数控小孔冲床网眼平板加工中的波浪纹缺陷成因分析及排除

文章就数控小孔冲床加工纺织烘干设备中帘子网眼平板产生波浪纹缺陷的原因,进行了全面、详细的理论分析.在排除机床、模具精度影响的基础上,针对压料机构运动误差产生的机理和不利影响,详细分析了网眼冲孔加工产生波浪纹缺陷的根本原因,提出了相应的改进措施,在实践中具有良好的实用效果.     

A modified embedded-atom method interatomic potential for the Fe–H system

A modified embedded-atom method (MEAM) interatomic potential for the Fe–H binary system has been developed using previously developed MEAM potentials of Fe and H. The potential parameters were determined by fitting to experimental data on the dilute heat of solution of hydrogen in body-centered cubic (bcc) and face-centered cubic (fcc) Fe, the vacancy–hydrogen binding energy in bcc Fe, and to a first-principles calculation for the lattice parameter and bulk modulus of a hypothetical NaCl-type FeH. The potential accurately reproduces the known physical properties of hydrogen as an interstitial solute element in bcc and fcc Fe. The applicability of the potential to atomistic approaches for investigating interactions between hydrogen atoms and other defects such as vacancies, dislocations and grain boundaries, and also for investigating the effects of hydrogen on various deformation and mechanical behaviors of iron is demonstrated.     

ZnO压敏陶瓷的非线性功能添加剂

本文采用单元掺杂与多元掺杂的方法，系统研究了几种过渡金属氧化物添加剂在控制ＺｎＯ压敏陶瓷非线性方面的作用，并根据金属阳离子外壳层电子结构稳定性和缺陷化学反应进行了分析，认为阳离子具有不饱和外层电子结构且半径与Ｚｎ＾２＋离子相近的过渡金属氧化物能改善ＺｎＯ压敏陶瓷非线性。     

5000m3液氨球罐缺陷分析

介绍建峰化工总厂化肥厂液氨球罐在进行周检时发现的缺陷及状况。针对不同类型缺陷 ,对其出处、成因按相关标准理论进行详细分析 ,运用规程进行强度校核、评定 ,得出球罐在下一检验周期前仍然安全可靠 ,提出了预防措施和建议     

太阳能吸热功能膜材质

材质中电子能级和振转能级决定光谱的选择性。     

Stochastic defect diffusion model for relaxation effects in crystalline polyethylene

It is suggested that some relaxation processes observed in crystalline polyethylene are consequences of the diffusive motion of a particular defect called a point dislocation or twist dispiration loop along the polyethylene stems in lamellar crystals. The motion of the defect, characterized by a diffusion coefficient and a mobility, is described by solutions of the Smoluchowski diffusion equation with boundary conditions that constrain the defect to move along routes that produce experimentally observable results. The fact that passage of the defect causes both a 180° rotation of the chain and moves an extra CH₂ group in the direction of the chain axis is important to the interpretation of the data according to this model. The diffusion coefficient for a defect is estimated to be around 2 × 10^?9 cm² s^?1 at 70°C. This value is shown to be reasonable both from the viewpoint of detailed computer modelling of defect motion and contemporary ideas about scaling.     

基于轮廓波变换的织物疵点图像消噪新方法

为了实现织物疵点图像的有效消噪,使其更有利于特征提取和疵点检测,提出了基于轮廓波变换的织物疵点图像消噪新方法。综合考虑轮廓波方向子带能量的大小与织物疵点图像轮廓细节之间的关系,对Donoho多尺度分解阈值进行修正,改进了Donoho多尺度分解阈值对图像细节"过扼杀"的缺点。实验结果表明,对织物疵点图像进行基于轮廓波变换改进阈值消噪时,该方法更好地保留了织物疵点图像的轮廓细节,峰值信噪比显著提高。采用改进的轮廓波Donoho多尺度分解阈值消噪后的图像,可以更好地应用于织物疵点图像的特征提取和疵点识别。     

Diamond growth by carbon ion implantation of diamond

Medium energy (5–25 keV) ¹³C⁺ ion implantation into diamond (100) to a fluence ranging from 10¹⁶ cm⁻² to 10¹⁸ cm⁻² was performed for the study of diamond growth via the approach of ion beam implantation. The samples were characterized with Rutherford backscattering/channelling spectroscopy, Raman spectroscopy, X-ray photoemission spectroscopy and Auger electron spectroscopy. Extended defects are formed in the cascade collision volume during bombardment at high temperatures. Carbon incorporation indeed induces a volume growth but the diamond (100) samples receiving a fluence of 4 × 10¹⁷ to 2 × 10¹⁸ at. cm⁻² (with a dose rate of 5 × 10¹⁵ at. cm⁻² s⁻¹ at 5 to 25 keV and 800 °C) showed no He-ion channelling. Common to these samples is that the top surface layer of a few nanometers has a substantial amount of graphite which can be removed by chemical etching. The rest of the grown layer is polycrystalline diamond with a very high density of extended defects.     

应用骨形成蛋白与胶原膜复合物修复大鼠颅骨缺损

目的探讨骨形成蛋白(BMP)与胶原膜复合物(复合膜)修复大鼠颅骨缺损的效果。方法将BMP与胶原膜复合,在大鼠颅骨制备骨缺损,分别采用双侧覆盖复合膜、外侧覆盖复合膜进行治疗,以外侧覆盖胶原膜作为平行对照,并设空白对照。于术后2、4、6周,取标本进行X线检查及组织学观察。结果 两个覆盖复合膜组的缺损成骨面积百分比明显高于覆盖胶原膜的平行对照组(P<0.01)。术后4、6周,双侧覆盖复合膜组的成骨面积百分比明显大于单侧覆盖复合膜组(P<0.05)。双侧覆盖复合膜组的缺损术6周后已达骨性愈合。结论BMP与胶原膜复合既具有机械性阻挡作用,又具有骨诱导性,能加速骨缺损愈合。     

影响AlN陶瓷热导率的本征氧缺陷

对ＡｌＮ晶格中的铝空位，延展缺陷等进行了研究，研究表明，在固溶氧浓度较低（〈０．７５，原子百分数）的高热导率ＡｌＮ试样中，铝空位的存在会造成的ＡｌＮ晶胞局域收缩的现象，并观察到了铝空位的存在；固溶氧浓度较高（〉０．７５％）时，孤立的缺陷产生团聚，形成铝氧八面体；在氧浓度很高（〉０．７５％）的低热导率试样中观察到了反相区，多型体等延展缺陷。