Hybrid gas-to-particle conversion and chemical vapor deposition for the production of porous alumina films

Porous alumina films can be found in a wide variety of materials, including filters, thermal insulation components, dielectrics, biomedical and catalyst supports, coatings and adsorbents. Production methods for these films are as equally diverse as their applications. In this work, a hybrid process based upon chemical vapor deposition and gas-to-particle conversion is presented as an alternative technique for producing porous alumina films, with the main advantages of solvent-free, low substrate-temperature operation. In this process, nanoparticles were produced in the vapor phase by reaction of aluminum acetylacetonate in the presence of oxygen. Downstream of this reaction zone, these nanoparticles were collected via thermophoresis onto a cooled substrate, forming a porous film. Some deposited films were subjected to post-processing in the form of annealing in air. Fourier-transform infrared spectra and X-ray energy-dispersive spectroscopy analysis confirmed the production of alumina at processing temperatures above 973 K. X-Ray diffraction revealed that the films were amorphous. Film thickness, ranging from 30 to 250 μm, and the average deposition rate were determined from scanning electron microscopy results. From transmission electron microscopy, the average primary particle size was determined to be approximately 18 nm and the formation of nanoparticle aggregates was evident. Annealing of the films at temperatures ranging from 523 to 1173 K in the presence of air did not have an effect on particle size. The specific surface area of the powder composing the films ranged from 10 to 185 m² g⁻¹, as determined from nitrogen gas adsorption by the Brunauer–Emmett–Teller method.     

基于GPRS的闸门监控系统设计

利用通用分组无线电业务(GPRS)通信技术、可编程逻辑控制器(PLC)和RS-485总线设计了稳定、经济的分布式闸门监控系统。该系统采用Internet/数字数据网(DDN)和GPRS Modem方式接入无线通信网络,并根据闸门监控系统的运行特点,采用GPRS实时通信与短信服务(SMS)通信相结合的方式,不仅保证了系统通信的稳定性和平衡性,且优化了系统的运行成本。最后,对基于GPRS的闸门监控系统的经济性和适用性进行了讨论。     

Tree-Based Concurrency Control in Distributed Groupware

We present a novel algorithm, called dARB, forsolving the concurrency control problem indistributed collaborative applications. Themain issue of concurrency control is resolvingthe conflicts resulting from simultaneousactions of multiple users. The algorithmreduces the need for manual conflict resolutionby using a distributed arbitration scheme. Themain advantages of our approach are thesimplicity of use and good responsiveness, asthere are no lock mechanisms. Our algorithmrequires the applications to use a tree as theinternal data structure. This makes itapplication independent and suitable forgeneral collaborative applications. The treerequirement is reasonable since many newapplications use XML (extensible MarkupLanguage) for data representation and exchange,and parsing XML documents results in treestructures. Example applications of thealgorithm, a group text editor and acollaborative 3D virtual environment calledcWorld, are implemented and evaluated in theDISCIPLE collaboration framework. We alsointroduce awareness widgets that users avoidgenerating the conflicting events and help inmanual conflict resolution.     

Centum-CS系统组态调试及维护

简要介绍了在洛阳石油化工总厂广泛使用的日本横河公司Centum—CS控制系统的组成，着重讨论了系统组态调试经验，以及日常维护和故障的分析判断处理。     

MHD simulation of high-current subsonic vacuum arc under different distributed axial magnetic fields

Based on two-temperature magnetic hydrodynamic (MHD) model, the influence of saddle-shaped distributed axial magnetic field (AMF, linearly increases along radial position) and bell-shaped distributed AMF (linearly decreases along radial position) on plasma loss and heat flux density to anode in subsonic high-current vacuum arc (HCVA) is simulated and analyzed. According to the simulation results, the saddle-shaped AMF can more effectively inhibit plasma loss from arc column than that of bell-shaped AMF. Comparisons between simulation results and experimental results further verify the correctness of model and simulation.     

源气体流量比对F-DLC薄膜结构的影响

以高纯石墨作靶，CHF3/Ar作源气体采用反应磁控溅射法制备出了氟化类金刚石（F-DLC）薄膜。拉曼光谱表明，CHF3相对流量的增加会引起薄膜的D峰与G峰强度之比I（D）/I（G）减小，晶粒增大，芳香环结构出例下降。红外吸收光谱分析证实了这些推论，指出这是由于薄膜中氟含量上升的结果。     

Proactive resource allocation for asynchronous real-time distributed systems in the presence of processor failures

We present two proactive resource allocation algorithms, RBA^*-FT and OBA-FT, for fault-tolerant asynchronous real-time distributed systems. The algorithms consider an application model where task timeliness is specified by Jensen's benefit functions and the anticipated application workload during future time intervals is described by adaptation functions. In addition, we assume that reliability functions of processors are available a priori. Given these models, our objective is to maximize aggregate task benefit and minimize aggregate missed deadline ratio in the presence of processor failures. Since determining the optimal solution is computationally intractable, the algorithms heuristically compute sub-optimal resource allocations, but in polynomial time. Experimental results reveal that RBA^*-FT and OBA-FT outperform their non-fault-tolerant counterparts in the presence of processor failures. Furthermore, RBA^*-FT performs better than OBA-FT, although OBA-FT incurs better worst-case and amortized computational costs. Finally, we observe that both algorithms robustly withstand errors in the estimation of anticipated failures.     

燃气红外线辐射器的节能与环保特性分析

论述了燃气红外线辐射器的基本原理 ,对其节能与环保特性的分析表明 :与大气式燃烧器相比 ,红外线辐射器的燃料节约率为 15 %～ 45 % ,CO2 排放量减少率为 15 %～ 48% ,CO排放量减少率为 96.2 %～ 97.7% ,NOx 减少率为 94.9%～ 96.9% ,具有显著的节能与环保效果     

Thermal Evaluation of Scorched Graphite-Epoxy Panels by Infrared Scanning

A simple measurement system is described for evaluating damage to graphite-epoxy panels, such as those used in high-performance aircraft. The system uses a heating laser and infrared imaging system to measure thermal performance. Thermal conductivity or diffusivity is a sensitive indicator of damage in materials, allowing this thermal measurement to show various degrees of damage in graphite-epoxy composites. Our measurements track well with heat-flux damage to graphite epoxy panels. This measurement system, including analysis software, could easily be used in the field, such as on the deck of an aircraft carrier or at remote air strips.     

量子阱红外探测器能带结构的计算

利用电子波在阱与垒的界面上的反射及干涉效应，计算了量子阱红外探测器(QWIP)的能带结构，并对其适用性进行了分析和讨论。通过与K-P模型比较发现，本方法对计算较宽势阱(阱宽大于4nm)的量子阱结构的电子态适合。在垒宽和阱宽不变条件下，用两种方法计算得到的AlGaAs／GaAs量子阱材料中Al组分x与吸收峰值波长λp的关系曲线基本相同。结果说明，在较宽的范围内，本方法对QWIP能带结构的计算是适用且简便的。