Chemical Processing of Nanostructured Cemented Carbide

Chemical processing is becoming a vital component in the economic development of advanced engineering materials. Our research group on chemical processing has been focussed on the development of process to produce nanophase cemented carbide. It is a much more direct route for making WC/Co than traditional processing methods, and offers the potential for lower cost production of novel materials with homogeneous nanophase microstructures and improved properties. This paper addresses the scientific and technical issues relating to the chemical processing of nanophase WC/Co composite powder and their sintering.     

ZnCl2-assisted Synthesis of ZnSe Polycrystal

A chemical-assisted element direct-reaction method is developed to synthesize ZnSe compound semiconductor material at a relatively low temperature (～1000 C). ZnSe polycrystal was obtained in the closed-tube systems with Zn-Se, Zn-Se-Zn(NH3)2Cl2, Zn-Se-NH4Cl and Zn-Se-ZnCl2. The as-synthesized samples were tested by X-ray diffraction (XRD), thermogravimetric analysis (TGA) and analyzed by thermodynamic numerical method. The results demonstrate that the synthesis efficiency is higher than 99.96% for Zn-Se-ZnCl2 system at around 1000 C for 3 weeks. It also exhibits that not only temperature, but also low apparent ratio of volume and surface area of the source materials and higher ZnCl2 content are required to achieve high synthesis efficiency. A SeCl transporting reaction synthesis process is proposed based on the thermodynamic analysis.     

Growth of calcium carbonate by the atomic layer chemical vapour deposition technique

Thin films of CaCO₃ (calcite) have been grown with the atomic layer chemical vapour deposition (ALCVD) technique, using Ca(thd)₂ (Hthd=2,2,6,6-tetramethylheptan-3,5-dione), CO₂, and ozone as precursors. Pulse parameters for the ALCVD-type growth are found and self-limiting reaction conditions are established between 200 and 400 °C. Calcium carbonate films have been deposited on soda-lime glass, Si(100), -Al₂O₃(001), -Al₂O₃(012), -SiO₂(001), and MgO(100) substrates. The observed textures were: in-plane oriented films with [100](001)CaCO₃ [100](001)Al₂O₃ and [100](001)CaCO₃[110](001)Al₂O₃ on -Al₂O₃(001), amorphous films on -Al₂O₃(012) when grown at 250 °C, and columnar oriented films on soda-lime glass, Si(001), -SiO₂(001), and MgO(100) substrates with (00l) and (104) parallel to the substrate plane at 250 and 350 °C, respectively. The film topography was studied by atomic force microscopy and AC impedance characteristics were measured on as-deposited films at room temperature. The films were found to be insulating with a dielectric constant (_r) typically approximately 8. Thin films of CaO were obtained by heat treatment of the carbonate films at 670 °C in a CO₂-free atmosphere, but the thermal decomposition led to a significant increase in surface roughness.     

Polycrystalline silicon films on glass grown by amorphous-liquid-crystalline transition at temperatures below 330 °C

An approach to deposit polycrystalline silicon layers on amorphous substrates is presented. It is shown that metastable amorphous silicon can be transformed into its more stable microcrystalline structure at a temperature below 330 °C via an intermediate liquid solution stage. In particular, the interaction of liquid indium nanodroplets in contact with amorphous silicon is shown to lead to the formation of circular polycrystalline domains. Crystallinity of these domains is analyzed by micro-Raman spectroscopy. The droplet size necessary for the onset of crystallization is related to the temperature of the film. Full coverage of the substrate with microcrystalline silicon has been obtained at 320 °C within less than one hour. These films might act as seeding layers for further enlargement by steady-state liquid phase epitaxy.     

Microstructure characterization of CVI-densified carbon/carbon composites with various fiber distributions

Mechanical behavior of multi-phase composites is crucially influenced by volume fractions, orientation distributions and geometries of microconstituents. In the case of carbon–carbon composites manufactured by chemical vapor infiltration, the microconstituents are carbon fibers, pyrolytic carbon matrix, and pores. The local variable thickness of the pyrolytic carbon coating, distribution of the fibers and porosity are the main factors influencing the properties of these materials. Two types of fiber arrangements are considered in this paper: 2D laminated preform and random felt. The materials are characterized by determining their densities and their fiber distribution functions, by establishing types of pyrolytic carbon matrix present in the composites, and by studying the porosity. A technique utilizing X-ray computed tomography for estimation of the orientation distribution of the fibers and pores with arbitrary shapes is developed. A methodology based on the processing of microstructure images with subsequent numerical simulation of the coating growth around the fibers is proposed for estimation of the local thickness of the coating. The obtained information is appropriate for micromechanical modeling and prediction of the overall thermo-mechanical properties of the studied composites.     

表面化学改性活性炭在水处理中的应用

介绍表面化学改性活性炭研究进展,针对其特点和改性方法作了系统描述.在此基础上,对其去除水中有机物、重金属离子、亚硝酸盐等污染物质做了简要说明.     

金纳米微粒修饰几丁聚糖微胶囊新方法

制备了金-海藻酸钙-几丁聚糖微胶囊,提出了修饰用于蛋白质药物靶向传输的多糖载体-几丁聚糖的新方法,该方法通过在几丁聚糖微胶囊表面结合金的纳米微粒使微胶囊表面结构发生变化,从而改变微胶囊的性质,这种修饰方法目前未见报道.文中对制备条件进行了优化,并对金-海藻酸钙-几丁聚糖微胶囊的粒径分布进行了表征.文中选择在pH值为5时反应2 h,制得的柠檬酸体系和丙烯酸体系的金-海藻酸钙.几丁聚糖微胶囊的平均直径分别为216.686um和196.850um.     

Inference and uncertainty quantification of stochastic gene expression via synthetic models

Estimating uncertainty in model predictions is a central task in quantitative biology. Biological models at the single-cell level are intrinsically stochastic and nonlinear, creating formidable challenges for their statistical estimation which inevitably has to rely on approximations that trade accuracy for tractability. Despite intensive interest, a sweet spot in this trade-off has not been found yet. We propose a flexible procedure for uncertainty quantification in a wide class of reaction networks describing stochastic gene expression including those with feedback. The method is based on creating a tractable coarse-graining of the model that is learned from simulations, a synthetic model, to approximate the likelihood function. We demonstrate that synthetic models can substantially outperform state-of-the-art approaches on a number of non-trivial systems and datasets, yielding an accurate and computationally viable solution to uncertainty quantification in stochastic models of gene expression.     

A Recursive Orthogonal Least Squares Algorithm for Training RBF Networks

A recursive orthogonal least squares (ROLS) algorithm for multi-input, multi-output systems is developed in this paper and is applied to updating the weighting matrix of a radial basis function network. An illustrative example is given, to demonstrate the effectiveness of the algorithm for eliminating the effects of ill-conditioning in the training data, in an application of neural modelling of a multi-variable chemical process. Comparisons with results from using standard least squares algorithms, in batch and recursive form, show that the ROLS algorithm can significantly improve the neural modelling accuracy. The ROLS algorithm can also be applied to a large data set with much lower requirements on computer memory than the batch OLS algorithm.     

技术变革带来污水汽提装置能耗显着下降

本文论述的污水汽提装置采取了一系列改进措施。不仅处理后水质大为改观，而且蒸汽、电和水的消耗显著下降，尤其是蒸汽单耗达到了６０ｋｇ／ｔ污水，在石化总公司居领先水平。