差齿原理在推床同步调整技术中的应用

文章应用差齿原理在冶金设备初轧机推拉床实施转角性微调技术，以达到初轧机机前与机后推拉床同步调整效果．实践证明，效果显著，适用面广，且操作简单、方便经济．     

一种降低电离层梯度影响的Hatch滤波算法

目前,地基增强系统（Ground-Based Augment System,GBAS）中的主要问题是：尽管使用载波平滑降低了伪距噪,利用差分技术消除了用户和基准站间的大部分共同误差,从而减少了差分改正值中的误差。但是电离层时间梯度和空间梯度于这两个过程中产生了额外的误差,阻碍了差分改正值质量的进一步提高。基于对电离层时间和空间梯度引起的额外误差的分析,并考虑平滑伪距噪声,文章提出了一种新的Hatch滤波方法,该滤波器的时间常数是随卫星仰角、电离层时间和空间梯度以及用户与参考站之间的距离而实时变化的。该方法降低了差分改正值误差,提高了定位精度。并且通过差分定位仿真并对比传统的单频Hatch滤波方法,发现使用该方法后,减小了差分校正值的误差。     

差分扩频技术在移动水声通信中的应用

提出了基于差分相干解调法的DS/BDPSK水声通信技术,在接收端采用差分相干解调的方法,解决了在水声通信中载波估计较难的问题,可克服传输过程中由于载波漂移产生的频率和相位误差.通过计算机仿真研究、湖试试验,验证了该系统在复杂的水声信道中具有较强的抗多径能力、抗多普勒能力,能实现低误码率通信,具有较好的有效性和鲁棒性.     

虚拟现实技术在反恐训练中的研究进展

介绍了虚拟现实技术的国内外研究现状,以及仿真技术与虚拟现实技术结合使用的发展趋势.为了更好地履行反恐使命,适应形势的发展,有必要提高反恐教学训练质量,创新反恐行动教学训练手段.将仿真技术和虚拟现实技术应用于路边炸弹的虚拟及仿真,能使反恐受训者不受时间、空间、经费和器材的限制,利用各种3D虚拟模型任意组装不同起爆方式下的路边炸弹,拓展其想象空间和创新思维,使之对路边炸弹的结构组成、工作原理及爆炸效应等有深刻理解.     

Differential Evolution Algorithm Based Self-adaptive Control Strategy for Fed-batch Cultivation of Yeast

In the fed-batch cultivation of Saccharomyces cerevisiae, excessive glucose addition leads to increased ethanol accumulation, which will reduce the efficiency of glucose utilization and inhibit product synthesis. Insufficient glucose addition limits cell growth. To properly regulate glucose feed, a different evolution algorithm based on self-adaptive control strategy was proposed, consisting of three modules (PID, system identification and parameter optimization). Performance of the proposed and conventional PID controllers was validated and compared in simulated and experimental cultivations. In the simulation, cultivation with the self-adaptive control strategy had a more stable glucose feed rate and concentration, more stable ethanol concentration around the set-point (1.0 g•L^-1), and final biomass concentration of 34.5 g-DCW•L^-1, 29.2% higher than that with a conventional PID control strategy. In the experiment, the cultivation with the self-adaptive control strategy also had more stable glucose and ethanol concentrations, as well as a final biomass concentration that was 37.4% higher than that using the conventional strategy.     

Discretized LKF method for stability of coupled differential‐difference equations with multiple discrete and distributed delays

Time‐delay systems described by coupled differential‐functional equations include as special cases many types of time‐delay systems and coupled differential‐difference systems with time delays. This article discusses the discretized Lyapunov–Krasovskii functional (LKF) method for the stability problem of coupled differential‐difference equations with multiple discrete and distributed delays. Through independently dividing every delay region that the plane regions consists in two delays to discretize LKF, the exponential stability conditions for coupled systems with multiple discrete and distributed delays are established based on a linear matrix inequality (LMI). The numerical examples show that the analysis limit of delay bound in which the systems are stable may be approached by our result. Copyright © 2011 John Wiley & Sons, Ltd.     

Stability of Impulsive Stochastic Neutral Partial Differential Equations With Infinite Delays

In this paper, we study the existence and asymptotic stability in the pth moment of the mild solutions to impulsive stochastic neutral partial differential equations with infinite delays. Sufficient conditions ensuring the stability of the impulsive stochastic system are established. The results are obtained via the Banach fixed point theorem.     

一种改进的基于多项式滤波的稳态检测方法

化工过程的数据中常常含有较多的随机误差和粗差干扰,导致传统的稳态检测方法无法得到准确的结果,从而降低系统故障诊断的可靠性。针对实际的工业过程数据,提出一种融合自适应平滑技术的稳态检测方法,该方法首先以基于导数分析的自适应平滑算法进行降噪处理,消除随机误差的影响,然后引入阈值拟合技术进一步抑制粗差干扰,以多项式滤波方法对数据进行稳态检测,根据测量信号的趋势特征确定过程是否处于稳态。仿真实验研究表明:融合自适应平滑技术的稳态检测方法能够克服传统稳态检测方法中随机误差和粗差干扰对检测结果的影响,进而显著提高稳态检测处理的准确性,检测结果明显优于传统的基于多项式滤波的检测方法。     

DTA measurements of normal-incommensurate phase transition in (NH4)2ZnCl4 and K2ZnCl4 crystals

Differential thermal analysis (DTA) was applied to determine the changes in enthalpy and entropy of (NH₄)₂ZnCl₄ and K₂ZnCl₄ crystals at their phase transition from the orthorhombic normal phase to the incommensurate phase. The temperature of this transition, T _i , is 406 K for (NH₄)₂ZnCl₄ and 555 K for K₂ZnCl₄ and the entropy changes (S/R) are 0.053 and 0.035, respectively. The low value obtained for S/R is characteristic of incommensurate phase transitions. The results were compared with the data reported for other crystals of the A₂BX₄ family. Thermal properties of the crystals of the A₂ZnCl₄ subgroup were found to the correlated with the length of A-Cl bonds.     

高铝高炉渣系的熔化特性

 为了掌握高Al₂O₃条件下(w(Al₂O₃)为15%以上)高炉渣系的熔化特性,利用差式扫描量热仪分析了不同w(MgO)/w(Al₂O₃)、碱度(R)以及w(Al₂O₃)对高铝高炉渣的熔化温度及熔化热的影响。试验结果表明,炉渣熔化开始温度为1 248～1 291 ℃、熔化结束温度为1 432～1 485 ℃、熔化热为137～211 J/g;当w(Al₂O₃)=15%、高w(MgO)/w(Al₂O₃)时,发生了共晶逆反应,导致高炉炉渣熔化开始温度逐渐降低,但由于高炉炉渣的液相线温度基本未变,所以炉渣熔化结束温度基本未发生改变;w(Al₂O₃)为20%时,随着w(MgO)/w(Al₂O₃)的增加,炉渣中易生成熔点较高的镁铝尖晶石,导致高炉炉渣熔化开始温度逐渐增大,与此同时,炉渣液相线温度逐渐降低,导致炉渣熔化结束温度逐渐降低;随着碱度R的增加,高炉炉渣中生成了具有高熔点的化合物、炉渣的液相线温度升高,使得高炉炉渣的熔化开始温度逐渐增加、炉渣熔化结束温度逐渐升高;随着w(Al₂O₃)的增加,发生了共晶逆反应,故炉渣的熔化开始温度逐渐降低,而随着w(Al₂O₃)的增加,炉渣中键能较大的Al—O键增多,需要在更高温度下才能实现炉渣的最终熔化,即熔化结束温度逐渐增加;随着w(MgO)/w(Al₂O₃)、R以及w(Al₂O₃)的增加,炉渣熔化热逐渐增多。分析认为,随着R的增加,炉渣中有高熔点化合物的生成,熔化热增加;随着炉渣中w(Al₂O₃)的增加,炉渣中Al—O键增多,解聚破坏熔渣结构消耗的热量增多;而随着w(MgO)/w(Al₂O₃)增加,高熔点化合物的生成或熔化开始温度降低,造成熔化热增加。