激光散斑干涉法测定干涉螺接孔边应力分布

本文提出一种测量孔边干涉螺接应力分布的新实验方法,用激光散斑干涉技术测量出由干涉螺接应力形成的孔周位移场分布,进而确定孔这应力分布,在保证测量精度同时,该方法体现出了简单,实用,有效等优点。     

Nitrogen plasma modification of viscose-based activated carbon fibers

Viscose-based activated carbon fibers (VACFs) were treated by a dielectric-barrier discharge plasma at different conditions. Nitrogen was used as the feed gas to create nitrogen radicals. The textural characteristics were analyzed by SEM, BET and XRD. The surface chemical functional groups were analyzed by XPS. The results show that after nitrogen plasma modification (NPM), the external surface of the VACFs was etched and became rougher, the surface area and pore volume decreased, the average micropore width barely changed, the PSD of the VACF became narrower and the graphitic crystallites of VACF had been destroyed slightly. XPS revealed that NPM could remarkably change the distribution of the oxygen functional groups on the VACFs surface and there were more nitrogen atoms incorporated into the aromatic ring. A tentative explanation for the modification process is proposed.     

Photoelectronic and transport properties of polypyrrole doped with a dianionic dye

Polypyrrole (PPy) doped with dodecylsulfate (DS) and an organic dye (indigo carmine, IC) was electrochemically prepared and characterized by Raman spectroscopy and X-ray diffraction (XRD). The photoelectrochemical properties of PPy-DS and PPy-DS-IC in contact with an electrolytic solution containing a redox couple were studied using the theories for the semiconductor ∣ electrolyte interface. Results indicate that the system containing IC presents a higher photocurrent density under polychromatic illumination and faster response time when compared with PPy-DS. This fact was assigned to the formation of molecular-scale paths in PPy-DS-IC. The IC molecules lying perpendicularly between PPy chains, as confirmed by the X-ray analysis, could facilitate the mass transport at the interface and increase the ordering degree to provide better electronic charge transfer in the bulk. Although the photoelectrochemical devices presented here do not present all the properties of inorganic-based devices, we discuss some strategies to enhance the photoelectrochemical properties and response time of conducting polymers used in these type of systems.     

Fluctuation X-ray microscopy: a novel approach for the structural study of disordered materials

Measuring medium‐range order is a challenging and important problem in the structural study of disordered materials. We have developed a new technique, fluctuation x‐ray microscopy, that offers quantitative insight into medium‐range correlations in disordered materials at nanometre and larger length scales.In this technique, which requires a spatially coherent x‐ray beam, a series of speckle patterns are measured at a large number of locations in a sample using various illumination sizes. Examination of the speckle variance as a function of the illumination spot size allows the structural correlation length to be measured. To demonstrate this technique we have studied polystyrene latex spheres, which serve as a model for a dense random‐packed glass, and for the first time have measured the correlation length in a disordered system by fluctuation X‐ray microscopy. We discuss data analysis and procedures to correct for shot noise and detector noise. This approach could be used to explore medium‐range order and subtle spatial structural changes in a wide range of disordered materials, from soft matter to nanowire arrays, semiconductor quantum dot arrays and magnetic materials.     

Structural and electrical measurements of CdZnSe composite

TheI—Vcharacterization and the electrical resistivity of selenium rich Se₈₅Cd_15-xZn_x (x = 0, 3, 7, 11 and 15) system at room temperature have been studied. Samples were obtained using melt cooling technique. So prepared samples were then characterized in terms of their crystal structure and lattice parameter using X-ray diffraction method. The materials were found to be poly crystalline in nature, having zinc blend structure over the whole range of zinc concentration. The measurements ofI—V bdcharacteristics have been carried out at different temperatures from room to 140°C. The electrical resistivity of the samples with composition at room temperature has been found to vary between maximum 2.7 x 10⁸ Ωm and minimum 7.3 x 10⁵ Ωm and shows a maximum at 3 at. wt.% of Zn. The carrier activation energy of the samples with composition has also been determined and found to vary from 0.026 eV to 0.111 eV.     

双能X射线骨密度仪测定技术研究

以Ｌｕｎａｒ公司ＤＰＸ－Ｌ型双能Ｘ射线骨密度仪为例，研究引起测量误差的主要因素并提出质控措施。用自检模块、腰椎体膜评定仪器的体外测量精度好于１％。对１０位志愿者重复２次测量，体内精度对腰椎，ＭＰＤ（平均百分差）为０．４６，ＣＶ（变异系数）为０．７５；对股骨颈，ＭＰＤ为１．２６、ＣＶ为０．４７；Ｗａｒｄ’ｓ三角区ＭＰＤ为２．０１、ＣＶ为１．１４；大转子ＭＰＤ为１．６６、ＣＶ为０．７２。扫描图像由２位     

Twinning of YBa2Cu3O7 thin films on different substrates

The twinning of YBa₂Cu₃O₇ (YBCO) thin films with c-axis orientation on (001) MgO, (001) SrTiO₃, (012) LaAlO₃, (110) NdGaO₃ and (001) NdGaO₃ substrates, prepared by laser ablation, has been examined using a combination of and θ/2θ scans at a four-circle diffractometer. On all substrates, except for (001) NdGaO₃, the tetragonal to orthorhombal phase transition results in four different orientations of YBCO twins relating to the substrate. On (001) NdGaO₃ only two different twin orientations, accompanied by a slight lattice monoclinization, has been observed.     

Structure of carbon nanotubes probed by local and global probes

A review is proposed of different techniques available today for the characterization of the atomic structure of carbon nanotubes. This review covers the electron microscopies, various diffraction techniques, scanning probe microscopies, and optical spectroscopies, including Raman scattering. The advantages and limitations of the characterization techniques are discussed.     

基于微机的X射线分析自动测量系统

本文介绍了一个基于微机的X射线分析自动测量系统。该系统有三个基本功能:自动获取数据、自动换样和处理谱数据。     

EXL能谱仪薄样品X线的定量分析

研究了Link公司能谱仪中RTS软件（薄膜定量分析软件）可靠性及适用性。实验结果表明：RTS软件定量分析结果误差较小。但对C、N、O等轻元素定量分析，试样厚度小于1500以下时，结果才比较可靠。