Cationic microgel emulsion with a high solid content by a multistep addition method in inverse microemulsion polymerization

The multistep addition of a monomer and initiator was developed to successfully synthesize cationic polyacrylamide microgels with solid contents (SCs) greater than 35% and cationic monomer concentrations of 0–40 mol % by inverse microemulsion polymerization. Two feed methods, three‐step nonuniform addition and five‐step uniform addition, were implemented to obtain microgel emulsions with 37% SC. The former addition method was designed according to the solubilization limit of the microemulsion before step polymerization, and that of the latter was a constant based on the remaining surfactant weight in the reactor. The product properties in the intermediate processes of these two methods were compared by dynamic light scattering and viscosity measurement. The results show that the products here were translucent microemulsions instead of milky ones when they were synthesized by a semicontinuous polymerization. Also, the particle sizes of these two methods were almost the same; this indicated that the oscillation phenomenon in continuous polymerization at a high SC was avoided. With the former feed method, the risk and operation cost in the synthesis process could be cut down greatly. Moreover, the viscosity of the cationic microgel emulsion conformed to the Krieger–Dougherty equation with a greater value of intrinsic viscosity than that of a hard‐sphere system because of an electroviscous effect. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40585.     

丙烯酸酯改性水性聚氨酯乳液的合成及胶膜性能研究

以异佛尔酮二异氰酸酯（IPDI）、聚碳酸酯二醇（PCDL）、二羟甲基丙酸（DMPA）三乙胺（TEA）、甲基丙烯酸甲酯（MMA）、丙烯酸丁酯（BA）为原料,采用原位乳液聚合法制备水性聚氨酯-丙烯酸酯（WPUA）复合乳液。考察了聚氨酯（PU ）含量、m(MMA):m(BA)、初始-NCO与-OH物质的量之比等因素对WPUA复合乳液及其胶膜性能的影响。结果显示,当w(PU)质量分数为80%、初始n(-NCO):n(-OH)=6.0、w(DMPA)=5%、m(MMA):m(BA)=4:6时,所得WPUA乳液性能稳定,其胶膜吸水率降低至9.80%,相比较未改性的聚氨酯胶膜的吸水率24.75%,其吸水率降低了60.4%;改性胶膜的拉伸强度达到28.9MPa,是未改性聚氨酯胶膜的1.53倍,制备出了性能稳定、具有优异耐水性和物理机械性能的WPUA复合乳液。     

4A分子筛合成研究

本实验主要以化学原料、高岭土和凹凸棒石粘土为原料,通过酸化,碱化,成胶,晶化这一工艺过程,利用传统水热法成功合成了4A分子筛,并通过微波法进行对比。实验过程使用光学显徽镜进行观察;产品通过X射线粉末衍射、NEXUS670型傅里叶红外光谱仪进行了表征。结果表明,传统水热法与微波法均能合成出4A分子筛,并且微波法合成出的样品粒度小且均匀,合成时间大幅减少,降低了能耗。     

Properties and carbonization behavior of asphalt modified with the THF-soluble fraction of a coal liquefaction residue

This study focuses on the effects of the tetrahydrofuran-soluble fraction of direct coal liquefaction residue as a modifier to modify asphalt with formaldehyde. The properties and carbonization behavior of matrix asphalt and the modified asphalts were studied. The results indicate that the ductility properties of modified asphalts have been effectively improved. The morphology of modified asphalts without the addition of formaldehyde is a set of uniform distribution point, and it is converted from linear distribution to clustered distribution observed in fluorescence microscope images with the increase of the adding amount of formaldehyde.     

Silicon in intericosahedra chains of boron carbide

Interaction between boron carbide and silicon was studied at 1400–1700 ℃ in a vacuum. The results at 1400 ℃ suggest that silicon substitutes a single atom of carbon per formula unit B₁₂C₃, producing a phase with increased lattice parameters. Temperature increase improves the degree of transformation, but at 1700 ℃, the product starts to lose silicon. Analysis of DFT formation energies of configurations with B₁₂C₃ and B₁₂C₂Si stoichiometries shows that B₁₂C₂Si may have two ground states with practically equal stability. The first is B₁₁Si(C-B-C) with silicon in icosahedral polar position, and the second is B₁₂(C^Si^C), where the silicon is in the middle of an angular chain. The latter is suggested to be more favorable during the synthesis, while the former is very close to equilibrium with its precursor B₁₁C(C-B-C), and its formation may be inhibited. Comparison of XRD patterns for the synthesis products and modeled structures seems to confirm this suggestion.     

新型溴化聚醚PBrMEO的合成及表征

以1,4-丁二醇为起始剂,三氟化硼乙醚络合物为催化剂,3-溴甲基-3-乙基氧杂环丁烷为单体,二氯甲烷为溶剂,按阳离子开环聚合机理,首次合成出新型溴化聚醚(PBrMEO),用IR、1HNMR、GPC、TGA、DSC等测试方法对合成产物进行了表征.结果表明,制备出的PBrMEO均聚物Mn为3000,相对分子质量分布为1.243～1.301,Tg为32.36℃,熔程为118.96～132.84℃,热分解温度为337℃.     

基于微粒群算法的纹理合成图像修补方法

提出了一种基于微粒群算法（PSO）的纹理合成图像修补方法。针对基于块的纹理合成算法中常用的匹配块全搜索效率低下的问题,对候选区域采样确定初始微粒,利用PSO算法搜索得到最优匹配块。实验结果表明了方法的有效性。     

二茂铁-肽衍生物的合成及对木瓜蛋白酶的检测

以二茂铁为起始原料合成了二茂铁-肽衍生物Boc-HN-Fca-Gly-Gly-Tyr-Arg-OMe,采用循环伏安法对Boc-HN-Fca-Gly-Gly-Tyr-Arg-OMe在乙醇溶液中的电化学性质进行了检测,并利用四肽H2N-Gly-Gly-Tyr-Arg-OMe可通过氢键与木瓜蛋白酶结合的性质,通过快速、灵敏、简单的生物电化学方法完成了其对木瓜蛋白酶的检测识别。     

超分子化合物(C12N2H9)2(C12N2H8)[SW12O40]的合成与结构表征

利用水热法合成了超分子化合物（C12N2H9）2（C12N2H8）[SW12O40],通过元素分析和X射线单晶衍射确定了其晶体结构,该晶体为正交晶系,P2（1）2（1）2（1）空间群,晶胞参数为a=12．0168（3）A^。,b=21．0534（6）A^。,c=22．5820（6）A^。,V=5713．1（3）A^。^3,α=β=γ=90°,Z=4,Dc=3．977mg·m^-3,并通过IR和XRD进行了结构表征,采用热重分析研究了晶体的热稳定性。该化合物由邻菲罗林和Keggin结构[SW12O40]^2-阴离子组成,以氢键自组装成超分子结构化合物。     

芳胺的N-烷基化反应

芳胺的N-烷基化产物在医药、染料、石油化工等许多领域具有广泛应用,合成方法众多,目前仍然为合成研究的热点方向,新的合成方法和反应机理研究报道频繁。笔者根据国内外已经工业化生产、目前已发表的研究文章、专利文献,总结了苯胺、对苯二胺等芳香胺的各种N-烷基化方法。