单齿圈牙轮钻头轮体速比的计算机仿真

为进行整个牙轮钻头轮体速比的仿真研究，先研究了单齿圈牙轮钻头轮体速比仿真。借助钻头几何学、运动学和已建立的岩石与牙齿互作用力学模型，在一定假设的基础上建立了牙齿运动和受力、牙轮扭矩、牙轮角速度和角加速度等的仿真模型。用计算机程序模拟单齿圈牙轮钻头在给定岩石中的钻进过程，得到了单齿圈牙轮转速与钻头体转速的比值（轮体速比）的变化规律。接着用软件试验探索岩石、钻压、移轴距对单齿圈牙轮钻头轮体速比的影响。仿真软件试验结果与台架实物试验结果的比较证明，这种仿真方法是可行的。     

二次混合机改造

南钢烧结厂二次混合机通过降低筒体的仰角、提升筒体的转速,增加了混合料的混匀时间,提高了混合料的造球效率,介绍了设计中各种部件的选型和校核计算,该设备投产后大幅度提高了生产能力。     

利用表面等离子体波共振效应(SPRE)对角度与共振波长关系的研究

本文利用了Kretchmann模型的表面等离子体波共振效应，研究了共振波长对入射角变化的敏感性，从而为研制一种新的角度传感器提供了依据。     

T8钢—聚有机硅氧烷仿生减粘降阻复合涂层的特性

研究了Ｔ８钢－聚有机硅氧烷仿生减粘降阻复合涂层的表面润湿性，磨料磨损性及土壤的减粘降组性能，与金属材料相比，仿生复合涂层的表面憎水性显著提高，水在其表面上的接触角达９２°；与４５钢相比，其磨料磨损的体积相对耐磨系数为６３％，降阻率达１５．２２％－－２２．２７％。     

Estimation of true dihedral angles and relative grain boundary energies in polycrystals using the disector

Relative grain boundary energies can be simply related to true dihedral angles, which are the angles between grain boundary planes meeting at triple edges in polycrystals. Some limited efforts in the measurement of true dihedral angles have used the technique of serial sectioning, which is usually cumbersome and time consuming. In this study the three‐dimensional probe called the ‘disector’ has been employed to evaluate true dihedral angles. This probe, combined with automated image processing, introduces precision as well as efficiency, overcomes the disadvantages of the two‐dimensional probe and is far less tedious and less complicated than serial sectioning. It is shown that the technique is relatively simple and therefore can be applied to obtain a significantly large and accurate statistical sample of true dihedral angles. The application of this method is demonstrated by evaluating the triple junction geometry and the associated relative grain boundary energies in polycrystalline 316L austenitic stainless steel.     

Surface designing of polypropylene by critical monitoring of the grafting conditions

The grafting of acrylic acid onto electron beam‐irradiated polypropylene was carried out using preirradiation method. The stability of peroxy radicals was investigated by electron spin resonance. It was found that the decay of peroxy radicals is much faster at 70°C than at 40°C and ambient temperature. The grafting has been observed to be strongly dependent on the monomer dilution in the reaction medium. The grafting was ascertained by attenuated total reflectance (ATR). The distribution of grafts across the samples was monitored by infrared microscopy. It was found that the graft management is considerably influenced by composition of the grafting medium. The grafting involving pure monomer leads to the surface enrichment with the polyacrylic acid chains. The samples grafted in pure monomer led to much lower contact angles as compared to the diluted monomer solution. The swelling of the grafted samples also showed a trend that was governed by the graft management. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 546–553, 2006     

舰船导航信号发生器虚拟化设计

介绍了基于PC总线的便携式舰船导航信号发生器虚拟化设计，着重叙述该仪器硬件设计、基于虚拟仪器开发平台LabWindows／CVI的软件设计。     

基于AutoCAD2000的图解法确定工艺转角

提出了基于AutoCAD2 0 0 0的图解法求解机械加工过程中工艺转角的问题 ,并针对具体的应用实例给出了圆满的解答 ,并验证了其精度。     

一种新型悬臂棒条筛的设计与应用

介绍了一种新型悬臂棒条筛分机械,论述了其结构、工作原理和技术特性。从理论和实践两方面论证了它的结构、处理能力、筛分效率、返矿率都明显优于普通悬臂棒条筛分机械,可广泛应用于高炉槽下烧结矿的筛分作业。     

保证跌落试件姿态的方法

进行包装件的自由跌落试验时,必须保证试件姿态符合标准规定。笔者在实践中总结出一种保证试件姿态和检验试件姿态误差的具体方法。