Note on the use of the term subject in pre-1886 discussions of thought-transference experiments.

In response to K. Danzinger's (see record 1986-00068-001) suggestion that the first use of the term subject in the English-language psychological literature occurred in 1886 in the context of experiments involving the hypnotic state, the present author points out that there are examples of the use of the term in discussions of experiments on thought transference published by the Society for Psychical Research in the 1880's. (8 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

多孔纤维型重整微反应器的等效电阻网络建模

针对应用于重整制氢微反应器的复杂多孔金属纤维载体（PFS）的流速场高效分析难题,建立载体中随机微通道的等效电阻网络分析模型. 基于复杂随机纤维结构的统计网络模型,将纤维载体中三维联通的随机微通道结构及与之相连的进出口腔简化为规则的网络通道结构.借鉴基尔霍夫定律,建立纤维载体的等效电阻网络模型,并确定求解方法. 纤维载体流速场实例分析的结果表明,基于等效电阻网络模型求解的纤维载体流速场与计算流体力学(CFD)方法的结果之间的皮尔森相关系数约为98%,且求解效率约为CFD方法的2.9×10⁴倍. 研究成果为多孔纤维型重整制氢微反应器的设计制造提供了新的支撑方案.     

高水头泄水建筑物侧墙掺气减蚀特性研究

工程中通常采用强迫掺气减蚀措施,防止泄水建筑物在高速水流作用下发生空蚀破坏,但在保护过流面底板的同时,忽视了对其侧墙的保护。为了减免位于高流速区域和低压区域侧墙发生空化空蚀,消除侧墙清水区,采用理论分析和物理模型试验研究方法,对龙抬头明流泄洪洞下游边墙掺气减蚀进行了研究,提出了在反弧末端加折流器（突扩）和突跌掺气方式。结果表明,采用突扩和突跌的掺气方式后,侧墙水流的出射角增大,侧空腔畅通,并直接和底空腔相连,有助于掺气坎后水舌的全断面的掺气,对侧墙和底板皆起到了很好的保护作用。     

液锻连挤硅线石粒子/铝复合材料的摩擦磨损行为

采用液锻连挤成形工艺获得了一种新型硅线石颗粒增强LY12铝基复合材料,其性能可与常规热挤压件媲美.摩擦磨损性能测试表明:硅线石颗粒增强铝基复合材料具有优良的摩擦磨损性能,且其耐磨性能随粒子体积分数增加而增加.材料经液锻连挤后,硅线石粒子在强大三向压应力作用下嵌镶于基体内,粒子很难拉脱,承受摩擦力的作用时,硅线石粒子起支承作用,粒子硬度高,故使复合材料整体耐磨性能提高.     

从煤炭、天然气制取石油石化产品工艺技术

在阐述煤炭、天然气通过吹氧气化制取CO +H2 合成气联产石油石化产品的基础上 ,详细介绍了甲醇、二甲醚、乙烯生产工艺技术的应用与开发 ,对各种工艺路线进行了论证和技术经济评估     

从假性紫罗兰酮合成β-紫罗兰酮中主要副产物(I)的分离鉴定

假性紫罗兰酮在浓硫酸及 - 2 0°C低温条件下反应 ,主要生成 β-紫罗兰酮 ,少量的 α-及 γ-紫罗兰酮 ,同时生成副产物 ( I)及 ( II)。用 IR、1H NMR及 MS光谱分析方法 ,对副产物 ( I)进行了结构鉴定 ,结构为 3,4,4a,5 ,8,8a-六氢 - 2 ,5 ,5 ,8a-四甲基 - 2 H - 1 -苯并吡喃     

Activation of a Au/TiO2 Catalyst by Loading a Large Amount of Fe–Oxide: Oxidation of CO Enhanced by H2 and H2O

Catalytic activity of a 1 wt% Au/TiO₂ catalyst is markedly improved by loading a large amount of FeO_x, on which the oxidation of CO in excess H₂ is selectively promoted at temperature lower than 60 °C. Oxidation of CO with O₂ on the FeO_x/Au/TiO₂ catalyst is markedly enhanced by H₂, and H₂O moisture also enhances the oxidation of CO but its effect is not so large as the promotion by H₂. We deduced that activation of Au/TiO₂ catalyst by loading FeO_x is not caused by the size effect of Au particles but a new reaction path via hydroxyl carbonyl intermediate is responsible for the superior activity of the FeO_x/Au/TiO₂ catalyst.     

用DCS顺控实现电除尘自动控制

介绍一种对电除尘工序进行远程自动控制的方法。使用DCS顺序控制图，通过模块组态和内部编程，实现多台设备的自动控制，优化工艺过程，提高该工序的自动化水平。     

实施电石法PVC生产过程中的循环经济

介绍了电石法聚氯乙烯生产过程中水、尾气和电石渣的循环利用及超低含量氯化汞触媒的使用情况。提出了要以“减量化、再利用、资源化”为原则,实现低消耗、低排放、高效率的循环经济。     

In situ visualization of drop deformation,erosion, and breakup in high viscosity ratio polymeric systems under high shearing stress conditions

In this paper, deformation and breakup under simple shear of single molten polymer drops in a polymer matrix were investigated. Flow visualization was carried out in a Couette‐Flow apparatus under relatively high shear rates and temperatures up to 230°C. Drop/Matrix combinations were composed of polystyrene drops of 0.5–0.6 mm in diameter in polyethylene matrix, and ethylene–propylene copolymer drops of approximately the same size in polypropylene matrix. The deformation and breakup processes were studied under steady state and time‐dependent shearing conditions. Either for steady state or time‐dependant shearing conditions, drop elasticity generated at relatively high shear rates helped the drops to align perpendicular to the flow direction, i.e., parallel to vorticity axis. Also, the most striking non‐Newtonian effects for the high viscosity ratio systems were the surface erosion and the drop splitting mechanisms. The particles eroded off the main droplet surface were very fine, in the range of 10–50 μm, and led to a significant reduction in main drop size before its final breakup. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2582–2591, 2006