Equations of state for hard-sphere fluids

Equations of state and contact values of hard-sphere radial distribution functions (rdf's) which are given by a linear combination of the Percus— Yevick and scaled-particle virial expressions are considered. In the one-component case the mixing coefficient() is, in general, a function of the volume fraction. In mixtures the coefficient( _i ,d _i ), in general, depends upon the volume fraction _i , and diameterd _i , of each species,i andj. For the contact valuesY _ij of the rdf's, the mixing coefficients _ij ( _k ) also depend on speciesi andj. Density expansions for the exact for the one-component hard-sphere fluid are obtained and compared with several approximations made in earlier works and in our own work, as well as with simulations. For a mixture, it turns out that one cannot obtain the exact fourth virial coefficient by using a linear combination of the Percus-Yevick and scaled-particle virial expressions forY _ij unless one allows _ij to depend on mole fractionsx _i even at the zeroth order of its density expansion. We also find that _ij must depend on particle speciesi andj in order to satisfy the exact limits obtained earlier by Sung and Stell. A new equation of state for the binary hard-sphere mixture which satisfies all the exact limits we have considered is suggested.Paper presented at the Tenth Symposium on Thermophysical Properties, June 20–23, 1988, Gaithersburg, Maryland, U.S.A.     

Thermophysical properties data on molten semiconductors

Thermophysical properties of molten semiconductors are reviewed. Published data for viscosity, thermal conductivity, surface tension, and other properties are presented. Several measurement methods often used for molten semiconductors are described. Recommended values of thermophysical properties are tabulated for Si, Ge, GaAs, InP, InSb, GaSb, and other compounds. This review shows that further measurements of thermophysical properties of GaAs and InP in the molten state are required. It is also indicated that a very limited amount of data on emissivity is available. Space experiments relating to thermophysical property measurements are described briefly.Nomenclature Density - C _p Specific heat - Kinematic viscosity - Dynamic viscosity= - Thermal diffusivity - Thermal conductivity=C_p - Volumetric thermal expansion coefficient - Surface tension - d/dT Temperature coefficient of surface tension - g Gravitational acceleration - T Temperature - T Temperature difference - L Characteristic dimension     

Study of viscosity of mono-, di-, and trialkylamines

Viscosities of several mono-, di-, and trialkylamines have been measured in the temperature range 298 to 333 K. It is observed that viscosities are highly dependent on shape, size, and association through H-bond or through dipole. Following the transition state theory, energy, Gibbs free energy, and entropy of activation of viscous flow have been calculated. The values of expansion energy for these liquids have also been calculated using free volume theory, and subsequently amines have been classified as volume-restrained or energy-restrained liquids. The group contribution method of Van Velzen, Cardozo, and Langenkamp for estimating viscosity has been examined with the present and literature data, and the new group contribution increments N _i and B _i for amines have been evaluated.     

基于ASM的混合式情境感知共享机制研究

移动的用户能够方便地访问分布在普适计算环境中的传感器,进而获得情境信息,是情境感知系统的核心目标。本文提出了一种融合分布式P2P和Publish/Subscribe模式的混合式情境感知共享机制,基于抽象状态机对该机制的高鲁棒和可扩展的特性进行设计和规约,并采用AsmL测试工具生成有限状态机验证该机制的有效性和合理性,表明该机制可满足动态的分布式情境感知系统要求。     

The Structure of the Irreversibly Bound Adhesion Promoter-Substrate Interfacial Layer of γ-Aminopropylsilanetriol on Crystalline Si, as Measured by XPS and FTIR

The irreversibly bound interfacial layer deposited by the γ-aminopropysilanetriol adhesion promoter onto a crystalline silicon substrate, which remains even after profuse washing, was found by XPS to have resulted from the fragmentation and rearrangement of the original γ-aminopropylsilanetriol molecule. A mechanism is proposed, involving the homolytic scission of the terminal N-C bond. One of the subsequent reactions is believed to involve hydrogen loss by abstraction and the formation of a terminal vinyl group, which bonds to the substrate. Support for this mechanism is found in IR spectroscopy of this layer.     

Some aspects of the analysis of coal by X-ray fluorescence spectroscopy

Bituminous coal samples from 84 distinct sources were analysed by conventional British Standards (BS) methods for phosphorus, sulphur, chlorine, ash and the ash-forming elements (calcium, silicon, aluminium, iron, sodium, magnesium, potassium, titanium and manganese). In most cases four determinations were made per element per source. Samples were crushed to ?212 μm (72 BS mesh) and pressed into aluminium cups at 20 t in^?2 (309 MPa) without binder or backing. Two pellets from each sample were analysed by wave-length dispersive X-ray fluorescence techniques, using a spectrometer equipped with a rhodium rube; the X-ray count took 60 s. The X-ray results were calibrated against the conventional results using multiple regression. The accuracy obtained was comparable with routine ‘wet chemical’ techniques. The X-ray technique is suitable for the routine determination of large numbers of samples.     

High resolution XPS characterization of chemical functionalised MWCNTs and SWCNTs

High resolution XPS analysis of chemical functionalised multi-wall carbon nanotubes (MWCNTs) and single wall carbon nanotubes (SWCNT) was done with ESCA300 (overall instrument resolution of 0.35 eV). Information to the degree of functionalisation was ascertained by argon ion bombardment of the samples followed by XPS analysis to detect the functional groups, the percentage atomic concentration of various elements present and whether or not the detected functional groups imposed a chemical shift on the CNT atoms. The results show that true chemical functionalisation was achieved and by argon ion bombardment these functional groups can be altered relative to the C 1s carbon atoms of the CNT. The choice of chemicals used for functionalisation, the techniques employed and the types of nanotubes treated are important factors in chemical characterisation. The carbon atom on the nanotube ring to which the functional group (atom) is bonded, the chirality of the CNT, the electronegativity of the functional group, the bond type and whether the CNT is single-wall or multi-wall, or cut (short) could play a role in determining the chemical shift on the CNTs atoms. These investigations are relevant to chemical functionalisation of carbon nanotubes for various applications for example DNA sensors and other biomedical sensors.     

Diluent effects on carbonate mobility in bisphenol-A polycarbonate in the solid state

The effect of miscible low molecular weight additives on the mobility of the carbonate group in bisphenol-A polycarbonate (BPAPC) has been studied using n.m.r. and dielectric relaxation experiments in the solid state. Proton-enhanced dipolar-decoupled carbon-13 n.m.r. spectra of BPAPC, isotopically enriched at the carbonate position, are obtained without magic-angle sample spinning. The resolved chemical shift anisotropy allows study of nuclear spin relaxation for the carbonate groups in the polymer that have different orientations relative to the static magnetic field in the laboratory frame. The spin-lattice relaxation time in the rotating frame (T_1?) is measured at a motional-probe frequency of 50 kHz for the undiluted polymer and for BPAPC-diluent blends containing either dibutylphthalate or dinitrobiphenyl. The T_1? exhibits some dependence on orientation in all systems studied. In the blend containing dibutylphthalate (DBP), T_1? is decreased by a factor of two for all orientations of the carbonate group. This implies that DBP substantially increases the spectral density of 50 kHz motions in the carbonate region of the polymer at ambient temperature. In contrast, dinitrobiphenyl does not significantly alter the Fourier component of thermal fluctuations at 50 kHz. Dielectric relaxation measurements at 10 kHz reveal that the primary (T_g) and secondary (β) motional processes in BPAPC are affected by low molecular weight additives. An intermediate relaxation process appears in the temperature interval between the glass transition temperature (T_g) and the sub-T_g β-relaxation (T_β) in the polymer-diluent blends. The n.m.r. spin-lattice relaxation rate in the rotating frame, T^?1_1?, correlates well with the relative magnitude of the dielectric dissipation factor (tan δ_ε) between T_g and T_β.