Monitoring of CdTe atomic layer epitaxy using in-situ spectroscopic ellipsometry

Atomic layer epitaxy or ALE has proven to be useful for the growth of epitaxial layers of high uniformity, good quality, and well-controlled thickness. In this study, we have carried out in-situ monitoring during the atmospheric pressure ALE of CdTe on GaAs (100) substrates using spectroscopic ellipsometry (SE). The susceptor temperature, reactant partial pressures, as well as the flow and flush duration for each precursor are crucial process variables for ALE growth. Growth was carried out for 20–25 cycles under different sets of these process conditions during the experiment and in-situ SE was used to verify the presence of layer-by-layer growth, which enabled the quick determination of the process window. We observed ALE growth of CdTe at 300°C, supporting the explanation that the growth of CdTe occurs via a surface catalyzed decomposition of the Te precursor di-isopropyltelluride (DIPTe). Investigation of ALE mode growth behavior for different susceptor temperatures and DIPTe flush times indicated that the growth was limited by competition between desorption and reaction of the adsorbed DIPTe species on the Cd terminated surface.     

格栅式水泥搅拌桩支护在西涌泵站的应用

简介水泥搅拌桩的支护机理,以西涌泵站为例介绍采用格栅式水泥搅拌桩作支护结构的设计及计算方法,指出该技术能较好地解决软湿粘性土地区枢纽深基础开挖问题.     

Kinetics of TSCD zinc oxide nano-layer growth by modified diffuse-interface model

Deposition of zinc oxide films from aqueous solutions containing complex Zn²⁺ ions on soda-lime substrates were studied by two-stage chemical deposition (TSCD) process. It was shown that the film thickness can be controlled by the number of dipping stages. Nano-layers were produced with less than nine times dipping stages. Greater dipping numbers resulted in film thickness exceeding 100 nm. The growth rate obeyed double-stage zeroth order with respect to the concentration and first order with respect to the temperature. This rate was proportional to the difference between the temperature of the hot water and the substrate. Overall activation energy of 17.20 ± 0.42 kJ mol⁻¹ and frequency factor of 2.81 ± 0.07 μm s⁻¹ was determined for ZnO deposition. These values were attributed to two resistances. One resistance corresponded with film heat transfer mechanism. The other was attributed to species attachment to the solid substrate. A modification to the diffuse-interface kinetic model was devised for explanation of the latter. EDAX (electron dispersive elemental analysis), XRD (X-ray diffraction) and SEM (scanning electron microscopy) were used to characterize the layer formed. These methods showed that the product consisted solely of pure elliptical ZnO grains.     

临盘油田分层注水管柱有效率影响因素分析

分层注水管柱有效率低一直是困扰临盘油田开发生产的一大难题。针对这一现状，在分析油藏结构、施工工艺和现场资料的基础上，分析了影响分层注水井管柱有效率的因素，阐述了封隔器、工艺操作、管枉自身及温度等制约分层注水管柱有效率提高的原因，并提出了相应的对策和措施。     

Germanium islands embedded in strained silicon quantum wells grown on patterned substrates

Germanium islands were embedded in strained silicon quantum wells in order to provide an improved electron confinement in vicinity of the islands. Growth was performed on relaxed SiGe layers. Patterned substrates were used, favouring lattice relaxation as well permitting the fabrication of small Ge islands at deposition temperatures above 500 °C. Photoluminescence analysis reveals a strongly reduced dislocation related signal. The low temperature spectra are dominated by intense signals from the germanium islands. The origin of these signals were investigated by removing the islands by etching, analysing reference samples without a silicon quantum well, varying the germanium deposition and the growth temperature.     

Efficient Reflectance and Visibility Approximations for Environment Map Rendering

We present a technique for approximating isotropic BRDFs and precomputed self-occlusion that enables accurate and efficient prefiltered environment map rendering. Our approach uses a nonlinear approximation of the BRDF as a weighted sum of isotropic Gaussian functions. Our representation requires a minimal amount of storage, can accurately represent BRDFs of arbitrary sharpness, and is above all, efficient to render. We precompute visibility due to self-occlusion and store a low-frequency approximation suitable for glossy reflections. We demonstrate our method by fitting our representation to measured BRDF data, yielding high visual quality at real-time frame rates.     

高速连续数据记录系统中双页缓存的设计和实现

在高速连续数据记录系统中，存储设备需要速度匹配单元来实现高速连续数据记录，文章讨论了双页缓存在高速连续记录系统中的作用，并以实际开发的记录系统为例，详细介绍了双页缓存的设计和实现。     

A Study of Surface Deformation during Wire‐Rod Rolling of High Speed Steels using Experimental and Computational Techniques

The evolution of surface defects during shape rolling of high‐speed steel billets is studied using longitudinal surface defects prepared by machining and welding. The reduction of the defects during rolling in a production mill is compared to the total area reduction of the billets. Samples are collected after pass 4, 6, 8, 14, 19 and the final pass, 28, representing the finished 5.5mm wire. By inspecting the cross sections, the rotation of the billets from pass to pass is evaluated. Results from FE simulations on solid billets are compared to the experimental results. Generally, simulations predict less reduction than observed experimentally. In most cases cracks reduce most effectively followed by carbon steel welds and stainless steel welds.     

Accurate Depth of Field Simulation in Real Time

We present a new post processing method of simulating depth of field based on accurate calculations of circles of confusion. Compared to previous work, our method derives actual scene depth information directly from the existing depth buffer, requires no specialized rendering passes, and allows easy integration into existing rendering applications. Our implementation uses an adaptive, two‐pass filter, producing a high quality depth of field effect that can be executed entirely on the GPU, taking advantage of the parallelism of modern graphics cards and permitting real time performance when applied to large numbers of pixels.     

Antiwear Action of Mineral Lubricants Modified by Conventional and Uncoventional Additives

The authors of this paper investigated the influence of esters of rapeseed oil fatty acids on the lubricating properties of mineral lubricants containing chosen AW/EP additives. Methyl esters, ethylene glycol esters, and glycerol esters as well as some commercial AW/EP packages based on zinc dialkyldithiophosphate, S–P organic compounds, and sulphurized esters of fatty acids were tested. The tribological tests were carried out with the use of a four-ball machine. Antiwear (AW) properties of tested compositions were determined using their limiting load of wear (G_oz(40)). It appears that the AW action of esters of rapeseed oil fatty acids depends on their structure. The best AW action is shown by compositions of mineral oil lubricants containing AW/EP additives and methyl esters of rapeseed oil fatty acids. The SEM/EDS analysis of the scar surface layer indicated that the presence of these esters in lubricants causes a change in the interaction between AW/EP additives and the metal surface. These observations were confirmed by the XPS surface analysis.