Multilevel microwave design optimization with automated model fidelity adjustment

A computationally efficient algorithm for electromagnetic (EM)‐simulation‐driven design optimization of microwave structures is proposed. Our technique exploits variable‐fidelity EM simulations and the multilevel design approach where an approximate optimum of the lower accuracy but faster EM model of the structure under design is used as a starting point for optimizing a more accurate model. Several enhancements of the basic multifidelity method are introduced, including an efficient algorithm of optimizing EM models that is based on local response surface approximations, as well as automated adjustment of model fidelity. Convergence of the procedure to the optimum design is ensured by defaulting to the higher fidelity model whenever the prediction given by the lower fidelity fails to improve the design. Distribution of the computational effort between the models of different fidelity allows for making larger steps in the design space at a low cost, as well as substantial reduction of the number of high‐fidelity model evaluations, because the high‐fidelity model is only referred to in the last design stage. The article provides comprehensive numerical verification of our technique. Substantial computational savings are demonstrated in comparison to the benchmark methods: over 40% on average as compared to a basic version of the multifidelity optimization approach and over 95% as compared to direct optimization of the high‐fidelity model. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:281–288, 2014.     

无线通信基站建设中电磁辐射缓解技术应用实践

无线通信基站电磁辐射缓解技术包括增加发射天线架设高度、增加天线增益、降低发射器功率、减小VRP下倾角度和改变垂直辐射图VRP等。结合案例分析了无线通信基站建设过程中电磁辐射缓解技术的应用实践。     

On the ‘curiosity’ of electrical self‐heating,static charge and electromagnetic shielding effectiveness from carbon black/aluminium flakes reinforced epoxy‐resin composites

This paper shows the wide application range (such as electrical self‐heating and electromagnetic shielding effectiveness) of composites consisting of conductive carbon black/aluminum flakes (CBA) filler and epoxy insulative matrix. The effect of CBA content on the network structure of epoxy matrix was investigated in detail. Static electrical conductivity increases linearly with the increase of filler concentration at the interface in epoxy composites. The large decrease of the conductivity as a function of the temperature is analyzed in terms of the negative temperature coefficient of conductivity (NTCC) effect. The influence of viscosity, surface energy and barrier highest energy on the NTCC behaviour in the composite is also considered. Based on these results, a new interpretation is proposed to explain the NTCC phenomena by computing the swelling force among conductive phases. The correlations of conductivity during the temperature cycling and activation energy were analyzed. The effects of dynamic ageing at various temperatures on the resistivity are reported. Current–voltage–temperature characteristics for epoxy with different contents of CBA were examined in detail. A model based on the law of energy conservation is proposed to calculate the specific heat and amount of heat dissipation. The static charge of the epoxy–CBA composites was estimated. The correlation between electromagnetic wave‐shielding effectiveness (EMS), conductivity and frequency of epoxy composites with different filler contents is also discussed. Furthermore, the effect of annealing on EMS of epoxy composites was examined. © 2002 Society of Chemical Industry     

基于扩展光学模型的电磁信号传播系统设计与实现

电磁信号传播系统的建模在复杂环境下有十分重要的意义,并且对模拟系统的准确性和快速性有一定的要求。本文基于扩展光学模型,以Java为平台开发语言,以射线追踪为核心算法,实现基于扩展光学模型的电磁信号传播系统的设计。通过与AREPS(高级折射效应预测系统)比较,证明本系统建模的准确性和很快的速度响应。     

工业控制系统中可靠性设计的研究

本文主要阐述了在工业生产控制系统中,可靠性设计中的热设计、电磁防护设计、机械防震设计,提出了可靠性设计中应当注意的问题,以及一些解决问题的方案和办法.热设计中应当主要注意温度,电磁防护设计中应当主要注意屏蔽和接地,机械防震设计中应当主要注意防震.     

电热化学炮膛压测试系统的电磁兼容设计

由于电热化学炮发射时存在强电磁干扰和地电位浮动,膛压测试系统的测试准确性和仪器的安全性均受到了严重的影响。针对这一问题,根据恶劣条件下的动态测试理论,利用PCB的电磁兼容技术,不同材料多层组合的屏蔽技术,接地技术,滤波技术以及光电隔离技术,完成了基于电热化学炮膛压测试系统的电磁兼容设计。并通过试验验证了这种设计能有效解决电磁干扰问题,确保获得可靠的膛压数据,对分析电热化学炮结构的合理性,炮架的强度和刚度设计等有重要意义。     

Development of a high‐resolution RGBW flexible display using a white organic light‐emitting diode with microcavity structure and that of a side‐roll touch panel

In this study, white organic electroluminescent devices with microcavity structures were developed. A flexible high‐resolution active‐matrix organic light‐emitting diode display with low power consumption using red, green, blue, and white sub‐pixels formed by a color‐filter method was fabricated. In addition, a side‐roll touch display was developed in combination with a capacitive flexible touch screen.     

Dynamic Compressibility of Carbamide at Low Pressures

The shock adiabats of pressed carbamide samples with a density of 1.29 g/cm³ and carbamide samples with a bulk density of 0.78 g/cm³ were studied at pressures of 1–14 GPa using an electromagnetic method. In the coordinates D and U, the shock adiabat of pressed carbamide is linear and the shock adiabat of carbamide of bulk density at a pressure of 2.4 GPa is represented as two linear segments: D = 2U at 0.6 < U <1.3 km/sec and D = 0.6 + 1.55U at 1.3 <U < 2.8 km/sec. The possibility of a phase transition in carbamide under shock compression is discussed.     

引水隧洞复杂地质段地质超前预报综合评价

由于单一地质超前预报方法对复杂地质段预报的局限性,本文则主要通过地质编录法、瞬变电磁法、水平声波反射法三种方法的综合分析,避开各种方法局限性的影响,完成对复杂地质段的超前预报,同时成功预报一个次生断层以及该断层影响带宽度,并给施工提供合理建议,使得施工顺利进行。预报结果与实际开挖地质情况基本一致,取得了显著效果。因此,在面对复杂地质段时,应用地质编录法、瞬变电磁法、水平声波反射法综合评价地质情况,获取准确、可靠的地质超前预报结果,是一种高效、可行的组合方法之一。     

基于多智能体技术的反辐射导弹作战效能评估建模研究

分析了机载反辐射导弹的作战流程;建立了基于多智能体技术的复杂电磁环境下反辐射导弹作战效能评估模型框架;研究了基于Bayesian网的反辐射导弹作战效能评估模型。提出的建模方法对其他复杂装备系统作战效能评估研究具有参考作用。