金属大气腐蚀实验技术进展

综述了金属大气腐蚀的实验方法和分析手段及各种方 法的优缺点，探讨了金属大气腐蚀研究的发展趋势.     

海洋工程用钢的大气腐蚀与耐候钢的发展

综述了海洋工程用钢的大气腐蚀行为与耐候钢发展方面的研究,特别是近十余年来国内外的相关成果。首先介绍了钢大气腐蚀的电化学模型,并从耐候钢特殊的锈层结构与合金元素作用两方面论述了耐候钢的锈层保护机制;然后分析了环境因素,包括相对湿度与污染物、光照、锈层损伤等,对耐候钢大气腐蚀行为的影响;最后总结了耐候钢的发展历程以及晶粒尺寸与显微组织等非合金因素在耐候钢发展中的作用,可为新型耐候钢的设计与应用提供指导。     

对甲醇精馏几个问题的认识

简述甲醇精馏三塔流程原理 ,分析了加压精馏塔及常压精馏塔物料和热量平衡关系 ,提出了操作中应注意的事项     

常压脱高硫浅议

就用常压塔脱高硫从流程设置、设备选择、工艺条件控制以及硫回收几方面进行讨论,并着重阐述了脱硫塔、再生槽的设计要求以及吸收、再生、熔硫的工艺条件。     

Effect of Pretreatment Atmosphere on CuO/TiO2 Activities in NO + CO Reaction

Using TiO₂ as carrier, CuO/TiO₂ catalysts with different CuO loading were prepared by the impregnation method. The catalytic activities in NO+CO reaction were examined with a micro-reactor gas chromatography reaction system and the methods of TPR, XPS and NO-TPD. It was found that the catalytic activities were affected by pretreatment atmosphere, i.e. H₂ atmosphere > reduction–reoxidation > 10%CO/He > reaction gas (fresh sample). NO decomposition was better by low-valence Cu species than by high-valence Cu species, i.e. Cu⁰>Cu⁺>Cu²⁺. The XPS results indicated that Cu species on CuO/TiO₂ were Cu⁰, Cu⁺, normal Cu²⁺(Cu²⁺(I)) and chain-structured Cu²⁺(Cu²⁺(II)) as –Cu–O–Ti–O–. The activities of Cu²⁺(II) were much higher than that of Cu²⁺(I), but both species were very unstable in the reaction atmosphere and easily reduced by CO, which accounted for the variable activities of fresh catalysts with increasing reaction temperature. In NO+CO reaction, the redox process was a cycle of Cu⁺–Cu²⁺(I) at low reaction temperature but was a cycle of Cu⁰–Cu⁺ at high reaction temperature. As shown by NO-TPD, high catalytic activities could be attributed to the following factors, e.g. oxygen caves on the catalyst’s surface after pretreatment with H₂ and reduction–reoxidation, formation of Cu⁰ after pretreatment with H₂, and increment of Cu species dispersion and formation of Cu²⁺(II) after pretreatment with reduction–reoxidation.     

硅压阻式气压高度计的设计与实现

采用硅压阻式压力传感器,以ATmega88PA为控制器设计了气压高度计。内嵌全温度范围的曲面拟合算法进行温度补偿及线性化处理,解决了压力传感器的温漂和非线性问题,并用海拔高度与气压的关系计算高度。测量结果通过RS-485接口发送给上位机。测试结果表明,该气压高度计压力测量误差优于0.50‰,分辨率为0.01 h Pa,线性度为0.999 9;标准大气环境下高度测量误差为0.16 m,线性度为0.999 8。该气压高度计具有质量小、功耗低、精度高、工作可靠等优点。     

常减压蒸馏装置配剂方法比较

对常减压装置的三种配剂方法进行分析比较，从而选出经济、合理的配剂方法。     

常减压蒸馏装置中和缓蚀剂的研制

针对炼油厂常减压塔塔顶冷凝系统现存的腐蚀问题,研制出以有机胺、咪唑啉衍生物为主要组分复配而成的新型中和缓蚀剂。通过模拟蒸馏实验表明:液相部位的缓蚀率达到99%以上,在初馏区露点部位的缓蚀率达到98%以上该中和缓蚀剂性能优良。     

二硝基芘异构体在模拟大气条件下的光化学反应

本文研究了二硝基芘异构体在模拟大气条件下的光化学反应，结果表明反应速率呈二级动力学关系，除光源变化的影响外，二硝基芘异构体在不同气氛中，反应速率不同，存在着氧的猝灭和氧化作用，而不同的异构体之间，相应的反应速度也不同。光解产物中存在硝基羟基类化合物、醌类和二聚体。毒理实验表明，光解产物致突变性下降。     

大型常压锥顶贮罐的设计

以工程实例为依据，论述国内以往较少采用的大型梁柱式支承锥顶贮罐的结构，介绍了国内外相关设计标准，给出了贮罐的典型结构－斜椽，横梁和立柱的计算公式，并用Excel电子表格编制了计算书。