi method of experimental design is used. Material and processing factors which are studied include: concentration of PA6, compatibilizer level, CB concentration, drawing speed of melt spinning line, adaptor angle, order of mixing and temperature profile along the extruder. The results show an increase in DC conductivity of up to 10¹¹ times in comparison with pure PA6, by increasing the concentration of CB, drawing speed, adaptor angle and optimizing other parameters. By optimizing processing and material factors studied here, strength of microfibrillar structured composites is increased of up to 80% in comparison to pure PP.     

Compatibility between Polyamide 6 and Polycarbonate

Polyamide （PA6） and polycarbonate （PC） were prepared by a Brabender mixer （ PLV- 151） at 240℃ with 30 rpm for duration of 8 and 6 minutes respectively. The epoxy resin （E） addition can lead to substantial microstructural changes in the PA6/PC blends. Scanning electron microscope （SEM） was used to observe the mixtures characterized by the domains of clearly segregated homophases and voids between the two polymers. PA6/PC of polyamide 6 and polycarbonate with epoxy resin addition under the composition ratio of 20/80, 20/80/1, 40/60/1 and 40/60, were tested to verify the key role of epoxy in promoting the compatibility of PA6 with PC during blending.     

Structural modelling of coprecipitated VTiO catalysts

A statistical study of the particle shape and size of pure V₂O₅ and TiO₂, and samples of coprecipitated V₂O₅---TiO₂ catalysts with different V/Ti ratios, has been performed. They were also characterized by XRD, EDAX, SEM and XPS. The results showed that pure vanadium pentoxide is compose by large square or needle-shaped particles, while pure titanium dioxide has small and rounded ones. VTiO samples presented an area and shape, depending on the V/Ti ratio.

These results and the spectroscopical characterization conducted to a particle model of the catalysts. Those VOTi samples with high V/Ti ratio would have large V₂O₅ crystals acting as support of a V/TiO₂ solid solution. In contrast, those samples with a low V/Ti ratio, would have the solid solution supporting vanadium pentoxide crystals.     

一类三元线性分组码的译码

Ｐｌｅｓｓ［１］证明了三元（１２，６，６）Ｇｏｌａｙ码具有一种双层结构，并据此给出了该码的快速硬判决译码算法。本文推广了Ｇｏｌａｙ码的Ｐｌｅｓｓ结构，给出了由三元（ｎ，ｋ，ｄ）线性分组码构造的三元（３，ｎ＋ｋ，≥ｍｉｎ（ｎ，２ｄ，６））线性分组码，其中包括（１２，６，６）Ｇｏｌａｙ码和（１８，９，６）码，并以三元（１８，９，６）码为例给出了这类码的最大似然软判决译码算法。     

尼龙6表面金属(Ni)化膜材料的制备及性能研究

用化学还原法制得了尼龙６表面金属（Ｎｉ）化膜材料。研究了还原条件，金属盐浓度对膜材料电性能的影响，以及膜材料的电发热性能，用光电子能谱和扫描电子显微镜对其表面及形貌进行了表征。     

6-Phospho-{beta}-galactosidases of Gram-positive and 6-phospho-{beta}-glucosidase B of Gram-negative bacteria: comparison of structure and function by kinetic and immunological methods and mutagenesis of the lacG gene of staphylococcus aureus

The 6-phospho-ß-galactosidase of Staphylococcus aureus,Lactococcus lactis and Lactobacillus casei and 6-phospho-ßglucosidaseB of Escherichia coli build a subfamily inside a greater enzymefamily, named the glycosal hydrolase family 1, which, hi addition,contains nine ß-glycosidases of different origins.Kinetic and immunological evidence is provided in this reportwhich strengthens the relationship of the four 6-phospho-ß-glycosidases.It is shown that the 6-phospho-ß-galactosidases and6-phospho-ß-glucosidase B are able to split aromaticß-galactoside phosphates and ß-glucosidephosphates. The turnover numbers of hydrolysis of substrateswith different epimerization at C-4 of the glycon vary up to15-fold only. Two polydonal antisera, one derived against thenative 6-phospho-ß-galactosidase from S.aureus andthe other derived against the 6-phospho-ß-glucosidaseB, cross-reacted with both enzymes. Peptides of the proteinswere separated by reverse phase HPLC. The cross-reacting peptideswere sequenced and shown to be localized at almost the sameposition in the aligned primary structures of both enzymes.An insertion of nine amino adds near these antigenic domainsis unique for the 6-phospho-ß-glycosidases and missingwithin the sequences of the ß-glycoside-specific membersof the family. The lacG gene of a 6-phospho-ß-galactosidasenegative S.aureus mutant was doned into E.coli and sequenced.In the totally inactive mutant protein only the glycine at position332 was changed to an arginine. This amino acid is part of thesequence insertion near the antigenic domain reacting with bothantisera. These data support the assumption that the regionis of great importance for the function of the enzymes and thatit is possible it determines the specificity of the phosphorylatedform of the substrates. In addition, the 6-phospho-ß-galactosidaseof S.aureus was modified by sitedirected mutagenesis of thecorresponding lacG gene hi order to replace residues Glul60and Glu375, which were suspected of being involved hi the generalacid catalysis of substrate hydrolysis, with glutamine residues.The mutant protein 160EQ retained some catalytic activity whilethe protein 375EQ was totally inactive. Glu375 is the activesite nudeophile of the 6-phospho-ß-galactosidase ofS.aureus. It is located in the sequence motif ENG where Glu358was identified as the catalytkally active nudeophile hi theß-glucosidase of Agrobacterium.     

Film morphology and reaction rate for the CVD of tungsten by the WF6—SiH4 reaction

Journal of Electronic Materials - Low pressure chemical vapor deposition (LPCVD) of tungsten (W) by SiH4 reduction of WF6 on Si(100) surfaces was studied in a single-wafer, cold-wall reactor over a...     

邻异丙基酚的生产及应用

介绍了邻异丙基酚国内外研制、生产和应用情况，以及２，６－二异丙基酚的用途。     

6 kV变频电缆终端头的制作与安装

本文结合某铝带材热连轧机组现场安装实例，详细介绍6kV变频电缆终端头的制作与安装过程。