A low-cost and low-temperature processable zinc oxide-polyethylenimine (ZnO:PEI) nano-composite as cathode buffer layer for organic and perovskite solar cells

Nanocomposite buffer layer based on metal oxide and polymer is merging as a novel buffer layer for organic solar cells, which combines the high charge carrier mobility of metal oxide and good film formation properties of polymer. In this work, a nanocomposite of zinc oxide and a commercialized available polyethylenimine (PEI) was developed and used as the cathode buffer layer (CBL) for the inverted organic solar cells and p-i-n heterojunction perovskite solar cells. The cooperation of PEI in nano ZnO offers a good film forming ability of the composite material, which is an advantage in device fabrication. In addition, power conversion efficiency (PCE) of the ZnO:PEI CBL based device was also improved when compared to that of ZnO-only and PEI-only devices. The highest PCE of P3HT:PC₆₁BM and PTB7-Th:PC₆₁BM devices reached to 3.57% and 8.16%, respectively. More importantly, there is no obvious device performance loss with the increase of the layer thickness of ZnO:PEI CBL to 60 nm in organic solar cells, which is in contrast to the PEI based devices, whose device performance decreases dramatically when the PEI layer thickness is higher than 6 nm. Such a nano composite material is also applicable in inverted heterojunction perovskite solar cells. A PCE of 11.76% was achieved for the perovskite solar cell with a thick ZnO:PEI CBL (150 nm) CBL, which is around 1.71% higher than that of the reference cell without CBL, or with ZnO CBL. In addition, stability of the organic and perovskite solar cells having ZnO:PEI CBL was also found to be improved in comparison with that of PEI based device.     

Conductivity of Nafion 117 membrane used in polymer electrolyte fuel cells

The membrane electric transport (MC) directly influences the performance of the polymer electrolyte fuel cells (PEMFC). The membrane conductivity is determined by a number of parameters such as: hydration technique, graphite cell geometry and pressure applied when the membrane electrode assembly (MEA) is joined. In addition, the membrane conductivity might be influenced by the electrode position due to the possibility of anisotropic electric conductivity.     

Electricity generation with a sediment microbial fuel cell equipped with an air-cathode system using photobacterium

The main purpose of this study is the characteristic and nature of current generation with a pure culture of single cell in a sediment microbial fuel cell. A sediment microbial fuel cell with an air-cathode system was studied for a prolonged period of time. The current maintained a steady increase throughout the entire time period and reached to its peak of 1.82 μA with power density of 29,024.65 μW/cm² at day 35. Water parameters such as salinity and pH were observed throughout the entire time period for better understanding. Operation of water parameter had been done after stabilization of current output for every measurement. The electron transfer pathway was assessed by cyclic voltammetry study. A low current density was observed due to profound internal resistance (141 Ω), and the reason for which was ohmic losses. A linear relationship was observed between current density and power density. Phylogenetic analysis was performed with 16S rRNA to identify the studied organism.     

Mass transfer and performance of membrane-less micro fuel cell: A review

Membrane-less micro fuel cells (MMFCs) are high potential alternative power sources compared to conventional batteries. They use the advantage of laminar flow without the presence of a membrane to separate the anode and the cathode. This article is a wide-ranging review of recent studies on mass transfer, performance, modelling advances and future opportunity in MMFCs research. The discussion focuses on the critical factors that limit the performance of MMFCs. Because MMFCs are diffusion-limited, most of this review focuses on design considerations to enhance the power density output. Moreover, the current status of computational modelling for MMFC systems to upgrade the cell performance will be presented. The review also identifies the challenges and opportunities available for increasing cell performance and making the MMFC a practical application device in the future.     

Optical and electronic property tailoring by MoS2-polymer hybrid solar cell

The ternary blend system such as binary donor and an acceptor or binary acceptor and a donor offers a way to improve the power conversion efficiency of the polymer solar cells (PSCs) by enhancing optical properties and electrical properties. In this work, PTB7, PC₇₁BM and Molybdenum disulfide nano-sheet (MoS₂NS) ternary blend system were investigated as an active material for OPV. The optimized ternary blend system showed increment of 17% power conversion efficiency (PCE) from 6.98% to 8.18%. The origin of improved PCE mainly arises from the significant increment in J_SC and marginal change in V_OC and FF. This improved PCE is due to increased light harvesting and improved charge carrier mobility in the active matrix. The marginal enhancement in V_OC and FF was correlated with the density of trap states (DOS) obtained from capacitance measurement of the device. The optical absorption and energy transfer mechanism of the ternary blend film is explained by absorption and photoluminescence measurement respectively. Further, the conversion efficiency due to improved charge carrier transport was described by modified SCLC mobility measurements for electron and hole only devices. The obtained result suggests that presence of MoS₂NS along with PTB7:PC₇₁BM binary system play dual role like an improved charge transport layer as well as light harvesting.     

Effect of SnO2 intermediate layer on performance of Ti/SnO2/MnO2 electrode during electrolytic-manganese process

SnO₂ intermediate layers were coated on the titanium (Ti) substrate by thermal decomposition. Scanning electron microscope (SEM) and X-ray diffraction (XRD) results show that uniform SnO₂ intermediate layers with rutile crystal structure were successfully achieved. According to the results of linear sweep voltammetry (LSV), oxygen evolution potential (OEP) of the Ti/SnO₂/MnO₂ electrodes decreases with increasing SnO₂ content, indicating that the electro-catalytic oxidation activity of the electrode increases. Accelerated service life tests results demonstrate that SnO₂ intermediate layer can improve the service life of the Ti/SnO₂/MnO₂ electrode. As the content of SnO₂ intermediate layer increases, the cell voltage and the energy consumption decrease apparently.     

Comparison of calculations for interplanar distances in a crystal lattice

The derivations for the general formulae of lattice interplanar distances are reviewed along with the methods using elementary geometry, intermediate Cartesian axes, and reciprocal lattice vectors. To highlight the characteristics of these three methods and the connections between them, examples for the simple cases such as orthorhombic, hexagonal, and rhombohedral systems are included. Calculations from reciprocal space are established from those from direct space with heavily involved mathematics for which details are seldom included in crystallography monographs. The only geometric method found in the literature for the interplanar distances in a crystal lattice is derived for a few specific simple cases with cos²α?+?cos²β?+?cos²γ?=?1, where α, β, and γ are the angles between the normal to the plane and the axes of a orthogonal system. However, the geometric method introduced in this work is a newly developed method and this method is complementary to other methods including the advanced contemporary reciprocal method. The connections between Cartesian and crystal coordinate systems, for angular relationships and the volume of unit cell are revealed. The interplanar spacing in non-primitive lattice and crystals are also discussed.     

Evaluation of decay photocurrent measurements in dye‐sensitized solar cells: Application to laser beam‐induced current technique

The use of the laser beam‐induced current (LBIC) technique in photovoltaic devices is widespread, but its use in photoelectrochemical cells, such as dye‐sensitized solar cells (DSSCs), is limited due to the configuration of these devices. The main reason is the very slow response time of DSSCs in the decay process, and therefore LBIC scans take too long to perform. We have designed a procedure published in the literature to correct the photocurrent values obtained by the LBIC technique, based on an algorithm that uses a decreasing mono‐exponential model. This work presents a study of the decay measurements in DSSCs using several functions, in order to improve the algorithm designed. It concludes that functions such as a decreasing bi‐exponential or Becquerel function generate better fits to experimental data. Copyright © 2010 John Wiley & Sons, Ltd.     

Modification of poly(ethylene oxide) electrolyte by Brönsted base terminated oligo(ethylene glycol) and its application in dye-sensitized solar cells

Oligo(ethylene glycol) terminated by pyridine derivatives was designed and synthesized for improving the performance of the dye-sensitized solar cells (DSCs) with poly(ethylene oxide) based electrolyte. Effects of the plasticizer on retarding the recombination reaction in DSCs were characterized by current density–voltage characteristics. Combined with the results on electron density measurements, photovoltage–intensity characteristics correlate the retarded electron recombination with the upward movement of the conduction band edge and the reduced order of recombination reaction. The increased electron lifetimes of the DSCs with plasticizer modified electrolyte were confirmed by a small perturbation voltage decay technique. Additionally, WAXS measurements show that the presence of the plasticizer decreases the crystallinity of PEO electrolyte, which facilitates the mass transport of the redox species as impedance spectra indicated. By introducing guanidinium thiocyanate into the plasticizer modified PEO electrolyte, the performance of the DSCs is further improved, which yields the highest efficiency of 3.5%.     

Probabilistic approach to multi-objective Volt/Var control of distribution system considering hybrid fuel cell and wind energy sources using Improved Shuffled Frog Leaping Algorithm

Deregulation and restructuring in power systems, the ever-increasing demand for electricity, and concerns about the environment are the major driving forces for using Renewable Energy Sources (RES). Recently, Wind Farms (WFs) and Fuel Cell Power Plants (FCPPs) have gained great interest by Distribution Companies (DisCos) as the most common RES. In fact, the connection of enormous RES to existing distribution networks has changed the operation of distribution systems. It also affects the Volt/Var control problem, which is one of the most important schemes in distribution networks. Due to the intermittent characteristics of WFs, distribution systems should be analyzed using probabilistic approaches rather than deterministic ones. Therefore, this paper presents a new algorithm for the multi-objective probabilistic Volt/Var control problem in distribution systems including RES. In this regard, a probabilistic load flow based on Point Estimate Method (PEM) is used to consider the effect of uncertainty in electrical power production of WFs as well as load demands. The objective functions, which are investigated here, are the total cost of power generated by WFs, FCPPs and the grid; the total electrical energy losses and the total emission produced by WFs, FCPPs and DisCos. Moreover, a new optimization algorithm based on Improved Shuffled Frog Leaping Algorithm (ISFLA) is proposed to determine the best operating point for the active and reactive power generated by WFs and FCPPs, reactive power values of capacitors, and transformers’ tap positions for the next day. Using the fuzzy optimization method and max-min operator, DisCos can find solutions for different objective functions, which are optimal from economical, operational and environmental perspectives. Finally, a practical 85-bus distribution test system is used to investigate the feasibility and effectiveness of the proposed method.