Comparison of interfaces in Ti composites reinforced with uncoated and TiB2/C-coated SiC fibres

Interfaces play an important role in determining the mechanical properties of composite materials. The interfaces established between a titanium-alloy matrix (Ti-6Al-4V) and uncoated and TiB₂/C-coated SiC fibres are analysed by scanning electron microscopy, transmission electron microscopy and X-ray techniques. Emphasis is placed upon the interfacial morphology and microstructure, identification of reaction products, and the stability of the coating layer. Complex multi-reaction layers are observed frequently in the interfacial zones. Previous, often contradictory, reports about the interlayers are reviewed. Experimental observation demonstrates that the type and distribution of interlayers vary in a given system, due to prolonged treatment of the samples at temperature. The formation and distribution of the interlayers are discussed further, with respect to these and previous findings. Methods of reducing interfacial reactivity are discussed.     

低能X射线替代~（55）Fe测厚的研究

对比分析了X射线和55Fe对物体厚度测量的原理以及在实际应用中的优缺点,介绍了X射线测厚仪的结构构成,各部分实现原理和具体实现方案、措施,并针对X射线和55Fe的现场测厚进行对比实验。     

基于X射线的钢丝绳芯输送带监测系统设计

介绍了X射线探测原理,设计了一种基于X射线的钢丝绳芯输送带监测系统,详细阐述了该系统的硬件和软件设计。该系统可以实现输送带在线全速检测,能够提供输送带任意位置的X射线透射图像;通过对输送带的图像处理和对比,可对钢丝损伤、拉伸和修补区域进行定位,并可自动报警。     

Thermal expansion of molybdenum in the range 1500–2800 K by a transient interferometric technique

The linear thermal expansion of molybdenum has been measured in the temperature range 1500–2800 K by means of a transient (subsecond) interferometric technique. The molybdenum selected for these measurements was the Standard Reference Material SRM 781 (a high-temperature enthalpy and heat capacity standard). The results are expressed by the relation where T is in K and l ₀ is the specimen length at 20°C. The maximum error in the reported values of thermal expansion is estimated to be about 1% at 2000 K and not more than 2% at 2800 K.Paper presented at the Ninth Symposium on Thermophysical Properties, June 24–27, 1985, Boulder, Colorado, U.S.A.     

X-ray spectroscopy and local structures in glasses

X-ray spectroscopy which is a combination of two techniques, namely x-ray absorption near edge structure (xanes) and extended x-ray absorption fine structure (EXAFS) analyses, is a unique technique for the study of local structures in glasses. Availability of synchrotron radiation sources has made the technique quite attractive and useful because the photon flux from synchrotrons is very intense and polarized. In this article, a brief summary ofxanes andEXAFS techniques is given along with a few applications to the study of local structures in glasses. Communication No. 323 from Solid State and Structural Chemistry Unit.     

X射线机不是计量器具

计量学的基本理论指出，X射线机不具有计量器具的属性。国家的计量法规并未将X射线机定为计量器具。目前存在的JJG 40—2001《X射线探伤机》检定规程，将X射线探伤机与X射线检测技术相互混淆，将X射线探伤机的某些技术性能，说成所谓的X射线探伤机的“计量性能”，不仅违反计量学基本理论，而且也不符合射线检测技术实际。从计量学理论和射线检验实际经验只能得到X射线机不是计量器具的结论。     

Influence of Mn and Cu addition on the hyperfine parameters of amorphous and nanocrystalline FeCoNbB alloys

The effects of Cu and Mn addition on the hyperfine field of FeCoNbB HITPERM alloys are discussed from Mössbauer spectrometry. Amorphous and nanocrystalline samples at different stages of the nanocrystallization were studied. The effect of Cu addition correlates with the observed refinement of the microstructure. Mn mainly partitions to the matrix, decreasing the average hyperfine field of the amorphous matrix, although some Mn remains in the nanocrystalline grains, presumably, in a concentration below the maximum solubility of Mn in -Fe.     

Taxonomy for protective ability of rust layer using its composition formed on weathering steel bridge

For a quantitative evaluation of the protectiveness of a rust layer formed on a weathering steel bridge, the relationship between the corrosion rate of the bridge and the composition of the rust layers formed on the girders was first investigated. These corrosion rates were clearly classified by the protective ability index (PAI) of α/γ^∗ and (β + s)/γ^∗, where α, γ^∗, β and s are the mass ratio of crystalline α-FeOOH, the total of γ-FeOOH, β-FeOOH and the spinel-type iron oxide (mainly Fe₃O₄), β-FeOOH and spinel-type iron oxide, analyzed by XRD, respectively. The inequality of the former index α/γ^∗ > 1 expressed the protectiveness criterion of the rust layer, while that of the latter index, (β + s)/γ^∗< 0.5 or > 0.5, classified the corrosion rate of the non-protective rust layer. The PAI is useful for a quantitative evaluation of the protectiveness of a rust layer formed on a weathering steel bridge and is an important item for the corrosion assessment of the bridge.     

Structure, hyperfine interactions and magnetization studies of mechanically alloyed Fe50Ge50 and Fe62Ge38

X-ray diffraction, Mössbauer spectroscopy and magnetization measurements were used to study the structure and some magnetic properties of Fe₅₀Ge₅₀ and Fe₆₂Ge₃₈ prepared by mechanical alloying from the elemental powders. In both cases in the early stages of milling the intermediate paramagnetic FeGe₂ phase was formed. The mechanical alloying process of Fe₅₀Ge₅₀ resulted in the formation of the paramagnetic FeGe (B20) phase with an average crystallite size of about 15 nm. In the case of the Fe₆₂Ge₃₈, the ferromagnetic Fe₅Ge₃ (β) phase with a Curie temperature of about 430 K was obtained. The average crystallite size was about 9 nm. The average hyperfine magnetic field of about 16 T allowed it to determine that more than four germanium atoms exist in the nearest environment of the ⁵⁷Fe isotopes in the Fe₅Ge₃ phase.