两轴稳定平台大俯仰角状态控制技术研究

在对两轴稳定平台一般构型分析的基础上,指出了其在俯仰方向大角度时稳定控制存在的不足,提出了采用三正交陀螺稳定控制方式解决大俯仰角控制问题的方法,最后利用MATLAB进行了数学仿真,结果表明该方法有效提高了系统的稳定精度。     

CCUS in a net-zero U.S. power sector: Policy design,rates, and project finance

Carbon capture utilization and storage is an important technology option to rapidly and profoundly decarbonize the power sector, but will not deploy without substantial incentives or regulation. Assessment of U.S. policy options reveals that current incentives only partially close the finance gap and are most sensitive to fuel type and ownership structure. Recent proposed legislation would in some designs attract private investment for many projects, leading to widespread deployment of CCUS in the power sector. Additional constraints and concerns (including technology options and presence of CO₂ infrastructure) could play an important secondary role. This study discusses the specific US incentive policies that can provide investors and lenders with net cash flows that are adequate to attract private capital to CCUS power projects in the US.     

模块化多电平变换器全桥型子模块优化均压控制方法

模块化多电平变换器(MMC)子模块(SM)的数量与直流侧电压成正比,当SM增加时,会导致MMC的开关损耗急剧增加,因此降低功率器件的开关频率一直是MMC的重要研究方向之一。采用最近电平逼近调制(NLM)方式,提出一种基于全桥型SM的改进均压排序法,旨在降低MMC中功率器件IGBT的开关频率,该方法实现相对简单,无需额外的控制器,且易于扩展。最后,通过在MATLAB/Simulink平台搭建了19个全桥SM的仿真模型,验证了该方法的有效性。验证了所提全桥型SM优化均压策略,可以有效避免IGBT不必要的反复投切,降低IGBT的开关损耗,同时对外部输出特性不会产生负面影响。     

考虑寄生参数的隔离型双有源桥DC-DC变换器的开关开路故障分析与容错控制策略

双有源桥(DAB)DC-DC变换器开关管的驱动电路故障导致开关开路故障(OCSF),这使得DAB系统拓扑对称性缺失、高频电压和电流发生畸变和直流偏置,进而对系统的可靠性和长期运行稳定性造成不良影响.对此,研究DAB开关管和高频变压器寄生参数对OCSF后系统运行状态的影响,以完善DAB故障分析体系.针对OCSF问题,提出一种基于对称拓扑和对偶原理的故障容错策略,通过闭锁开关使系统运行拓扑恢复对称,并在此基础上提出一种不改变控制器参数、只需改变控制器输出饱和参数的实用控制方法,并在理论上讨论了该方法的可行性.最后,通过实验验证了OCSF模态分析及所提容错控制策略的正确性.     

应变速率对Q460连铸坯高温力学性能的影响

摘要：采用Gleeble-3500热模拟试验机和金相法测试了不同应变速率下建筑用钢Q460连铸坯的高温力学性能,获得了600~1200℃范围内Q460连铸坯的高温强度、热塑性和最终室温组织随拉伸温度和应变速率的变化规律。结果表明,当Q460连铸坯在较高的应变速率（10s-1）下进行高温拉伸时,试样的断面收缩率随着拉伸温度的升高而升高,没有出现高温脆性区;在较低的应变速率（10-3s-1）下进行高温拉伸时,试样的断面收缩率出现了2个脆性区,第1个在1100℃至熔点温度,第2个脆性区间在700℃附近。总体来说,实验钢种的高温断面收缩率均大于65%,表明建筑用钢Q460连铸坯具有较好的高温热塑性。此外,同一应变速率下,Q460连铸坯的抗拉强度随着拉伸温度的升高而降低,而伸长率随着拉伸温度的升高而升高。     

气相色谱法测定石脑油中含氧化合物含量

本文论述了利用气相色谱法检测石脑油中含氧化合物的方法,考察了无阀切换技术、分离模式的设计、操作条件的优化等方面的问题。提出利用多维气相色谱法,采用一根非极性柱和一根极性柱进行独立和串联分离,通过改变辅助载气压力的无阀切换方式进行柱分离,应用双FID检测器进行信号检测,数据利用Agilent的chemestation工作站采集和输出。该方法操作简单,分析时间在23 min以内,重复测定结果的相对标准偏差(RSD)小于1.5%,标准加入回收率在95～105%范围内,方法准确可靠。     

SOME PROPERTIES OF THE MAXIMUM LIKELIHOOD ESTIMATOR IN THE SIMULTANEOUS SWITCHING AUTOREGRESSIVE MODEL

Abstract. The simultaneous switching autoregressive (SSAR) model proposed by Kunitomo and Sato (A non-linearity in economic time series and disequilibrium econometric models. In Theory and Application of Mathematical Statistics (ed. A. Takemura). Tokyo:University of Tokyo Press (in Japanese), 1994; Asymmetry in economic time series and simultaneous switching autoregressive model. Struct. Change Econ. Dyn. , forthcoming (1994).) is a Markovian non-linear time series model. We investigate the finite sample as well as the asymptotic properties of the least squares estimator and the maximum likelihood (ML) estimator. Due to a specific simultaneity involved in the SSAR model, the least squares estimator is badly biased. However, the ML estimator under the assumption of Gaussian disturbances gives reasonable estimates.     

一种多接口多信道VANET动态信道分配算法研究

为了合理地实现多接口多信道车载自组织网络（VANET）车辆节点间通信信道的动态分配,提出了一种基于通信双方车辆节点信道切换队列的动态信道分配算法。定义了车辆节点的射频接口状态,给出了信道的性能因子以及信道切换队列的生成方法,通过综合考虑通信双方车辆节点的射频接口状态和信道切换队列,快速自主地建立通信链路,从而解决了信道公平接入和分配不合理的问题。通过软件仿真比较可以看出,该算法实现了信道的动态分配,减小了平均端到端时延,增加了网络平均吞吐量,显著提高了多接口多信道VANET的网络性能。     

基于异步切换多胞系统的网络化飞行器故障检测

本文研究了存在时变短时延和随机丢包的大包线网络化飞行器故障检测问题.首先,采用切换多胞系统描述飞行动态,并提出了一种局部重叠多胞划分方式以较低设计保守性.然后,借助泰勒级数展开和伯努利分布将时延和丢包转化为多胞系统参数,并构建了切换参数依赖故障检测滤波器.同时,考虑滤波器切换指令及多胞加权参数更新滞后引起的异步切换问题,基于切换参数依赖Lyapunov函数和平均驻留时间方法分析了系统的稳定性和l2性能,并以LMI形式给出了滤波器存在的充分条件.最后,以HiMAT(highly maneuverable technology)飞行器为例验证了所提方法的有效性.     

Joint Determination of the State Dimension and Autoregressive Order for Models with Markov Regime Switching

Abstract. This paper is concerned with the problem of joint determination of the state dimension and autoregressive order of models with Markov‐switching parameters. A model selection procedure is proposed which is based on optimization of complexity‐penalized likelihood criteria. The efficacy of the procedure is evaluated by means of Monte Carlo experiments.