Effect of processing on in vitro digestibility of protein and starch in quinoa seeds

The in vitro digestibility of protein in raw quinoa assessed by an enzymic method was 78%, significantly ( P > 0.01 ) lower than that of casein, 91%, and also somewhat lower ( P > 0.01) than that of the raw washed quinoa sample, 83%. the process used to remove the outer layers of the seeds containing saponins increased the protein digestibility significantly ( P > 0.01), by 7%. Heat treatments increased protein digestibility over that of raw quinoa samples. Only the cooked sample treated for 60 min presented a slightly lower protein digestibility, 77%, than those obtained for other heat-treated samples.
The temperature, time and moisture used in cooking and autoclaving of whole seeds of quinoa did not improve starch digestibility significantly. the digestibility of the starch in the raw and precooked samples was 72 and 77%, respectively, after drum drying and about 64% after extrusion in both cases. Precooking at 60°C for 20 min does not improve the digestibility of the quinoa starch.     

Dislocations and flux pinning in YBa2Cu3O7

The dislocation structures of bulk textured and epitaxial thin film YBa₂Cu₃O₇ superconductors are examined. Correlations between increases in flux pinning and dislocation densities are noted. A model for flux pinning by individual dislocations is presented. This gives a treatment of strain induced effects and effects of normal state region interactions. It is shown that the values of pinning predicted are in line with experimental observations.     

Evaluation of influence of external magnetic disturbance on superconducting magnet taking conservation of linkage flux into account

External magnetic disturbance influences the quality of the image obtained with a magnetic resonance imaging (MRI) system because it causes magnetic resonance frequency drift. When a superconducting magnet in persistent current mode operation is exposed to external magnetic disturbance coil current varies to keep linkage flux constant. Conventional analysis is usually formulated with constant current and does not provide correct evaluation of drift of magnetic field in the magnet. This paper proposes a method of numerical analysis of magnetic field considering conservation of linkage flux in a superconducting magnet under a persistent current mode operation. This method is applied to evaluate drift of the magnetic field in a superconducting magnet for magnetic resonance imaging due to external magnetic disturbance. Analysis results show good agreement with the experimental results.     

导汽箱产生长裂纹和大面积凹陷原因分析、处理及预防对策

对硫酸废热锅炉锅筒内自然循环的导汽箱产生长裂纹和大面积凹陷的原因作了分析，提出处理该缺陷的方法，确保了锅炉的安全运行，并提高了蒸汽的品质。     

铜互连中SiCOF/a-C∶F双层低介电常数薄膜的制备和表征(英文)

用等离子体化学气相淀积系统制备了一种新颖的SiCOF/a-C∶F双层低介电常数介质薄膜,并用红外光谱表征了该薄膜的化学结构.通过测量介质的折射率发现该薄膜长时间暴露在空气中,其光频介电常数几乎不变.然而,随退火温度的增加,其光频介电常数则会减小.基于实验结果讨论了几种可能的机理.二次离子质谱分析表明在Al/a-C∶F/Si结构中F和C很容易扩散到Al中,但在Al/SiCOF/a-C∶F/Si结构中,则没有发现C的扩散,说明SiCOF充当了C扩散的阻挡层.分析还发现在SiCOF和a-C∶F之间没有明显的界面层.     

热强钛合金BT25组织与性能

介绍了前苏联航空发动机用热强钛合金（或高温钛合金）BT25的发展概况，并对BT25合金的成分特点、热处理强化优点等做了进一步阐述，给出了退火状态下的物理性能，在说明热强钛合金微观组织与力学性能关系的基础上给出了BT25合金的各种力学性能。     

Discrete Modeling and Suggested Measurement of Heat Transfer in Gas-Solids Flows

This article presents a two-dimensional transient model for gas-solids flow and heat transfer through pipes using the coupled Computational Fluid Dynamics and Discrete Element Method approach. Numerical simulations have been conducted to examine the modification of fluid thermal structure due to the presence of particles in a pneumatic transport pipeline. Modeled results have demonstrated the key role of transversal motion of rebounding particles in the pipe cross section in altering fluid temperature. Further implementation of this modeling technique in air-drying processes is discussed and possible experimental methods for the measurement of in situ particle and fluid motion and temperature profile are cited.     

A numerical model for induction heating processes coupling electromagnetism and thermomechanics

This paper presents a mathematical and numerical model developed for coupling the various physical phenomena (electromagnetic, thermal and mechanical) taking place in axisymmetrical induction heating processes. All three electromagnetic, thermal and mechanical models are time dependent and take full account of the electromagnetic and thermal non‐linear effect especially with magnetic materials. The electromagnetic problem is discretized and solved in the workpiece, air and inductors. The heat transfer equation and the mechanical equilibrium equations are solved in the workpiece only, both using a finite element method. The mechanical model can take into account thermoelastic–plastic behaviour for the part. The model has been successfully applied to several cases of induction heating. Comparisons between numerical and experimental results show an excellent agreement. Copyright © 2003 John Wiley & Sons, Ltd.     

Immobilized α-amylase from Bacillus licheniformis: a potential enzymic time—temperature integrator for thermal processing

Biphasic and nth-order models were tested as to their usefulness to fit experimental inactivation data of Bacillus licheniformis α-amylase, immobilized on glass beads, and were discussed with respect to their suitability to characterize the considered enzymic system as a time—temperature integrator (TTI) to evaluate heat processes. Both isothermal and non-isothermal inactivation experiments were carried out. Model (kinetic) parameters (rate constant k, activation energy E_A and reaction order n) were estimated using a non-linear regression procedure. The results obtained, especially the activation energy of about 293 kJ mole^–1, indicated a potential use of this system as a TTI for heating processes in the temperature range of 96–108°C.     

污垢对冷水机组的影响

通过对两个工程实例的冷水机组测试结果对比分析，得出污垢对冷水机组造成了热阻增加，接热效果变差，制冷量减少以及制冷效率下降等严重后果，并推算出机组由此所带来的运行费用的增加。运行管理人员应该注意对机组加强清洗保养工作，以提高机组的经济运行水平。