离子束增强沉积薄膜合成及其在材料表面优化中的应用

作者在多年实验工作的基础上，论述了离子束增强沉积薄膜合成及其在材料表面优化中的应用、所用设备、膜的合成、表面优化技术与机理，并展望了前景。     

微波电子回旋共振等离子体技术及其应用

微波电子回旋共振等离子体是淀积薄膜、微细加工和材料表面改性的一种重要手段。由于这种等离子体电离水平高,化学活性好,可以用来实现基片上薄膜的室温化学气相淀积和反应离子刻蚀,因此对于微电子学、光电子学和薄膜传感器件的发展,这种等离子体会具有重要的意义。此外,采用微波电子回旋共振等离子体原理,没有灯丝的离子源可以提高离子源的使用寿命,可以增加离子束的束流密度。可以确信,微波电子回旋共振等离子体的发展,将把离子源技术提高到一个新的水平。显然,这必将对材料表面改性工艺,包括离子注入掺杂等工艺的发展发挥作用。自从1985年以来,为了得到大容积等离子体而发展了微波电子回旋共振多磁极等离子体,这些技术在薄膜技术、微细加工以及材料表面改性中的应用前景是乐观的。我们将在本文中,介绍微波电子回旋共振等离子体的原理及其应用。     

基于DFT插值的宽带波束形成器设计

本文提出一种基于DFT插值的宽带波束形成器设计方法。首先推导了具有频率不变波束图的连续线阵的灵敏度函数与离散线列阵加权系数之间的关系；接着给出了基于DFT插值的宽带波束形成器设计的两个步骤：（1）使用窄带波束形成器的设计方法计算在参考频率下基阵的加权系数；（2）根据参考频率下基阵的权系数与其它子带权系数之间的关系，利用DFT插值的方法求出其它子带的加权系数。最后，给出了一个设计实例说明本文方法的有效性。     

钙铁硅铁磁体微晶玻璃热处理制度的研究

使用XRD、DTA、VSM等分析测试手段对在还原气氛下含少量B2O3、P2O5钙铁硅微晶玻璃的热处理制度进行了较深入的研究。研究发展，预核化处理对于钙铁硅微晶玻璃的晶化无明显作用。900℃作为钙铁硅微晶玻璃的晶化温度较适宜，晶化时间宜8h以上。     

Defects in molecular beam epitaxial GaAs grown at low temperatures

We have utilized a variable energy positron beam and infrared transmission spectroscopy to study defects in GaAs epilayers grown at low temperatures (LT-GaAs) by molecular beam epitaxy. We have measured the Doppler broadening of the positron-electron annihilation gamma ray spectra as a function of positron implantation energy. From these measurements, we have obtained results for the depth profiles of Ga monovacancies in unannealed LT-GaAs and Ga monovacancies and arsenic cluster related defects in annealed LT-GaAs. We have also studied the effects of the Si impurities in annealed LT-GaAs. The infrared transmission measurements on unannealed LT-GaAs furnish a broad defect band, related to As antisites, centered at 0.370 eV below the conduction band.     

Investigation of iodine as a donor in MBE grown Hg1−xCdxTe

N-type Hg_1−xCd_xTe layers with x values of 0.3 and 0.7 have been grown by molecular beam epitaxy using iodine in the form of CdI₂ as a dopant. Carrier concentrations up to 1.1 × 10¹⁸ cm⁻³ have been achieved for x = 0.7 and up to 7.6 × 10¹⁷ cm⁻³ for x=0.3. The best low temperature mobilities are 460 cm²/(Vs) and 1.2 × 10⁵ cm²/(Vs) for x=0.7 and x=0.3, respectively. Using CdI₂ as the dopant modulation doped HgTe quantum well structures have been grown. These structures display very pronounced Shubnikov-de Haas oscillations and quantum Hall plateaus. Electron densities in the 2D electron gas in the HgTe quantum well could be varied from 1.9 × 10¹¹ cm⁻² up to 1.4 × 10¹² cm⁻² by adjusting the thicknesses of the spacer and doped layer. Typical mobilities of the 2D electron gas are of the order of 5.0 × 10⁴ cm²/(Vs) with the highest value being 7.8 × 10⁴ cm²/(Vs).     

混凝土简支梁预设变形值探讨

以某高速公路钢筋混凝土与预应力混凝土工程为例，从简支梁的预拱度和下挠度的设置两方面进行了阐述，提出了钢筋混凝土简支梁下挠变形和预应力混凝土简支梁上拱变形的不同之处。     

New accurate two-noded shear-flexible curved beam elements

 There are two purposes of this work. One is to present two accurate two-noded finite elements which are derived from the potential energy principle and the Hellinger–Reissner functional principle respectively. The second is to show the successful application of the internal displacement parameters in developing a high-order related displacement-rotation interpolation field. Because the derived interpolation field is capable of accurately modeling deformation modes in extreme thin curved beams and nearly straight beams, both shear locking and membrane shocking are avoided. Several standard numerical tests display superior behaviors of the present elements. Received: 5 February 2002 / Accepted: 16 September 2002     

基于嵌入式计算机和Ethernet的分布式波控系统

介绍一种基于嵌入式计算机和以太网(Ethernet)的相控阵雷达分布式波控系统。整个波控系统以数个嵌入式计算机为核心，通过以太网与雷达的控制计算机通讯。