An Arctangent Unwrapping Technique of Photoelasticity Using Linearly Polarized Light at Three Wavelengths

Abstract:  In the automatic measurements of the principal stress directions ψ and the total relative phase retardation ρ _tol, ψ and ρ _tol can be easily obtained by the phase unwrapping method using the arctangent function. However, only some published works exist on the measurements of ψ and ρ _tol by photoelastic techniques using a linearly polarised incident light source. This paper presents the technique of applying an unwrapping by means of the arctangent function to photoelasticity. The technique overcomes the error associated with the quarter-wave plate by using an incident light of different wavelength and does not need an interpolation for the determination of ψ . The technique is validated by determining ψ and ρ _tol for the well-known circular disk subjected to a diametral compressive load model.     

Multi‐layered flat‐surface micro‐optical components directly molded on an LCD panel

Abstract— We have developed a process to fabricate optical components, such as a lens, prism, or diffuser, directly on to a glass substrate. Processes include precision mastering by diamond cutting and multi‐layer photopolymer (2P) molding to realize flat surfaces and the integration of multiple components with an alignment within a few micrometers.     

反散射数字辐射成像系统

反散射成像法是数字辐射成像的主要方法之一，介绍了获得反散射数字图像的实验装置，并着重分析了针对此装置获得的反散性图像的处理方法。     

数字化变电站网络仿真平台探讨

通信网络设计是数字化变电站系统设计的核心内容之一，直接关系到数据传输的实时性和变电站各种功能的实现。文中提出了利用网络仿真平台对变电站通信网络进行设计的构想，分析了在数字化变电站不同的发展阶段，通信网络设计的主要内容和网络仿真平台的主要功能及意义，介绍了其结构和仿真流程，重点讨论了仿真模型、仿真内核、通信分析器等开发过程中需要解决的几个关键问题。     

一个安全有效的身份鉴别协议与对应的数字签名方案

本文利用二元一次不定方程和Schnorr身份鉴别协议，构造出一个新的身份鉴别协议，该协议在RSA问题和离散对数问题是难解的假设下是安全的，同时给出了所对应的数字签名方案。     

基于OTA的多功能电压模滤波器及其仿真

本文采用信号流图法设计了一种基于ＯＴＡ的三输入一输出多功能电压模滤波器新电路，该电路由五个ＯＴＡ和两个接地电容构成，合理选择输入电压可实现低通、高通、带通、带阻及全通滤波功能。文章还对电路进行了ＭＯＳ管级的计算机仿真，其结果表明所提出的电路方案正确有效。     

A novel robust current control approach using adaptive line enhancer for three‐phase current‐source active power filter

An effective system control method is presented for applying a three‐phase current‐source PWM converter with a deadbeat controller to active power filters (APFs). In the shunt‐type configuration, the APF is controlled such that the current drawn by the APF from the utility is equal to the current harmonics and reactive current required for the load. To attain the time‐optimal response of the APF supply current, a two‐dimensional deadbeat control scheme is applied to APF current control. Furthermore, in order to cancel both the delay in the two‐dimensional deadbeat control scheme and the delay in DSP control strategy, an Adaptive Line Enhancer (ALE) is introduced in order to predict the desired value three sampling periods ahead. ALE has another function of bringing robustness to the deadbeat control system. Due to the ALE, settling time is made short in a transient state. On the other hand, total harmonic distortion (THD) of source currents can be minimized compared to the case where ideal identification of the controlled system can be made. The experimental results obtained from the DSP‐based APF are also reported. The compensating ability of this APF is very high in accuracy and responsiveness although the modulation frequency is rather low. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(1): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20014     

用于频率合成器的低损耗声表面波滤波器

简述了产生声表面波滤波器插入损耗的主要机理和获得低损耗的原则；介绍了根据此原则对１００～５００ＭＨｚ５种滤波器的研制过程和结果。实验表明，采用镜像阻抗连接换能器结构可达到３～４ｄＢ的低损耗，并成功地应用于频率合成器中。