提取地震信号高频信息方法的若干问题

岩性油气藏勘探已成为当代油气勘探的重要组成部分,因此提取地震资料高频信息已成为一个重要研究课题。文中对分辨率、分频处理地震信号、波阻抗反演中的一些问题进行了较深入的讨论,并得出以下认识:1要提高垂向和横向分辨率,必须设法提高野外采集地震资料的频率;2地震分频处理是偏移后提高分辨率的常用方法之一,这种方法应该限定在地震波的有效频带内,而超出有效频带,可能会带来很多假像;3低频合成地震记录中高频反射系数存在不确定性。在基于模型波阻抗反演的方法中,反演结果受初始模型的影响非常大,初始模型是依据测井资料建立的,初始模型与实际情况越接近,反演效果就越好;否则,会产生模型化的现象;4在相对波阻抗数据体(相当于地震数据体)作为约束条件下的SP测井参数协克里金插值是正演过程,消除了模型化的问题,使反演结果更接近真实情况,提高了砂层真实的分辨率。     

变换域数字水印处理技术

数字水印是信息安全领域的一项新技术,给出了相对明确的定义。着重分析了变换域数字水印系统的特征及常见攻击,给出了一些相应的对策。最后指出变换域水印的重要问题,即频率的选择问题。     

海拉尔盆地的古河道砂体识别方法

本文基于海拉尔盆地贝尔凹陷西北部高精度三维地震资料,通过对时间域、频率域地震属性的分析,研究了河道砂体的变化及分布规律,总结出了一套利用时间域、频率域地震属性识别古河道的方法。其中对河道砂体较为敏感的沿层属性主要有均方根振幅、反射强度梯度、有效带宽及瞬时频度等。利用这种识别方法在该区找到水下分流河道砂体和河口坝砂体,为该区的岩性勘探部署提供了具体目标。     

机器人腕力传感器的动态负载效应

本文从时域和频域两方面研究机器人腕力传感器在加载情况下的动态响应，进行动态建模和频谱分析，探讨负载效应的影响。     

A new adaptation of mapping method to study mixing of multiphase flows in mixers with complex geometries

The main objective of the present work is to modify the traditional mapping method for the simulation of distributive mixing of multiphase flows in geometries involving moving parts such as, internal mixers or twin-screw extruders without a limitation on their geometrical periodicity. The periodicity condition, limits the results of traditional mapping method to tracking mapping mesh between specific discrete time intervals or distances for that geometry is repeated, hence, result is only for fixed orientation of rotors. Imaginary domain method is introduced to track mapping mesh from one state to the next free of geometrical periodicity limitations. In this work the method is introduced and its applicability and accuracy is discussed in details. A two-dimensional (2D) simulation of mixing of two Newtonian fluids with different viscosities in an intermeshing internal mixer is used as a test case study. In this example the key issues of ability to predict mixing state in details for all orientations of rotors is presented. To reduce diffusion errors of mapping method in the boundaries of the rotors, mapping mesh refinement technique that relies upon one single reference mesh is also presented.     

Automating application software generation

Many approaches have been proposed to enhance software productivity and reliability. These approaches typically fall into three categories: the engineering approach, the formal approach and the knowledge-based approach. But the optimal gain in software productivity cannot be obtained if one relies on only one of these approaches. This paper describes the work in knowledge-based software engineering conducted by the authors for the past 10 years. The final goal of the research is to develop a paradigm for software engineering which integrates the three approaches mentioned above. A knowledge-based tool which can support the whole process of software development is provided in this paper.     

On strategies for enforcing interfacial constraints and evaluating jump conditions with the extended finite element method

We consider a problem stemming from recent models of phase transitions in stimulus‐responsive hydrogels, wherein a sharp interface separates swelled and collapsed phases. Extended finite element methods that approximate the local solution with an enriched basis such that the mesh need not explicitly ‘fit’ the interface geometry are emphasized. Attention is focused on the weak enforcement of the normal configurational force balance and various options for evaluating the jump in the normal component of the solute flux at the interface. We show that as the reciprocal interfacial mobility vanishes, it plays the role of a penalty parameter enforcing a pure Dirichlet constraint, eventually triggering oscillations in the interfacial velocity. We also examine alternative formulations employing a Lagrange multiplier to enforce this constraint. It is shown that the most convenient choice of basis for the Lagrange multiplier results in oscillations in the multiplier field and a decrease in accuracy and rate of convergence in local error norms, suggesting a lack of stability in the discrete formulation. Under such conditions, neither the direct evaluation of the gradient of the approximation at the phase interface nor the interpretation of the Lagrange multiplier field provide a robust means to obtain the jump in the normal component of solute flux. Fortunately, the adaptation and use of local, domain‐integral methodologies considerably improves the flux evaluations. Several example problems are presented to compare and contrast the various techniques and methods. Copyright © 2004 John Wiley & Sons, Ltd.     

柴油机低频排气噪声规律分析

针对柴油机（4－85）低频排气噪声，对其产生机理、规律及其影响因素等作了理论计算、分析及实验。对低频排气噪声信号进行频域分析后可知，其主要由一系列离散的谐波组成，是以柴油机点火频率为基频的一种类周期性噪声，有可能应用有源噪声控制技术。     

On the ontological expressiveness of information systems analysis and design grammars

Abstract. Information systems analysis and design (ISAD) methodologies provide facilities for describing existing or conceived real-world systems. These facilities are ontologically expressive if they are capable of describing all real-world phenomena completely and clearly. In this paper we formally examine the notion of the ontological expressiveness of a grammar and discuss some of its implications for the design and use of ISAD methodologies. We identify some generic ways in which ontological expressiveness may be undermined in a grammar and some potential consequences of these violations. We also examine ontological expressiveness within the context of some other desirable features that might be considered in the design of ISAD methodologies.