350m~3高炉煤气净化单文氏管可调喉口理论计算及分析

通过单文氏管可调喉口的理论计算及分析，找出喉口最佳工作状态下的工艺参数及适合这种设备特性的煤气工作参被变化范围，以期能对实际操作过程及运行状态分析提供理论依据，提出单文氏可调喉口在更广泛意义上的设备、工艺参数选择、计算的方法。     

基于"替换法"的汉字加、解密实现技术

文章讨论的基于“替换法”的汉字信息加、解密实现技术,改变了传统的汉字加密结果,使加密后的密文仍是可以识别和再利用的汉字,发送者可以在任何可编辑汉字的通讯设备上发送和接收密文,确保中文信息传输过程中的安全性。加、解密算法实现的代码语言为VFP6.0。     

A New Variable Diffusion Drying Model for the Second Falling Rate Period of Paddy Dried in a Rapid Bin Dryer

The objectives of this article is to propose a new drying model for the second falling rate period known as the variable diffusion controlled period that follows after the first falling rate period and to propose a new method to determine the second critical moisture content that separates these two periods. Experimental work on paddy drying at minimum fluidization velocity was carried out in a rapid bin dryer. The effects of operating temperatures (60-120°C) and bed depths (2-6 cm) on the paddy drying characteristics were investigated. It was found that the normalized drying rate of paddy was proportional to the normalized moisture content in the first falling rate period but in the second falling rate period, the normalized drying rate of the material varies exponentially with the normalized moisture content. The different relationship between the normalized drying rate and the normalized moisture content in the first and second falling rate periods indicate that two different mechanism of moisture transport are at work. The new exponential model of the second falling rate period and the linear model of the first falling rate period were found to fit the experimental data very well. Derivation from variable diffusion equation shows that the linear model is the result of constant diffusion coefficient whereas the new exponential model is the result of linear diffusion coefficient. This also implies that the first falling rate period is a constant diffusion controlled period and the second falling rate period is a variable diffusion controlled period. In addition, drying kinetics data of a drying process that fits the exponential model over a very slow drying period will show that the drying process is under the effect of a linear diffusion coefficient. It was also found that the proposed new method to determine the second critical moisture content that distinguishes between the first and second falling rate periods by using a sudden change in the value of the drying rate gradient to a much lower value at that point is more rigorous and yet simpler than the method of determining the specific location of the receding drying boundary since it is based on the behavior of the actual drying kinetic data.     

Formation of low-resistivity poly-Si and SiNx films by Cat-CVD for ULSI application

In this paper, bulk-Si metal–oxide–semiconductor field effect transistors (MOSFETs) are fabricated using the catalytic chemical vapor deposition (Cat-CVD) method as an alternative technology to the conventional high-temperature thermal chemical vapor deposition. Particularly, formation of low-resistivity phosphorus (P)-doped poly-Si films is attempted by using Cat-CVD-deposited amorphous silicon (a-Si) films and successive rapid thermal annealing (RTA) of them. Even after RTA processes, neither peeling nor bubbling are observed, since hydrogen contents in Cat-CVD a-Si films can be as low as 1.1%. Both the crystallization and low resistivity of 0.004 Ω·cm are realized by RTA at 1000 °C for only 5 s. It is also revealed that Cat-CVD SiN_x films prepared at 250 °C show excellent oxidation resistance, when the thickness of films is larger than approximately 10 nm for wet O₂ oxidation at 1100 °C. It is found that the thickness required to stop oxygen penetration is equivalent to that for thermal CVD SiN_x prepared at 750 °C. Finally, complementary MOSFETs (CMOSs) of single-crystalline Si were fabricated by using Cat-CVD poly-Si for gate electrodes and SiN_x films for masks of local oxidation of silicon (LOCOS). At 3.3 V operation, less than 1.0 pA μm⁻¹ of OFF leakage current and ON/OFF ratio of 10⁷–10⁸ are realized, i.e. the devices can operate similarly to conventional thermal CVD process.     

深基坑施工安全的监测与实例

从明确深基坑施工安全监测的关键出发，确定了监测内容和相关极限报警值，用工程实例进行了阐述。     

The Content Driven Mobile Internet

The development of future mobile networks will be driven, in large part, by content and web based services. In this paper, we examine several performance, scalability and architectural challenges faced by future mobile web applications and how advanced mobile content delivery techniques can address these challenges. We review existing content delivery using a taxonomy that consists of three categories: network scaling, end system acceleration, and content and protocol optimization. While wireline content delivery focuses on network and server scalability, mobile content delivery will likely benefit most from optimizing radio link usage. We also present our ongoing work in this area, which extends the functionality of edge caching to the terminal, uses user interest correlation information to maintain low terminal power consumption and adds a new dimension to radio resource management. This revised version was published online in August 2006 with corrections to the Cover Date.     

The Effect of Moisture Content on the Conversion of Ergosterol to Vitamin D in Shiitake Mushrooms

The distribution of ergosterol in different parts of shiitake mushrooms was studied in order to optimize the conversion of ergosterol to vitamin D₂ during drying. The effect of moisture on the conversion of ergosterol to vitamin D₂ was also investigated by adjusting the moisture content of fresh mushrooms to different levels in a large vacuum desiccator and subjecting them to UV irradiation at 290-320 nm wavelength, for 2 h. The moisture, ergosterol and vitamin D₂ contents were determined using standard procedures. It was found that the ergosterol content on a dry matter basis of fresh shiitake mushroom was highest in the gills (10.6 ± 0.99 mg/g DM), followed by the cap or pileus (5.34 ± 0.64 mg/g DM) and was least in the stalk or stipe (2.97 ± 0.56). The moisture content had a marked influence on the conversion of ergosterol to vitamin D₂, the best conversion taking place at a moisture content of about 70% on a wet basis.     

Spatiotemporal aspects of jerky flow in Al–Mg alloys, in relation with the Mg content

The spatiotemporal aspects of the Portevin–Le Chatelier effect in Al–Mg alloys are investigated using direct observations of the sample surface with a digital camera. Optical measurements of the surface profile using a white light interferometer allow the estimation of the local strain and strain rate associated with the bands. The effect of Mg content on instability characteristics is analyzed. The reloading time is shown to depend on the Mg content only at the strain and strain rates where type C bands are observed.     

霍林河一号露天矿煤层灰分变化规律的研究

详细地论述了霍林河一号露天矿各煤层的灰分特征和同一煤层不同地段灰分的变化情况,揭示了各煤层灰分的变化规律,为露天开采提供了可靠的技术保证。     

气体悬浮焙烧炉内衬烘炉曲线的确定

根据所使用的低水泥浇注料的性能，对中铝山西分公司检修厂4号焙烧炉制定了合理的烘烤曲线，提高了耐火内衬的质量，延长了内衬的使用寿命。