几种航空有源电子干扰装备的比较

本文对远距离支援干扰飞机、随队支援干扰飞机、机载自卫电子对抗系统以及最近国外正在大力发展的分布式电子干扰系统等几种航空有源电子干扰装备的作战对象、战术应用、功能、使用局限性等特点进行了比较 ,探讨了综合发展和运用这几型装备的重要意义     

系列尼古丁PVC膜选择性电极的研制

以尼古丁为研究对象 ,研制了一系列含有不同增塑剂 (苯二甲酸二辛酯、苯二甲酸二壬酯和癸二酸二辛酯 )和电活性物质 (尼古丁 四苯硼缔合物、尼古丁 硅钨酸缔合物、尼古丁 磷钨酸缔合物和尼古丁 雷氏盐缔合物 )的PVC膜电极。所有的 8支电极均对尼古丁盐酸溶液有Nernst响应。所制备的电极中 ,以尼古丁 四苯硼缔合物、尼古丁 硅钨酸缔合物、尼古丁 磷钨酸缔合物或尼古丁 雷氏盐缔合物为活性物的电极 ,其线性范围达到 10 - 4～ 10 - 1 mol/L ,以尼古丁 硅钨酸缔合物为活性物的电极线性范围达到 10 - 5～ 10 - 1 mol/L。电极响应的均匀性还在进一步的研究和改善中     

PD雷达欺骗干扰方法浅析

概要介绍了PD雷达的抗干扰性能及其特点．并主要对PD雷达的欺骗干扰方法进行了一定的讨论。     

Influence of process variables on the drying of potato slices

Investigation of the effects of varying air velocity, slice thickness, and pre-treatment with sodium chloride solutions and surface active agents on drying potato slices indicated that the drying occurred entirely in the falling rate period and was controlled by the mechanism of liquid diffusion. The rate of drying, and therefore the diffusion coefficients, increased with the addition of sodium chloride and surface active agents. Diffusion coefficients were also influenced by air velocity and slice thickness, suggesting that the rate of drying of potato slices is controlled by a combination of internal and external resistances.     

一种基于自然数线性八叉树的优化构造算法

本文提出了一种基于自然数线性八叉树的优化构造算法。该算法以活动结点表为中间辅助结构，在图像输入过程中直接生成基于Ｎ码的八叉树叶结点．与常规构造算法相比，新提出的优化构造算法省去了Ｎ码的计算及合并过程，从而具有较高的时空效率．     

Monolithic SiGe Up‐/Down‐Conversion Mixers with Active Baluns

The purpose of this paper is to describe the implementation of monolithically matching circuits, interface circuits, and RF core circuits to the same substrate. We designed and fabricated on‐chip 1 to 6 GHz up‐conversion and 1 to 8 GHz down‐conversion mixers using a 0.8 µm SiGe hetero‐junction bipolar transistor (HBT) process technology. To fabricate a SiGe HBT, we used a reduced pressure chemical vapor deposition (RPCVD) system to grow a base epitaxial layer, and we adopted local oxidation of silicon (LOCOS) isolation to separate the device terminals. An up‐conversion mixer was implemented on‐chip using an intermediate frequency (IF) matching circuit, local oscillator (LO)/radio frequency (RF) wideband matching circuits, LO/IF input balun circuits, and an RF output balun circuit. The measured results of the fabricated up‐conversion mixer show a positive power conversion gain from 1 to 6 GHz and a bandwidth of about 4.5 GHz. Also, the down‐conversion mixer was implemented on‐chip using LO/RF wideband matching circuits, LO/RF input balun circuits, and an IF output balun circuit. The measured results of the fabricated down‐conversion mixer show a positive power conversion gain from 1 to 8 GHz and a bandwidth of about 4.5 GHz.     

在玻璃衬底上制作K~+离子交换掩埋波导的新工艺

本文报道用不同离子两步交换技术,在玻璃衬底上制作K~+离子交换掩埋波导的新工艺,它不要求施加外电场。用X射线能谱(XES)分析技术测试了K~+离子的浓度分布,证明所制出的样品是掩埋波导。     

浅谈天馈线电压驻波比对微波电路的影响

天馈线电压驻波比是微波电路运行的重要指标，通过典型事例来阐述天馈线电压驻波比的劣化对微波电路的影响，并根据多年实践经验提出天馈线维护需注意的事项。     

Efficient and accurate waveguide mode computation using BI‐RME and Lanczos methods

In this paper, a special purpose algorithm for solving large eigenvalue problems based on the Lanczos method is successfully applied to an engineering problem: the electromagnetic analysis and design of passive waveguide devices. For dealing with such complex problems, the boundary integral‐resonant mode expansion (BI‐RME) technique has been recently proposed. This technique solves integral equations (IEs) through the well‐known method of moments (MoM), thus leading to structured eigenvalue problems. These problems frequently become very large when solving complex arbitrary geometries with high accuracy. In such cases, the eigenvalue problem cannot be efficiently solved with standard methods by means of personal computers, essentially due to CPU time and memory allocation requirements. In this paper, we propose an alternative technique, based on the Lanczos method, for the fast and accurate solution of large BI‐RME generalized eigenvalue problems. The novel theoretical aspects of this approach, as well as the impacton the original BI‐RME formulation, are described. Comparative benchmarks are also successfully presented for the full‐wave analysis and design of real passive microwave devices. Copyright © 2005 John Wiley Sons, Ltd.     

砂岩储层渗透率表征方法探讨

渗透率是反映储层渗流能力的重要参数，目前对于单一储层的渗透率表征方法，通常是在岩心分析渗透率或测井解释渗透率的基础上进行厚度加权算术平均。这种方法对于均质的储层来说是适用的，但对于非均质严重的储层，不能准确反映该储层的实际渗流能力。本文提出一种应用可动流体体积权衡表征渗透率的方法，经实际资料验证，能较好地反映储层的实际渗透能力。