露采边坡渗流的有限元分析及其实例

介绍了应用有限元法求解渗流问题的原理及其实例。     

大红山铜矿岩体结构调查分析

大量工程实践已证明岩体结构是控制岩体稳定性的重要影响因素。为此，以大红山铜矿为研究背景，在选定有代表性调查地段的基础上，引入详细观测线法对其岩体结构进行了详细调查与统计。分析结果表明：调查区域内巷道岩体节理裂隙比较密集和发育，主要发育有倾向N53E、走向N37W、倾角53°，倾向W26S、走向N36W、倾角68°；倾向E1S、走向NIE、倾角89°的三组优势结构面，其中优势结构面第二组和第三组构成不稳定块体，并且断层及软弱夹层比较发育，加剧了巷道的破碎程度，对巷道围岩的稳定性有控制作用。最后提出了在巷道施工中密切注意围岩稳定性变化，避免工程事故的发生的建议。     

一种新的抖动调制方法

本文在脉冲延迟发生的基础上提供了一种用调相方法实现抖动调制的方案。该采用数字电路，与传统的调频方法比较具有易实现，精度高等优点，并为进一步开发出抖动测试集资打下了基础。     

基于Windows CE的线路巡检系统

首先讨论了现有线路巡检模式的不足，然后提出了利用windows CE来构建线路巡检系统。分析了该系统的硬件平台之后，提出了线路巡检系统的体系结构，阐述了该系统应具有的软件功能。在实际应用中表明，该系统在线路巡检中有较强的推广价值。     

用最小二乘法恢复逐行倒相副载波

介绍ＰＡＬ制彩色全电视信号中色同步信号编码原理及恢复逐行倒相副载波的过程中，两种计算色同步信号相位角的方法。并且在实验的基础上得出：最小二乘法在ＰＡＬ制电视信号的副载波相位角计算中不仅可以满足精度要求，而且简便灵活。     

声表面波脉冲编码调制振荡器

论述了一种直接式声表面波脉冲编码调制振荡器的工作原理及设计方法。实际制作了工作频率为３９４ＭＨｚ、调制频偏大于２００ｋＨｚ、调制信号码速率大于４００ｋｂｉｔ／ｓ、输出功率大于５０ｍＷ、温度稳定性优于±５０×１０－６（－２０°Ｃ～＋６０°Ｃ）的性能优良的声表面波脉冲编码调制振荡器     

声表面波可程序抽头延迟线研究

报道声表面波可程序抽头延迟线的研制情况。对该器件的总体结构，电路原理框图、声表面波可程序抽头延迟线结构作了一个扼要的概念。同时分别报道了我所研制的各类声表面波可程序抽头延迟线器件性能指标及相应的图片说明，最后对该器件仍存在的一些问题作了探讨。     

离散效应存在时孤子脉冲的增强压缩

在群速度不匹配的条件下，提出一种提高孤子脉冲压缩效应的新方法．研究表明，若使信号脉冲与泵浦脉冲存在一适当的初始延时，则不但可以提高离散效应单独存在时信号脉冲的压缩比，而且可以提高孤子脉冲的压缩质量．     

Models and observations of fcc/bcc interfaces

Whereas models of the structure and periodicity of CSL or near CSL high angle grain boundaries are relatively well developed and have been to some extent verified by experiment, the nature of more general (e.g. fcc/bcc) interfaces is very imperfectly understood. One of the major differences between homo- and heterophase boundaries is the occurrence, in the latter case, of reproducible orientation relationships due to the crystallographic requirements of phase transformation (e.g. a glissile interface for martensitic growth, low energy interfaces for classical nucleation). A review is given of the relationships commonly observed to obtain between fcc and bcc crystals (as well as ordered phases based upon these structures). Within a given relationship, it is possible to use models of the available interfaces to predict their dislocation content; the success of the various approaches is considered. It is shown that the dislocation arrays identified on fcc/bcc boundaries are consistent with the occurrence of a primary structural relaxation, but that the latter does not appear to be complete. Possible reasons for this are discussed, together with the extent to which secondary structural models may be applicable. Attempts to rationalize the observed orientation relationships and morphologies are discussed, and it is pointed out that these all rely on searches for situations of minimum primary misfit, but that the way in which the latter is quantified determines the results of the analyses. Nevertheless, the implication is that the primary misfit does appear to determine the actual behaviour, though no structural or mechanistic conclusions can safely be drawn from this observation.