浮法硼硅酸盐玻璃下表面渗锡的研究

根据实验样品的成分,制定一定的浮法成型的温度制度,采用自制小型石墨锡槽,模拟硼硅酸盐玻璃的浮法成型过程,用电子探针结合能谱仪,测试浮法硼硅酸盐玻璃在1250~650℃温度范围内不同温度段下表面渗锡的分布情况,研究硼硅酸盐玻璃不同于传统钠钙硅浮法玻璃的渗锡特点。研究结果表明,在特定的浮法工艺制度下,硼硅酸盐玻璃渗锡的深度达到40μm左右,并且高温段锡离子以纵向深度扩散为主,低温下锡离子主要在玻璃的近表面富集。在浮法成型的过程中,渗锡的分布曲线上会出现卫星峰,但是最终在出锡槽的温度下渗锡曲线是单调递减的。     

PHASE-SPACE DIFFUSION EQUATIONS FOR SINGLE BROWNIAN PARTICLE MOTION NEAR SURFACES

In numerous physical processes involving the motion of micron and submicron sized particles near surfaces, such as the filtration of hydrosols and aerosols, the particle motion is the net result of the combined effects of fluid convection, external forces, particle inertia, Brownian particle motion, and particle-surface fluid dynamic interactions. The most general method of describing particle motion under the combined action of these effects is through the so-called Fokker-Planck equation. In the absence of particle-surface fluid dynamic interactions, the Fokker-Planck equation is well-known, and it has been applied in a general way to problems involving the adsorption or deposition of Brownian particles onto surfaces through a solution technique known as the Brownian dynamics simulation method.

In this study, the Fokker-Planck equation for Brownian particle motion near surfaces is generalized to include particle-surface fluid dynamic interactions. The Fokker-Planck equation is shown to follow from the Liouville equation for the Brownian particle and n-fluid molecules present in the system, thus, establishing a firm theoretical foundation for the Fokker-Planck equation and the various other phase-space diffusion equations that follow from it.

Based on diagonalization of the Fokker-Planck equation, its short-time behavior is also derived here which enables a generalization of the Brownian dynamics method for the study of particle motion near surfaces including fluid dynamic interactions. Additionally, a perturbation solution of the Fokker-Planck equation under the conditions of small, but finite particle Stokes number is also derived. These solutions are shown to agree with previously given representations of the Smoluchowski or convective-diffusion equation for Brownian particle motion near surfaces, as well as with inertial corrections to the Smoluchowski equation available in the literature. This latter equation is also generalized here to include particle-surface fluid dynamic interactions.     

瓷质砖湿坯对流干燥过程的传热传质研究

引用建立于Whitaker的体积平均方程和Darcy定律基础止的多孔介质内部热质传递的等效耦合扩散模型，寻出一组关于液体饱和度、温度和气相压力的新支配方程，应用该方程组对瓷质砖坯体干燥过程进行了数值分析和实验测定。在平均含湿饱和度的变化方面，数值解与实验结果十分吻合。还改变影响坯体干燥过程的一些因素进行计算机模拟计算，通过改变这些因素的大小来考察计算结果，以期获得某些定性或定量的结论，从而用以指导实际生产过程。     

Distributed control of nonlinear diffusion systems by input–output linearization

This paper addresses the distributed control by input–output linearization of a nonlinear diffusion equation that describes a particular but important class of distributed parameter systems. Both manipulated and controlled variables are assumed to be distributed in space. The control law is designed using the concept of characteristic index from geometric control by using directly the PDE model without any approximation or reduction. The main idea consists in the control design in assuming an equivalent linear diffusion equation obtained by use of the Cole–Hopf transformation. This framework helps to demonstrate the closed‐loop stability using some concepts from the powerful semigroup theory. The performance of the proposed controller is successfully tested, through simulation, by considering a nonlinear heat conduction problem concerning the control of the temperature of a steel plate modeled by a nonlinear heat equation with Dirichlet boundary conditions. Copyright © 2012 John Wiley & Sons, Ltd.     

A Numerical Sirnulation of Gas-Particle Two-Phase Flow in a Suspension Bed Using DifFusion Flux Model

A mathematical modei of two-dimensional turbulent gas-particle twophase flow based on the modified diffusion flux modei (DFM) and a numerical simulation method to analyze the gas-particle flow structures are developed. The modified diffusion flux modei, in which the acceleration due to various forces is taken into account for the calculation of the diffusion velocity of particles, is applicable to the analysis of multi-dimensional gas-particle two-phase turbulent flow. In order to verify its accuracy and efficiency, the numerical simulation by DFM is compared with experimental studies and the prediction by k-ε-kp two-fluid modei, which shows a reasonable agreement. It is confirmed that the modified diffusion flux modei is suitable for simulating the multi-dimensional gas-particle two-phase flow.     

A growth mark method for studying growth mechanism of carbon nanotube arrays

A novel and simple growth mark method was developed to make marks during the growth process of carbon nanotube arrays. These marks can be read out under scanning electron microscope or optical microscope. Based on this method, the growth rates at different temperatures and under different acetylene partial pressures were measured, from which the activation energy and the order of reaction were determined. Based on our experimental results, the growth of carbon nanotube arrays in our experimental condition could not be diffusion-limited. The measured activation energy could possibly be attributed to the heterogeneous decomposition of acetylene over the catalyst particle. Furthermore the marked array with special segmental structure may be found some applications in the future.     

Sorption/diffusion of aqueous mixtures of 1,4‐dioxane/tetrahydrofuran through blend membranes of poly(vinyl alcohol) and sodium alginate: Their compatibility and pervaporation separation studies

Blend membranes of poly(vinyl alcohol) (PVA) and sodium alginate (NaAlg) were prepared by solution casting and crosslinked with glutaraldehyde (GA). Polymer blend compatibility was studied in water by measuring solution viscosity at 30°C. From the viscosity data, interaction parameters were determined to find the blend compatibility. Thickness of the membranes ranged between 35 and 40 μm. Circular disc‐shaped samples were cut from the thin membranes to perform gravimetric sorption experiments in water + 1,4‐dioxane and water + tetrahydrofuran mixtures at 30°C. Diffusion coefficients were calculated using Fick's equation. Concentration profiles of liquids were computed by solving Fick's equation under suitable boundary conditions. Diffusion coefficients show a dependence on the composition of the blends as well as composition of binary mixtures. A correlation was attempted between concentration profiles and diffusion coefficients of the transporting liquids. Degree of swelling and sorption coefficients were calculated from the gravimetric sorption data. Sorption kinetics was studied using an empirical equation to understand the nature of sorption–diffusion anomalies. Membrane selectivity for water + 1,4‐dioxane and water + tetrahydrofuran mixtures were calculated from the pervaporation experiments. A correlation between sorption and membrane selectivity was attempted. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 178–188, 2005     

活性屏离子氮化过程中氮的输运机理分析

将活性屏离子氮化过程中活性氮原子的输运方式分为无输运介质的扩散输运与有输运介质的吸附输运两种,指出扩散输运是活性氮原子的重要输运方式之一。此外,还重新分析了文献报道的活性屏离子氮化实验结果,阐述了活性屏材质等因素对氮化效果的影响。     

一类相异功能反应的predator-prey扩散系统的稳定性

针对斑块生境下具有庇护所效应的相异功能性反应predator-prey扩散系统,讨论了系统持续生存的条件.运用常微分方程定性理论讨论了系统解的有界性,通过构造Lyapunov函数得到了一定条件下该系统正解是全局渐近稳定的.进一步利用Pioncare定理和Brower定理证明了惟一周期正解的存在性与稳定性.     

Solid state interfacial reactions in electrodeposited Ni/Sn couples

Ni/Sn couples,prepared by sequentially electroplating Ni layers and Sn layers on metallized Si wafers,were employed to study the mierostructures and growth kinetics of Ni-Sn intermediate phases,when the Ni/Sn couples were aged at room temperature or annealed at temperatures from 150 to 225℃for various times.The results show that the NiSn phase and Ni_3Sn_4 phase are formed,respectively,in the aged couples and annealed couples.The Ni_3Sn_4 layer is continuously distributed between the Ni and Sn sides in t...