Flow stress of high density polyethylene and nylon 66 at high rates of strain

Measurement of the flow stress of high density polyethylene (HDPE) and nylon 66 at strain rates of 10³ s^?1 using a split Hopkinson pressure bar technique is discussed. The flow stress at a strain of 10% has been determined for both polymers at 20°C. The intrinsic errors involved in this technique are briefly reviewed. The results indicate that the flow stress of HDPE and nylon 66 were 50MPa and 150MPa, respectively, at strain rates of about 10³s^?1.     

ER流体特性及其研究现状

本文简要介绍了ER流体现象及其力学和电学性能,给出了描述ER流体行为的一般理论,提出了ER流体应用中目前存在的主要问题。     

Structure evolution of conductive polymer composites revealed by solvent vapor induced time-dependent percolation

The authors of this paper synthesized a series of amphiphilic triblock copolymers of polystyrene-b-poly(ethylene glycol)-b-polystyrene (PS-PEG-PS) having different PEG/PS ratios with nearly identical molecular weights of the entire copolymers. The interfacial interactions in the composites consisting of carbon black and the copolymers can thus be tailored. When these conducting composites are exposed to certain solvent vapors, their electrical resistances greatly increase, showing the gas sensitivity. The present work indicated that this switching behavior is controlled by the structural relaxation of the composites because matrix swelling acts as the main mechanism. The response time has been correlated with absolute temperature by Arrhenius equation, and the estimated activation energy reflects mobility of the fillers involved in the solvent induced expansion of the surrounding polymer. Therefore, by using the gas sensibility of the conductive composites, the structure evolution of the composite materials in solid state and the effect of filler/matrix interfacial interaction on the relaxation property of the matrix polymer has been inspected. It was found that lower activation energy represents stronger interfacial interaction in case good solvent of the matrix was used for the test.     

New approaches for error estimation and adaptivity for 2D potential boundary element methods

This work presents two new error estimation approaches for the BEM applied to 2D potential problems. The first approach involves a local error estimator based on a gradient recovery procedure in which the error function is generated from differences between smoothed and non‐smoothed rates of change of boundary variables in the local tangential direction. The second approach involves the external problem formulation and gives both local and global measures of error, depending on a choice of the external evaluation point. These approaches are post‐processing procedures. Both estimators show consistency with mesh refinement and give similar qualitative results. The error estimator using the gradient recovery approach is more general, as this formulation does not rely on an ‘optimal’ choice of an external parameter. This work presents also the use of a local error estimator in an adaptive mesh refinement procedure. This r‐refinement approach is based on the minimization of the standard deviation of the local error estimate. A non‐linear programming procedure using a feasible‐point method is employed using Lagrange multipliers and a set of active constraints. The optimization procedure produces finer meshes close to a singularity and results that are consistent with the problem physics. Copyright © 2002 John Wiley & Sons, Ltd.     

基于EWB的D/A数模转换器的仿真研究

阐述了D／A转换器的仿真原理，给出了T形电阻网络D／A转换器仿真模型的构造方法，并采用EWB进行了系统仿真，仿真结果表明该方法是合理、可行的。     

基于XML技术数据库优化接入设计

鉴于用户对目前数据库接入技术要求的提高，一种基于XML技术对数据库接入进行优化的技术出现了。这种技术利用了基于XML传输时的可扩展、高度结构化等特性，在JavaBean，JDBC，Apache，Tomcat等设计组件及Linux体系结构的配合使用下．为用户提供了一个安全、高效、可扩展且访问灵活的数据库接入方式。     

迭加与量化水印嵌入方案的比较及量化参数优化

分别研究了迭加法和量化法的隐蔽性和稳健性，并且提出了量化调制水印方案中的参数优化方法。对两类方法的分析比较表明，迭加法适用于在高频分量嵌入水印，而量化法适用于在低频分量嵌入水印。并以实验验证了这一结论。     

采用氮气氛保护的再流焊接技术

叙述了先进再流焊接技术的新发展,描述了提高BGA再流焊接效果的工艺要点,优化倒装芯片再流焊接和固化的新方法。最后,讲述了先进的降低氮消耗量的方法即:通过最大限度地提高潜在收益,以促进再流焊接技术的发展,以此来满足装配厂商的需要。