无功功率的补偿方法

介绍采用同步电动机和并联电容器进行无功补偿等常用的无功功率补偿方法，以提高用电设备的功率因数。     

高炉鼓风机电气控制技术改造

对高炉鼓风机事故原因分析发现，低电压保护动作、二次控制电源断电、电网电压突降是造成风机自动跳闸的主要原因。对风机电气控制技术进行改进，采取了去掉低电压跳闸保护、增设专用二次控制电源、设置瞬时断电延时自启动控制线路等措施，有效地避免了风机故障的发生，年减少经济损失66．13万元。     

基于B点磁探针膛内电枢电弧长度与速度分布测量的计算机控制系统的研究

基于B点磁探针的测量原理，建立了电磁轨道炮膛内三维等离子体电枢电弧长度和电弧运动速度测量的数学模型，通过对该模型的分析给出了用于测量膛内电枢电弧长度和运动速度分布的相应推论。开发了用于测量膛内等离子体电枢电弧长度和速度的多通道计算机控制诊断系统，并进行了相应的试验研究。     

百色水库和龙滩水库淹没土地补偿概算单价比较

通过对百色水利枢纽和龙滩水电站土地补偿概算单价进行比较分析,找出控制土地补偿的关键因素,对 制定广西实施《大中型水利水电工程征地补偿和移民安置条例》办法和编制两工程调整概算,提供参考。     

Electrical conductivity in iodine-doped ethyl cellulose

The electrical conductivity of solution-grown ethyl cellulose (EC) films, 5–30 μm thick, has been studied in the sandwich configuration (metal–EC–metal) as a function of iodine concentration from 0.5 to 5.0 wt% ratio. The studies were conducted in the temperature range 333–383 K, while the field was varied over the range (3.0–5.5) × 10⁴V/cm. Aluminium was used as the lower electrode, while the upper electrode was of Al, Ag, Cu, Au or Sn. Certain transient effects such as a large burst of current immediately after the application of field were observed. An attempt was made to identify the nature of the current by comparing the observed dependence on electric field, electrode material and temperature with the respective characteristic features of the existing theories of electrical conduction. The results show that the electrical conduction follows Ohm's law at lower fields, while at higher fields, space-charge limited current (SCLC) was observed. It was also found that Richardson–Schottky emission was responsible, to some extent, for the transport of charge carriers in the polymer. The conductivity of the films increased on doping with iodine. The dopant molecules are considered to act as additional trapping centes and provide links between the polymer molecules in the amorphous region, thus resulting in the formation of charge transfer complexes.     

Procedures for analysis of strain transfer in the acetabular region in vitro

The failure of acetabular cups via loosening, migration or fracture is partially related to the stress distribution existing in the acetabular region. The complexity of the investigation of these stresses demands the application of a variety of model testing techniques involving combined embedded strain gauging, finite element analysis, transmission and reflective photoelasticity and crack propagation studies. The application of these procedures are described and the difficulties of obtaining representative loadings and restraints are commented upon.     

WXJB—E型多点温度监测报警仪的研制

本文介绍了 WXJB—E 型多点温度监测报警仪的设计思想、基本原理、技术关键、技术指标及其功能。     

High‐Tech‐Cellulose‐Funktionspolymere nach dem ALCERU®‐Verfahren

Functional High‐Tech‐Cellulose materials by the ALCERU® process Cellulose is one of the eldest materials of mankind. While the use of cellulose in former times was focused on application as a more construction or as a more textile material at present time the application profile turns to a more functional material using the ALCERU® process. Shaping of pure cellulose dissolution in NMMNO permits the manufacturing of materials for upholstery, filtration or biodegradable film strips having an uniform cross section. Fibreds, which can be applied in several packaging materials, are available using different techniques for regeneration cellulose. A great field of innovative functional cellulose materials is opened up by addition of several functional additives to cellulose dissolution. In this way piezo‐electrical conductive cellulose fibres (PZT) or high‐temperature filtration membranes are to be generated if one adds special types of ceramic powders. Above all PZT green fibres are applied in more recent uses as sensors or actuators. Electrically conductive cellulose fibres or filaments, which can be also used in the textile chain, can be prepared adding conductive carbon black to a cellulose dope on the same way, too. Cellulose material having adapted conductivity to different application is available by adding an exact defined amount of carbon black to cellulose dissolution. Finally cellulose beads can be manufactured by means of varied shaping technique. The beads are showing variable particle sizes and narrow pore size distribution. These properties open up very interesting application in the field of human blood purification or chromatography.     

基于电容测量和PCA法的两相流相浓度检测方法

介绍利用电容层析成像系统阵列传感器结构和采样特点,引入主成分分析法(PCA)求取两相流相浓度的新方法.对大量测量值样本进行统计分析后,求出用测量值第一主成分求取相浓度的经验公式,仿真及静态实验表明:两者之间有着良好的对应关系,其测量结果不受两相流流型的影响,是一种有较好应用前景的测量方法.     

应变式压力传感器特性补偿和应用

讨论了用动态补偿数字滤器对应变压力传感器的动态特性进行补偿，使之提高测量精度并能用于爆炸冲击波测量的一种方法。实验结果与经验值比较，补偿前．后对比、测量精度有明显提高，说明在一定条件在变式测压系统也可用于爆压的测试。