胶层厚度对双搭接胶连接接头承载力的影响分析

基于Hart-Smith对双搭接胶连接接头承载力计算公式的推导,分析了胶层最大剪应变(剪应力)和接头所承受荷载的对应计算关系;结合理论推导和试验详细分析了胶层厚度对此类接头承载力的影响,提出可以用"剥离临界值"判断剥离应力是否会导致接头破坏;以胶层最大剪应变(剪应力)与接头所承受荷载的对应计算关系为基础,结合"剥离临界值"完善了双搭接胶连接接头的承载力计算公式。     

银系无机抗菌剂的研究进展

本文综述了银系无机抗菌剂的抗菌机理，类型，制备工艺和应用现状及其抗菌性能评价的方法，探讨了银系无机抗菌剂的发展趋势。     

银型抗菌沸石的合成

沸石类抗菌材料是一种无机多功能材料，具有耐酸，耐碱，过滤除污，吸附除臭以及长效广泛的杀菌和抑菌效果，主要介绍液相，固相离子交换法将具有抗菌性能的银离子与沸石合成为抗菌沸石，用正交法确定两种方法的较佳条件，并进行比较，用红外光谱对沸石原样与抗菌沸石进行比较分析，同时对合成的抗菌沸石进行了抗菌性能测试。     

耐盐性高吸水树脂的研究进展

综述了近年来国内外提高吸水树脂耐盐性的研究进展，概述了高吸水树脂的结构和吸水机理，归纳了引入亲水单体、降低树脂颗粒微环境的盐浓度等提高吸水树脂耐盐性的方法。     

提高己内酰胺行业竞争力的分析与对策

对入世后我国己内酰胺行业面临的国际竞争环境和国内竞争环境进行了较详细地分析,提出了提高中国己内酰胺行业竞争力的措施和政策建议。     

One‐pot synthesis of silver‐modified sulfur‐tolerant anode for SOFCs with an expanded operation temperature window

To develop solid oxide fuel cells (SOFCs) capable of operating on sulfur‐containing practical fuels at intermediate temperatures, further improvement of the sulfur tolerance of a Ni + BaZr_0.4Ce_0.4Y_0.2O_3‐δ (BZCY) anode is attempted through the addition of some metal modifiers (Fe, Co, and Ag) by a one‐pot synthesis approach. The effects of these modifiers on the electrical conductivity, morphology, sulfur tolerance, and electrochemical activity of the anode are systematically studied. As a result, the cell with Ag‐modified Ni + BZCY anode demonstrates highest power output when operated on 1000 ppm H₂S‐H₂ fuel. Furthermore, the Ag‐modified anode displays much better stability than Ni + BZCY with 1000 ppm H₂S‐H₂ fuel at 600°C. These results suggest that the addition of Ag modifier into Ni + BZCY is a promising and efficient method for improving the sulfur tolerance of SOFCs. © 2017 American Institute of Chemical Engineers AIChE J, 63: 4287–4295, 2017     

《工业分析》理实一体化课程整体设计与实施

《工业分析》属专业核心课程,涉及的教学内容较多,实践性要求高.在教学中应充分利用现有教学和实验条件激发学生学习兴趣,培养学生创新能力.     

智能制造能力成熟度模型研究

主要介绍了智能制造发展现状以及国内外针对智能制造能力评价的相关研究,同时介绍了智能制造能力成熟度模型在相关行业应用研究情况.分析了我国智能制造能力成熟度模型的优缺点,并结合精益智能制造理论提出了一种三阶智能制造能力成熟度模型,便于从不同阶段、维度对企业进行等级评定.     

化学还原法制备Ag-TiO2光催化抗菌材料的研究

选用平均粒径分别为30nm和8μm的二氧化钛为原料,利用化学还原法制得银质量分数为0. 7% ~5%的Ag-TiO2光催化抗菌材料,采用抑菌圈试验对其抗菌性能进行研究,通过光催化降解亚甲基蓝实验研究了二氧化钛载银前后光催化活性的改变。结果表明,负载1% (质量分数)银的平均粒径为30nm的二氧化钛经250℃热处理后具有良好的抗菌性,其催化活性没有改变。     

High rate capability of LiFePO4 cathodes doped with a high amount of Ti

A Li-ion battery cathode with target stoichiometry LiTi_0.08Fe_0.92PO₄ was prepared by doping a high amount of Ti⁴⁺ into the olivine structure using solid-state reaction at 700 °C. Synchrotron X-ray diffraction studies confirmed the presence of a major olivine phase and NASICON-type ion-conducting Li₃Fe₂(PO)₄ and Li₂TiFe(PO₄)₃ impurities. Further, the calculated lattice parameter values appear to confirm Ti-doping in LiFePO₄. Electron microscopy and particle distribution studies not only revealed a slightly increased average particle-size and particle fragmentation but also confirmed a fair distribution of Ti⁴⁺ ions in the prepared sample. The LiTi_0.08Fe_0.92PO₄ cathode delivered high specific capacities and good capacity retentions (≤2% capacity loss after 50 cycles) for lithium battery applications. Besides, the cathode delivered impressive rate capabilities as specific capacities of 160 and 110 mA h g⁻¹ at 0.2 and 11.4 C, respectively, were retained. Although the average particle-size was slightly higher, the presence of ion-conducting NASICON-type species appear to contribute to the enhanced electrical conductivity and hence to the cathode performance of LiTi_0.08Fe_0.92PO₄.