双接触器型三相异步电动机Y-△降压启动电路

提出并试验了一种使用2个接触器的三相异步电动机Y-△降压启动电路,该Y-△降压启动电路比传统电路节省1个接触器。试验结果表明其可以应用于老设备维修改造和新设备设计中。     

Characteristics and classification of high-current fault arcs on distribution systems

When a fault occurs on transmission or distribution systems due to lightning or overvoltage, often an arc discharge occurs at the fault point. The arc discharge, which is caused by a fault current, has a high current, high temperature, strong light emission, etc., thus it sometimes causes heavy damages to electric power equipment. The arc discharge is influenced by the conditions around the arcs, i.e., gas, insulation materials, gap length, weather, etc. Also, the arc voltage along the arc column indicates the characteristics of the arc. If the voltage waveforms of the arcs caused by the fault on transmission or distribution systems are classified, it is possible to find the location and the equipment where the fault occurred. In this paper, the arc voltage data in 6-kV class XLPE cables and 6-kV class overhead lines are analyzed and an artificial neural network method is applied to classify the arc voltage waveforms. The results obtained from the six artificial neural networks developed show that the artificial neural network method is effective for classification of arc voltage waveforms if adequate input parameters are selected.     

红外焦平面探测器的输入电路性能分析

在混合式红外焦平面阵列中，探测器和读出电路之间的耦合是通过输入电路完成的。本文论述了输入电路在焦平面传输中的作用，分析了焦平面输入电路的性能，讨论了焦平面输入电路对红外焦平面阵列探测器设计的影响。     

厚度伸缩压电陶瓷振子

对厚度伸缩压电陶瓷振子的振动状态进行了分析,并得到其等效电路.推导了振子的谐振频率、反谐振频率以及等效电路参数与振子尺寸、振子材料的介电、压电、弹性常数间的关系式.最后讨论了振子的一些特性和制作.     

新型高性能脉冲峰值保持电路

本文介绍了两种新型跨导型脉冲峰值保持器，分别用于多丝正比室（ＭＷＰＣ）和复合晶体闪烁探测器（Ｐｈｏｓｗｉｃｈ）输出脉冲信号的形状和幅度分析。电路的跨导放大级采用跨导型集成运算放大器，使电路结构简单化，且性能优良可靠，能响应输入脉冲最小上升时间分别为５０ｎｓ（Ｐｈｏｓｗｉｃｈ）和５００ｎｓ（ＭＷＰＣ）的信号，在４０ｄＢ的动态范围内，两电路的积分非线性均好于０．１％，特别适用于空间γ射线观测。     

相变存储器存储单元瞬态电流测量

介绍了相变存储单元瞬态电流的测量方法。根据相变存储器的工作特性,利用微弱电流取样电阻测量法,合理选择测量参数测得了相变存储单元的瞬态电流,电阻与电流关系特性曲线和动态电阻。并根据测量电路等效电路模型分析影响测量的因素,估算出电路中的分布电容。     

一种基于类电磁机制算法的模拟电路故障诊断方法

针对模拟电路的特征,该文提出一种基于类电磁机制算法的模拟电路故障诊断方法,该方法首先利用小波包技术提取故障特征,然后将特征向量输入到采用类电磁机制算法优化的BP神经网络中,避免参数过早陷于局部最优,提高了神经网络的分类能力.通过具体实例验证了该算法的有效性.     

Localized relaxation theory of circuits and its applications in electro-thermal analyses

In the high-performance IC design with increasing design complexity,it is a very important design content to efficiently analyze IC parameters.Thus,the electro-thermal (ET) analyses including power/ground (P/G) analysis and thermal analysis are hot topics in today’s IC research.Since ET analysis equation has a sparse,positive definite and strictly diagonally dominant coefficient-matrix,we prove that the ET analysis has the advantage of locality.Owing to this advantage,localized relaxation method is formally proposed,which has the same accuracy as the global relaxation done with the constraint of the same truncation error limitation.Based on the localized relaxation theory,an efficient and practical localized successive over-relaxation algorithm (LSOR2) is introduced and applied to solve the following three ET analysis problems.(1) Single-node statistical voltage analysis for over-IR-drop nodes in P/G networks;(2) single-node statistical temperature analysis for hot spots in 3D thermal analysis;(3) fast single open-defect analysis for P/G networks.A large amount of experimental data demonstrates that compared with the global successive over-relaxation (SOR) algorithm,LSOR2 can speed up 1-2 orders of magnitudes with the same accuracy in ET analyses.     

虚拟红外成像器件的模拟输出电路设计

虚拟红外成像器件是能输出红外图像数据源的器件,在调试图像采集系统的硬件和软件时能替代非制冷红外焦平面阵列。虚拟成像器件的输出具有很好的线性度和精度,可作为图像采集电路的标定器件。文设计了虚拟红外成像器件的模拟输出电路,根据UL03401性能参数,设计了信号调理电路,通过在FPGA上使用ROM中查表方式校正模拟端口输出误差,在实际应用中表现了良好的精确性。     

基于模型修正技术的模拟集成电路几何规划优化方法

为了兼顾模拟集成电路设计优化的求解精度和计算效率,提出一种基于正项式模型修正技术的几何规划优化方法.首先将模拟集成电路的设计目标与约束简化为正项式模型,然后在采用几何规划方法迭代优化的过程中利用晶体管级SPICE仿真不断修正这一正项式模型.实例表明,与传统基于公式的优化方法和基于仿真的优化方法相比,该方法能够在尽量保证计算效率和全局最优解的前提下使优化精度满足晶体管级SPICE仿真的要求.