Probabilistic and interval reliability design of the composite pressure vessel

Considering the randomness or interval character of physical parameters and applied loads of composite pressure vessels (COPV), the COPV reliability-analyzing model is built. And then the computational expressions for the mean value, standard deviation and deviation of fiber stress are deduced by the random factor method. The probabilistic and interval reliability designs on COPV are implemented by utilizing the probabilistic method and interval method combined with the improved particle swarm optimization (PSO) algorithm, respectively. The influence of fluctuation of structure uncertain parameters on COPV design thickness is inspected. Finally, examples are given to demonstrate that both probabilistic and interval reliability methods can satisfy the safety requirement and both are of higher rationality than the traditional safety factor method. And probabilistic method has a lower relative error but a higher computational complexity contrasted with the interval method.     

An automatic parameter calibration method for the SWAT model in runoff simulation

Runoff simulation is highly significant for hydrological monitoring, flood peak simulation, water resource management, and basin protection. Runoff simulation by distributed hydrological models, such as the soil and water assessment tool (SWAT) model which is the most widely used, is becoming a hotspot for hydrological forecasting research. However, parameter calibration is inefficient and inaccurate for the SWAT model. An automatic parameter calibration (APC) method of the SWAT model was developed by hybrid of the genetic algorithm (GA) and particle swarm optimization (PSO). Multi‐station and multi‐period runoff simulation and accuracy analysis were conducted in the basin of the Zhangjiang River on the basis of this hybrid algorithm. For example, in the Yaoxiaba Station, the calibration results produced an R² of 0.87 and Nash Sutcliffe efficiency (NSE) index of 0.85, while verification results revealed an R² of 0.83 and NSE of 0.83. Results of this study show that the proposed method can effectively improve the efficiency and simulation accuracy of the model parameters. It can be concluded that the feasibility and applicability of GA‐PSO as an APC method for the SWAT model were confirmed via case studies. The proposed method can provide theoretical guidance for many hydrological research fields, such as hydrological simulation, flood prevention, and forecasting.     

电控柴油机分缸均衡控制算法及试验

柴油机各个气缸的进气量、喷油量、燃烧等存在差异,导致气缸间存在做功差异,直接影响柴油机转速的平稳性以及排放性能等。针对位置式电控柴油机,采用PI闭环控制,通过瞬时转速信号识别并计算各缸的工作差异,利用分缸均衡控制算法对油量进行补偿修正。试验结果显示低转速稳态工况转速波动由7 r/min降至3 r/min,各缸工作不均匀度由±5 r/min降至±2 r/min,在瞬态过程和高转速3 400 r/min时该算法仍然适用有效。     

基于改进Kendall-f算法的发电机定子温度分析

在线监测发电机定子温度可有效发现定子部分过热性故障,如何从检测的温度数据中提取反映定子故障预警的信息是目前国内外研究的热点。该文采用可变窗改进Kendall-f算法处理监测温度数据,提取其变化趋势特征信息;采用偏度分析提取监测温度异常值,从而正确诊断定子过热性故障,仿真分析及实验结果表明该方法有效提高了定子温度监测与预警的准确率。     

模具生产联合体加工作业统一调度问题的研究

模具生产联合体是由小规模企业组成的模具设计、制造联盟，由于设备、工装和人员分属于不同的加盟企业，其作业排序过程非常复杂。为此提出一种复合式模具生产联合体的生产排序方法：依据基本优先规则首先完成单一工序作业，然后对多工序作业用改进遗传算法进行工艺优化，求出最优解和次优解，再使用评价函数法选择最佳作业路线。该方法在生产试验中取得了良好的成效．能较好满足模具用户和加盟企业两方面的需要。     

Dual–primal proximal point algorithms for extended convex programming

This paper presents a class of dual–primal proximal point algorithms (PPAs) for extended convex programming with linear constraints. By choosing appropriate proximal regularization matrices, the application of the general PPA to the equivalent variational inequality of the extended convex programming with linear constraints can result in easy proximal subproblems. In theory, the sequence generated by the general PPA may fail to converge since the proximal regularization matrix is asymmetric sometimes. So we construct descent directions derived from the solution obtained by the general PPA. Different step lengths and descent directions are chosen with the negligible additional computational load. The global convergence of the new algorithms is proved easily based on the fact that the sequences generated are Fejér monotone. Furthermore, we provide a simple proof for the O(1/t) convergence rate of these algorithms.     

一种面向空地一体化组网的体系架构

空间网络是空地一体化组网中地面网络延伸的重要组成部分。针对空间网络为移动星座的场景,传统的空地一体化组网模型将空间网络视为独立自治域,利用边界网关协议将空间网络与地面自治域互联起来,最大化同地面网络保持兼容。然而,传统组网模型存在边界网关面临频繁会话中断或大量路由更新等问题。通过重新审视空间网络的角色定位和边界划定问题,提出一种面向空地一体化组网的体系架构Slink。Slink的核心思想是空间网络为地面网络提供互联通道,利用星地网关隔离空地两网间的路由更新。实验仿真表明,Slink体系架构能够有效减小对空间路由器的路由存储空间需求,降低星地网络间的带宽消耗。     

一种相控阵天线安装精度检测与校准

文中论述了一种相控阵雷达天线安装后的精度检测方法。按照雷达天线安装后的几何形态,采用光学测量仪器进行相关的数据采集,建立检测的数学模型,利用线性回归法以及最小二乘法进行数据拟合,计算出安装后雷达天线底面与水平面的最大夹角和天线边缘与正北方向的夹角,并进行了试验误差评估和分析,依据检测数据对雷达天线的水平和方位角度进行校...     

基于无线网络的森林防火系统的研究与改进

论文针对现行的无线传感器技术方式的森林防火系统中的弊端,提出了一种改进的系统设计方案.改进后的方案主要采用二级Ad-Hoc模式的网络,对传统的无线传感器进行有效的改造的同时,也增加了稳定可靠的中心网络节点,无线通信网络采用改进后的AODV作为多跳路由协议,中心节点的数据处理采用卡尔曼滤波预处理,数据发送采用ALOHA机制进行随机延迟发送.系统经过反复实验,最终验证并总结出一套可以有效应用于实际工程中的系统部署方案.