Chromatic induction: Opponent color or complementary color process?

In present convention, chromatic induction (simultaneous and successive contrast) is usually held to be an opponent color process. Fifty years ago, it was an accepted complementary color process. The latter was never disputed yet apparently overlooked, and is here shown to be the more accurate account by inspecting afterimages and published data on simultaneous and successive hue induction. © 2007 Wiley Periodicals, Inc. Col Res Appl, 33, 77–81, 2008     

Uncertainty analysis for the NIST 0:45 Reflectometer

Sets of color tiles are available from the National Institute of Standards and Technology calibrated using the NIST 0:45 Reflectometer. The uncertainties associated with the measured values for the color tiles are an indispensable component of the calibration report that accompanies these tiles. A systematic, analytical approach developed previously was applied to the particular case of the reference instrument and color tile set, taking into account the operation and characteristics of the instrument and the spectral properties of the set. The primary sources of uncertainty were identified, and the resulting uncertainties in the color space values L*, a*, and b* were determined. In general, the uncertainties are lowest for those color tiles whose reflectance factors are nearly constant with wavelength. Published in 2008 by John Wiley & Sons, Inc. Col Res Appl, 33, 100–107, 2008     

Detection and modification of confusing color combinations for red‐green dichromats to achieve a color universal design

Color‐vision deficiency is a relatively common genetic condition, which often leads to the obstruction of necessary information in colored images. It is important to minimize such inconvenient effects in communication using colored images from a universal design perspective. The universal design principle stipulates that all environments and products should be usable by all people, regardless of age, physical attributes, and ability. This article proposes a method to detect color combinations in a given image that would confuse color dichromats, and suggests a way in which to modify them to make the image easily distinguishable for both normal and dichromatic observers. Confusing color combinations were detected based on a color‐difference calculation using simulations of how the color would appear to dichromats. The confusing colors were then modified based on the minimization of an evaluation function, which was defined as the sum of the degree of confusion and the degree of color change from the original image. Several colored images obtained by the proposed method were compared with the originals by red–green dichromatic observers who judged them to be clearer, thereby confirming that the proposed method was effective for color rendering for universal design. © 2008 Wiley Periodicals, Inc. Col Res Appl, 33, 203–211, 2008     

Perceptual evaluation of color gamut mapping algorithms

The recommendation of the CIE has been followed as closely as possible to evaluate the accuracy of five color gamut mapping algorithms (GMAs)—two nonspatial and three spatial algorithms—by psychophysical experiments with 20 test images, 20 observers, one test done on paper and a second one on display. Even though the results do not show any overall “winner,” one GMA is definitely perceived as not accurate. The importance of a high number of test images to obtain robust evaluation is underlined by the high variability of the results depending on the test images. Significant correlations between the percentage of out‐of‐gamut pixels, the number of distinguishable pairs of GMAs, and the perceived difficulty to distinguish them have been found. The type of observers is also important. The experts, who prefer a spatial GMA, show a stronger consensus and look especially for a good rendering of details, whereas the nonexperts hardly make a difference between the GMAs. © 2008 Wiley Periodicals, Inc. Col Res Appl, 33, 470–476, 2008     

Physicochemical and Sensory Evaluation of 'Rocha' Pear Following Controlled Atmosphere Storage

ABSTRACT: The effects of several processing factors (storage time, time in the open air at room temperature, and overhead concentrations of O₂ and CO₂) on color, firmness, polyphenol oxidase (PPO) activity, and sensory attributes of pears (cv. Rocha) grown in 2 locations were studied using a multiple linear regression model. Backward elimination (F ≥ 0.005) was used to assess the significant factors. Extended storage time, long‐time exposure at room temperature, and high O₂ concentration played major roles on color changes assessed instrumentally and further confirmed by a sensory panel. Firmness was strongly affected by storage time and by time in the open air at room temperature. Finally, PPO activity was dependent on the growing location.     

BC—1型白平衡仪的原理与实践

ＢＣ－１型白平衡仪是一种光电积分式测色仪器，它通过颜色传感器获取屏幕的红，绿，蓝三条色信号，与预先存储在仪器中的标准信号值相比较通过ＬＥＤ条形显示器显示两者之偏差，用以直接指导彩电生产线的白平衡调整，仪器采用Ｉｎｔｅｌ１８０９８单片微机为系统核心，内藏信号发生器，仪器可任选红，绿，蓝作为基准色，具有基色亮度自动调整功能，该仪器的定标方法简单，快捷，可方便地存储８套基准白场标准数据，该仪器已可靠在应     

光源与物体色显现关系的仿真技术探讨

本文提出一种“利用原色漂移量调整法”确定当物体光谱反射率未知时光源与物体色显色关系。 利用该关系，通过微机真彩色数字图象技术对光环境进行仿真模拟。     

A comparative study of color measurement lntstrumentation

A multiplant Quality Improvement Team [QIT] was firmed to develop and implement an evaluation program for various color measurement .systems as potential replacements for the then-current aging systems. The emphasis qf this article is the analytical methodology utilized to evaluate the various color systems. The evaluation program consisted cf two phases. Phase I was a general overview/review of several systems, while Phase II was an extensive internal comparative evaluation measurement systems. These were Milton-Roy's ColorMate HDS, HunterLab's Ultrascan, Datacolor's CS-5, and BYK-Gardner's The Color Sphere [TCS]. The main comparison criteria were interinstrument agreement [agreement between two instruments ofthe same system], user-friendly software and computer interface capability, vendor amenability to a long-term logistical and maintenance relationship, and price. All systems were evaluated by duplicate measurements on various color tiles, yarns, and polymer flakes-over 1600 measurements on each system. The systems were compared with an instrument matrix, a decision matrix, and a product matrix. The instrument matrix was a comparison qfinstrument parameters, software/math treatments, and economics. The decision matrix was a forced ranking of each system by each criteria category [1–4 scale, with 1 representing the best and 4 representing the worst]. The product matrix accentuated the relative importance ofone criterion category over another by multiplying the forced ranking by the criticality of the category. The criticality of a given category wus determined by consensus within the QIT. Thr combination qf the three matrices allowed the evaluator[.s] t o select the color rneasuremmt system that best satixfied the color measurement needs and requirements of their facility and their products. For this evaluation, all ofthe evaluated systems were superior to the then-current agingsystems. As a result of this methodology, one instrument emerged as clearly superior. © 1994 John Wrley & Sons, Inc.     

Light and color,some ethical issues

This is a comment to the editorial by J. Hutchings on “Talking about Color… and Ethics.” © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 233–235, 2007