Concurrent error detection of fault-based side-channel cryptanalysis of 128-bit RC6 block cipher

Fault-based side channel cryptanalysis is very effective against symmetric and asymmetric encryption algorithms. Although straightforward hardware and time redundancy based concurrent error detection (CED) architectures can be used to thwart such attacks, they entail significant overhead (either area or performance). In this paper we investigate two systematic approaches to low-cost, low-latency CED for symmetric encryption algorithm RC6. The proposed techniques have been validated on FPGA implementations of RC6, one of the advanced encryption standard finalists.     

6to4与ISATAP技术相结合的IPv6网络实现

在IPv4向IPv6过渡期间,多种过渡技术可以互相支持、互相组合使用,以达到互利互助。简要介绍了其中2种隧道技术:6to4技术和ISATAP技术,提出了1种基于两者结合的新型实验网络的实现方案。具体讨论了在Linux下如何组建这种新型实验网络平台,详细阐明了如何配置IPv6主机以及双栈路由器,为IPv4过渡到IPv6提供1个可行的方案。     

2，6-萘二甲酸二甲酯在有机溶剂中溶解度的测定与关联

Solubility of dimethyl-2,6-naphthalene dicarboxylate in acetic acid, N,N-dimethylfonnamide, N,N-dimethyl acetamide, dimethyl sulphoxide, and N-methyl-2-ketopyrrolidine were determined using a dynamic method. The measured systems were correlated by UNIFAC group contribution method. A new main group （aromatic ester, ACCOO） was defined to express the activity coefficients of the aromatic ester. New interaction parameters of the ACCOO group were expressed as the first-order function of temperature and were determined from the experimental data. The calculated results for the new interaction parameters were satisfactory. The measured systems were also correlated with the Wilson and 2-h models, and the results were compared with those of the UNIFAC model.     

Towards a new definition of EPOC parameters for anionic electrochemical catalysts: case of propene combustion

The electrochemical promotion of catalysis (EPOC) of propene combustion was investigated using Pt sputtered thin film on an O²⁻ conductor, 8 mol% Y₂O₃-stabilized-ZrO₂ (YSZ). In order to separate the influence of the thermal migration of the O²⁻ oxide ions from the electrolyte to the catalyst surface and the impact of an electrical polarization on the catalytic activity, several light-off experiments (cool down and heat up procedures) were successively performed under different polarizations, i.e. OCV, +2 and −2 V. These experiments have clearly shown that the presence of O²⁻ (thermally or electrochemically induced) inhibits the catalytic activity of the platinum for the propene deep oxidation. These results demonstrate the importance to define a normalized rate enhancement ratio, ρ _n , from a reference value of the catalytic rate corresponding to a Pt surface state free of O²⁻ ions.     

Applications and exploitation of Virtual Instruments based on Delphi6

This paper introduces hardware connections between computer and intellectualized instrument based on 89c51 sin-glechip .It gives the techniques to compile internet applications of Virtual Instruments with Delphi6.     

Study of the effective parameters on mechanical and electrical properties of carbon black filled PP/PA6 microfibrillar composites

In this study the electrical and mechanical properties of microfibrillar polypropylene (PP)/polyamide6 (PA6) blend filled with super conductive carbon black (CB) have been investigated. In situ microfibrillar PP/PA6 composites filled with CB are produced using a single screw extruder equipped with a spinneret. Glycidyl methacrylate (GMA) grafted polypropylene (PP-g-GMA) is used as the compatibilizer. To investigate the effects of extensional flow on the microstructure, electrical and mechanical properties, three adaptors with various convergence angles were designed, prepared and applied between the extruder and the spinneret. To optimize the effects of processing and material parameters on the electrical and mechanical properties, the Taguchi method of experimental design is used. Material and processing factors which are studied include: concentration of PA6, compatibilizer level, CB concentration, drawing speed of melt spinning line, adaptor angle, order of mixing and temperature profile along the extruder. The results show an increase in DC conductivity of up to 10¹¹ times in comparison with pure PA6, by increasing the concentration of CB, drawing speed, adaptor angle and optimizing other parameters. By optimizing processing and material factors studied here, strength of microfibrillar structured composites is increased of up to 80% in comparison to pure PP.     

Compatibility between Polyamide 6 and Polycarbonate

Polyamide （PA6） and polycarbonate （PC） were prepared by a Brabender mixer （ PLV- 151） at 240℃ with 30 rpm for duration of 8 and 6 minutes respectively. The epoxy resin （E） addition can lead to substantial microstructural changes in the PA6/PC blends. Scanning electron microscope （SEM） was used to observe the mixtures characterized by the domains of clearly segregated homophases and voids between the two polymers. PA6/PC of polyamide 6 and polycarbonate with epoxy resin addition under the composition ratio of 20/80, 20/80/1, 40/60/1 and 40/60, were tested to verify the key role of epoxy in promoting the compatibility of PA6 with PC during blending.     

一类三元线性分组码的译码

Ｐｌｅｓｓ［１］证明了三元（１２，６，６）Ｇｏｌａｙ码具有一种双层结构，并据此给出了该码的快速硬判决译码算法。本文推广了Ｇｏｌａｙ码的Ｐｌｅｓｓ结构，给出了由三元（ｎ，ｋ，ｄ）线性分组码构造的三元（３，ｎ＋ｋ，≥ｍｉｎ（ｎ，２ｄ，６））线性分组码，其中包括（１２，６，６）Ｇｏｌａｙ码和（１８，９，６）码，并以三元（１８，９，６）码为例给出了这类码的最大似然软判决译码算法。     

尼龙6表面金属(Ni)化膜材料的制备及性能研究

用化学还原法制得了尼龙６表面金属（Ｎｉ）化膜材料。研究了还原条件，金属盐浓度对膜材料电性能的影响，以及膜材料的电发热性能，用光电子能谱和扫描电子显微镜对其表面及形貌进行了表征。