宽频介电谱仪热激励去极化电流功能研究

利用宽频介电谱仪拓展热激励去极化电流模块测量介质材料的TSDC操作简单实用,它不仅容易把材料中的各种不同活化能或弛豫时间的荷电粒子区分开,并且能从TSDC谱中直接得出被测材料的介电性能以及相关微观参数,这为研究材料内部机理提供了一条捷径。     

钴钇掺杂（Ba,Sr）TiO_3基介电陶瓷的制备与性能研究

采用二次固相反应法制备Ba0.7Sr0.3TiO3介电陶瓷,研究了掺杂钴、钇离子对钛酸锶钡介电性能的影响。结果表明,陶瓷样品Y3＋、Co3＋的最佳掺杂浓度分别为0.04mol%和0.05mol%,最佳烧结温度为1340℃,样品的相对介电常数为4200,介电损耗（tanδ）为0.005。样品的结构为四方晶系,P4mm空间群。获得了高介电常数、低损耗的Ba0.7Sr0.3TiO3介电陶瓷。     

永磁同步伺服电动机的动态参数

动态参数是影响伺服电动机动态性能最主要的因素之一.动态参数的高低直接决定伺服电动机动态及稳态性能的好坏.对传统的伺服电动机而言,几个主要的动态参数都有较清晰的定义和概念,长期以来在工程实践中广泛使用.但对正弦波驱动的永磁伺服电动机来说,电机的力矩常数Kt、反电势常数Ke、电气时间常数τe、机械时间常数τm和阻尼因数D等都有了新的变化,实践中常引起误解和混淆.文中主要分析永磁同步伺服电动机几个动态参数的含义以及和传统参数之间的差异,并从控制系统的要求出发,对几个最基本的动态参数和参数之间的相互关系进行分析,得出了一些实用的结论.     

Reduction of electromagnetic field coupling to microwave microstrip circuits

The signals induced by an external electromagnetic field along a microstrip line on a multilayered dielectric substrate were studied. The main target of the work is not to introduce a new technique of study but to search for suitable combinations of the structural and geometrical characteristics of the printed geometry whereby the electromagnetic interference of the external field to the circuit would be reduced. This reduction is desirable in all modern applications. The results derived prove that this object can be achieved at high frequencies and when the substrate is multilayered.     

选择溶解条件--ICP-AES法测定铝合金中10元素

在铝合金中,对常量、微量、痕量元素等的测量,传统上采用化学的方法来分析,手续繁杂,分析时间 亦长,有时不能满足大批量快速分析的要求。ICP-AES分析法,以其优异的分析性能被广泛应用于各种材料 的主要、次要,痕量、超痕量多元素的同时分析。但是,影响等离子炬状态的因素很多,只有在最佳工作状态下 操作,才能充分发挥ICP光源的优越性。     

The Metal-Dielectric Resonator Method of Measuring the Parameters of Radio Materials

The use of symmetrical H- and E-modes and asymmetrical E-modes in a longitudinally anisotropic dielectric cylinder with metal mirrors at the ends to measure its permittivity and dielectric loss tangent is considered. It is shown that the method has wider possibilities compared with the IEC-61338 recommendations. The results of a measurement of the dielectric parameters of a number of materials in the 2–78 GHz frequency band, including the permittivity tensor of sapphire, are presented. __________ Translated from Izmeritel'naya Tekhnika, No. 9, pp. 65–70, September, 2005.     

双机架可逆冷轧机张力控制系统的研究

文章针对双机架可逆冷轧机的特点和轧制工艺要求,采用间接张力与直接张力复合控制法以实现卷取恒张力控制;提出了机架间张力控制系统的组成,描述了两种调张法的控制原理与实现方法.     

An Entrapment Model of Water Flow on Fine Coal Flotation

Effect of entrapment of water flow on fine coal flotation was studied. The relation between constant of water flotation rate and flotation time was investigated and the water recycling model determined. The entrapment model of water flow about the relation between the recovery of fine particle and that of water in concentration was established. Finally, the equation about ash in fine clean coal at any time was derived by introducing a de-ashing coefficient.     

Fractal characteristics of electric properties of coal

In the light of fractal geometry theory, the characteristics of coal＇s electric parameters （including dielectric constant, alternating conductivity, dielectric loss angle tangent and electric polarization constant） were studied by using literature data. The results are shown that the electrical properties of coal have fractal characteristic. The fractal dimensions of dielectric, alternating conductivity, dielectric loss angle tangent were obtained, and are relative to the content of pyrite sulfur, heat and ash content of coal.     

大型风力发电场并网接入运行问题综述

指出风电场与常规能源电厂的主要区别,介绍了恒速恒频和变速恒频两种风力发电系统的运行原理及各自接入电力系统的现状和主要问题,阐述了风力发电场并网过程时电网产生冲出,风电场运行对电能质量、保护装置、电网频率和对电力系统运行成本等几方面产生的影响.