用粉体表面改性技术制备拒水粉

拒水粉是一种新型建筑防水材料，被称之为神奇的粉末。本文就如何利用粉体表面改性技术制备拒水粉，从理论上和具体的实验方法上作了详尽的说明。     

日本α－Al_2O_3粉体进展

综述了日本近１０多年来α－Ａｌ２Ｏ３粉体的发展状况。特别介绍了日本对α－Ａｌ２Ｏ３粉体的标准化工作。这对提高电子陶瓷等产品的质量是非常重要的。     

颗粒表面改性法制备PTC粉体的研究

本文介绍了一种通过液相颗粒表面改性技术添加二次掺杂物来制备ＰＴＣ粉体的新方法。即将烧结助熔剂Ａｌ２Ｏ３，ＳｉＯ２以及受主杂质ＭｎＯ采用溶液形式，包裹在ＢａＴｉＯ３基粉体颗粒表面进行改性，由此可以得到二次掺杂物Ａｌ２Ｏ３、ＳｉＯ２和ＭｎＯ分布均匀的ＰＴＣ粉体。     

50kg／m钢轨轨底缺陷的检验和分析

钢轨轨底缺陷有三种：底伤、结疤和底裂缺陷。取２０根有底缺陷５０ｋｇ／ｍＵ７１Ｍｎ钢轨做试样，通过低倍、断口、金相检验和扫描电能谱分析，详细描述了轨底缺陷的宏观和微观特征，研究出钢轨轨底缺陷出现的规律臁其产生的原因。通过对比试验，发现淄博１号保护渣有利于改善钢锭表面质量，提高钢轨一级品率。     

New Ferro Powder for Selective Laser Sintering of Dense Parts

The paper describes a new powder composition specially developed for selective laser sintering (SLS). The aim is to obtain a ferro powder that can be sintered without need for a (sacrificial) polymer binder and that results in quasi dense parts that do not need any post-processing like furnace sintering, infiltration or HIP. The powder is a mixture of different types of particles (Fe, Cu, Ni and Fe₃P). The composition and mixture ratio are justified by using phase diagrams. The powder has been tested using an own developed Nd: YAG SLS machine. The influence of process parameters (laser power, scan velocity, scan spacing and scan strategy) and the microstructural characteristics have been investigated. Attention is devoted to the binding mechanism (liquid phase sintering, through melting) and to the quality of resulting parts (density, balling effect,…).     

佛尔哈德法测定氯化除汞上清液中的氯量

控制pH4-6，用锌粉还原氯化除汞上清液中的汞（Ⅱ）离子，取置换后液加入过量的硝酸银标准溶液，以硫酸铁铵溶液作指示剂，用硫氰酸钾标准滴定溶液滴定来测定氯量。该方法的检出限：0．25mg／100mL，回收率：98％-101％。     

防水粉憎水膜形成机理及稳定性的研究

通过对防水粉憎水膜形成途径的探索，提出了憎水膜形成过程的基本假设，利用微观测试方法证实了憎水膜层的存在．试验并研究了防水粉长期稳定性的诸多问题。     

Optimal Conditions for Preparing Ultra-Fine CeO2 Powders in A Submerged Circulative Impinging Stream Reactor

Cerium carbonate powders were produced in a submerged circulation impinging stream reactor (SCISR) from Ce(NO3)3·6H2O. NH4HCO3 was used as a precipitant in the reaction. Cerium carbonate powders were roasted to produce ultra-fine cerium dioxide (CeO2) powders. The optimal conditions of such production process were obtained by orthogonal and one-factor experiments. The results showed that ultra-fine and narrowly distributed cerium carbonate powders were produced under the optimal flowing conditions. The concentrations of Ce(NO3)3 and NH4HCO3 solutions were 0.25 and 0.3 mol·L-1, respectively. The concentration of PEG4000 added in these two solutions was 4 g·L-1. The stirring ratio, reaction temperature, feeding time, solution pH, reaction time and digestion time were 900 r·min-1, 80 ℃, 20 min, 5～6, 5 min and 1 h, respectively. The final product, CeO2 powders, was obtained by roasting the produced cerium carbonate in air for 3 h at 500 ℃. The finally produced CeO2 powders were torispherical particles with a narrow size distribution of 0.8～2.5 μm. The crystal structure of CeO2 powders belonged to cubic crystal system and its space point group was O5H-FM3M. Under optimal conditions, powders produced by SCISR were finer and more narrowly distributed than that by Stirred Tank Reactor (STR).     

Advances in titanium metal injection molding

The approaches to production of titanium powder injection molded parts are reviewed. Historically, oxygen levels have been too high for structural use (particularly with the Ti-6Al-4V alloy). However, recent advances in starting powders, binders and sintering facilities now allow oxygen levels in the Ti-6Al-4V alloy to be controlled to about 0.2 wt.% oxygen. This should result in significant expansion of the titanium PIM market place into aerospace, automobiles, surgical instruments, dentistry, communication devices (such as computers and cell phones), knives and guns. __________ Translated from Poroshkovaya Metallurgiya, Vol. 46, No. 5–6 (455), pp. 118–125, 2007.     

Preparation of ultra fine nickel-copper bimetallic powder for BME-MLCC

The preparation of ultra fine nickel-copper bimetallic powder with two-stage chemical reduction method was investigated. Reductive sugar and hydrazine hydrate were employed as reducing agent in different reductive stage, respectively. Reaction of CuSO₄·5H₂O with reductive sugar at 70 °C gives cuprous oxide and copper particles, then as-prepared mixture and nickelous hydroxide were reduced by hydrazine hydrate, and nickel-copper powder having excellent dispersibility was prepared. Influences of nickel added on composition and dispersibility of powder were studied. TG/DTG/DTA of nickel-copper powder, which is stable in room temperature, were discussed with thermal analyzer. Relation of nickel content to oxidation temperature was investigated. Ni-Cu bimetallic powder particles have a fully coated structure when nickel content is up to 30%. As-prepared nickel-copper powder was applied in base metal electrode-multilayer ceramic capacitor (BME-MLCC). The end termination has high adhesion force, fairly good densification, low resistivity, excellent solderibility behavior and resistance behavior to soldering.