碳黑对苯乙烯自由基聚合反应影响的研究

研究了碳黑对苯乙烯单体聚合物反应的影响，结果表明，用过氧化苯甲酰作引发剂，普通碳黑子对苯乙烯的聚合有强烈的阻聚作用，而用偶氮二异丁腈引发聚合物时，普通碳黑的阻聚性很小，当时碳黑进行接枝处理后，接枝碳黑对苯乙烯自由基聚合的影响程度与接枝方法有关，其中过氧化苯甲酰 自由基枝枝碳黑的聚性变化较大。     

采用纯化学物质校准仪器测定钛合金中碳量

采用纯化学物质对高频加热－红外检测碳硫仪校准，对钛合金中的碳量进行测定。     

离子注入中污染的产生及防护

本文概述了离子注入过程中污染产生的原因和防止污染的措施，特别强调了对微粒污染和金属污染的防护以满足ＵＬＳＩ加工对离子注入的要求。     

GaN and AlGaN high-voltage rectifiers grown by metal-organic chemical-vapor deposition

In this paper, we report the study of the electrical characteristics of GaN and AlGaN vertical p-i-n junctions and Schottky rectifiers grown on both sapphire and SiC substrates by metal-organic chemical-vapor deposition. For GaN p-i-n rectifiers grown on SiC with a relatively thin “i” region of 2 μm, a breakdown voltage over 400 V, and forward voltage as low as 4.5 V at 100 A/cm² are exhibited for a 60-μm-diameter device. A GaN Schottky diode with a 2-μm-thick undoped layer exhibits a blocking voltage in excess of ∼230 V at a reverse-leakage current density below 1 mA/cm², and a forward-voltage drop of 3.5 V at a current density of 100 A/cm². It has been found that with the same device structure and process approach, the leakage current of a device grown on a SiC substrate is much lower than a device grown on a sapphire substrate. The use of Mg ion implantation for p-guard rings as planar-edge terminations in mesageometry GaN Schottky rectifiers has also been studied.     

碳纳米管(CNT)场发射显示器的关键技术的研究

对碳纳米管阴极的制备以及场发射显示器的真空封装技术进行了研究.利用一种新的碳纳米管生长工艺制备出了具有优良场发射性能的碳纳米管阴极.并将这种直接生长的碳纳米管薄膜作为阴极,结合一种弹性封装工艺,开发了一种具有简单字符显示功能的场发射显示器.该显示器在较低的工作电压下就可获得高亮度的显示效果,并且器件的亮度与驱动电压成较好的线性关系,这将有利于未来的碳纳米管场发射显示器实现高亮度和多级灰度显示.器件的持续工作寿命测试已经超过5500小时,充分验证了碳纳米管作为场发射阴极的应用潜力.     

有机化合物中碳原子化学环境的分类

进行碳－１３ＮＭＲ波谱模拟的一种常用方法为线性回归，其数学模型则由已知结构所测得的化学位来建立。显然，每一数学模型仅可用于某种相似的化学环境。因此，为了进行化学环境的分类，本文提出权重层次位图法和分子连接性指数法两种方法以进行一些参数的计算，同时采用多元分析手段，如主成分分析和聚类分析，以进行多维空间数据点的显示，所得结果比较满意，从而可为碳－１３波谱模拟中回归方程的选择提供理论依据。     

XCOY-1型三电极一氧化碳检测报警仪的研制

文中介绍一种一氧化碳检测报警器，利用恒电位电解法原理制成的传感器，并配以最新电子元器件组成检测仪。用于对矿井、化工、煤炭、电力、冶金、环保等有关部门的一氧化碳检测。     

光纤0_2/CO_2复合传感器的研制

本文报导一种新型的光纤氧、二氧化碳复合传感器.通过在同一敏感膜载体上固定两种不同的荧光试剂——芘丁酸及羟基芘三磺酸,制作了一种对氧和二氧化碳敏感的复合敏感膜.该传感器在医学临床检验范围内具有良好的线性,其测氧的分辩率是0.1％,测二氧化碳的分辩率是0.5％,响应时间短于1min.文中还讨论了三种敏感膜载体的比较及复合传感器测量进程中氧和二氧化碳的相互干扰问题.     

CF/ABS树脂复合材料制备工艺对导电性能的影响及对屏蔽性能的理论预测

本文研究了使用溶剂法、密炼机和开炼机混炼碳纤维填充ABS树脂复合材料的导电性能,得到了纤维填充量与复合材料电阻率的关系,对其导电机理进行了分析.通过比较,发现纤维长径比是决定复合材料导电性能的重要因素,其它如纤维在基体中的分布也对复合材料导电性能有影响.最后对复合材料的屏蔽性能进行了理论计算.     

Nitric oxide reduction and carbon monoxide oxidation over carbon-supported copper-chromium catalysts

Carbon supported copper-chromium catalysts are shown to be very active for both the reduction of nitric oxide with carbon monoxide and the oxidation of carbon monoxide with oxygen. Mixed copper-chromium oxide active phases have good activity in the simultaneous removal of nitric oxide and carbon monoxide from exhaust gases. The influence of several catalyst variables has been investigated. The activity per volume of catalyst increases with increasing loading, while the intrinsic activity shows a maximum around C/M=100−50. An optimum catalyst for nitric oxide reduction and carbon monoxide oxidation has a copper/chromium ratio of 2/1. The apparent activation energy for the carbon monoxide oxidation over carbon supported copper-chromium catalysts is 77 kJ/mol, suggesting that the Cu---O bond rupture is the rate-limiting process. The reduction of nitric oxide takes place at higher temperatures. Since all catalysts have a low selectivity for molecular nitrogen formation at lower temperatures, the dissociation of nitric oxide is probably rate determining, resulting in a slightly reduced catalyst system. In an excess of carbon monoxide the reaction is first-order in nitric oxide and zero-order in carbon monoxide. Moisture inhibits the reaction by reversible competitive adsorption, whereas carbon dioxide does not. Oxygen completely inhibits the reduction of nitric oxide due to the more rapid reoxidation of the catalytic sites compared to nitric oxide. Therefore, the reduction of nitric oxide takes place only when all oxygen has been converted and, hence, is shifted to higher temperatures. As a possible consequence, the production of nitrous oxide is reduced. Nitric oxide and molecular oxygen react preferentially with carbon monoxide, so, in an excess of oxidizing component, gasification of the carbon support occurs at higher temperatures after carbon monoxide has been completely consumed.