Morphologies and microstructures of tree-like carbon produced at different reaction conditions in a CVD process

Centimeter-size multi-branched tree-like carbon structures have been generated by the catalytic chemical vapor deposition of toluene using ferrocene as the catalyst precursor and investigated by means of SEM, TEM, and EDX. It is found that a temperature of 1000-1200 °C and a carrier gas flow rate of 1000-2500 ml/min are necessary for the generation of the carbon trees. Their morphologies and microstructures change greatly with the changing reaction conditions. The fractal dimensions of the trees are calculated to quantitatively investigate the influence of different reaction temperatures on the morphologies.     

Dynamic output feedback control of a flexible air-breathing hypersonic vehicle via T–S fuzzy approach

By utilising Takagi–Sugeno (T–S) fuzzy set approach, this paper addresses the robust H_∞ dynamic output feedback control for the non-linear longitudinal model of flexible air-breathing hypersonic vehicles (FAHVs). The flight control of FAHVs is highly challenging due to the unique dynamic characteristics, and the intricate couplings between the engine and fight dynamics and external disturbance. Because of the dynamics’ enormous complexity, currently, only the longitudinal dynamics models of FAHVs have been used for controller design. In this work, T–S fuzzy modelling technique is utilised to approach the non-linear dynamics of FAHVs, then a fuzzy model is developed for the output tracking problem of FAHVs. The fuzzy model contains parameter uncertainties and disturbance, which can approach the non-linear dynamics of FAHVs more exactly. The flexible models of FAHVs are difficult to measure because of the complex dynamics and the strong couplings, thus a full-order dynamic output feedback controller is designed for the fuzzy model. A robust H_∞ controller is designed for the obtained closed-loop system. By utilising the Lyapunov functional approach, sufficient solvability conditions for such controllers are established in terms of linear matrix inequalities. Finally, the effectiveness of the proposed T–S fuzzy dynamic output feedback control method is demonstrated by numerical simulations.     

Synthesis of carbon nanocapsules containing Fe, Ni or Co by arc discharge in aqueous solution

A simple, inexpensive and one-step synthesis method of metal-containing carbon nanocapsules using an arc discharge in aqueous solution is reported. It was found that Ni, Co and Fe nanoparticles could be in situ encapsulated in carbon shells when the arc was performed respectively in aqueous solutions of NiSO₄, CoSO₄ and FeSO₄. Transmission electron microscopy, energy dispersive X-ray spectroscopy and electron diffraction patterns of selected areas were used to determine the crystalline phase of the metal cores. To explain the formation mechanism of metal-containing carbon nanocapsules, a model of discharge in solution is proposed. This result presents a simply controllable way to synthesize metal-containing carbon nanocapsules.     

Scrolls and nested tubes in multiwall carbon nanotubes

Recent high-resolution transmission electron microscopy (HREM) studies of multiwalled carbon nanotubes (MWCNTs) reveal a class of defects analogous to edge dislocations in a crystal. These defects are believed to mark the transition from scrolls on one side to nested tubes on the other. On the tube side, layer spacing becomes irregular. Analysis of the helicity of the tubes shows a strong correlation between diameter and helicity. This suggests that the organizing principle for the tubes is not Van der Waals forces, as in the case of graphite or turbostratic carbon, but preservation of helicity. Based on these observations and total energy calculations, the authors speculate that graphene monolayers initially form scrolls and subsequently transform into multiwall nanotubes through the progression of defects. Scrolls and nested tubes thus coexist within a single MWNT.     

Influence of untreated and novel electron‐beam‐modified surface‐coated silica filler on the thermorheological properties of ethylene–octene copolymer

We developed surface‐modified silica fillers by coating these with an acrylate monomer, trimethylolpropane triacrylate, or a silane coupling agent, triethoxyvinyl silane, followed by electron‐beam irradiation at room temperature. These were incorporated in an ethylene–octene copolymer rubber. Thermorheological studies of the unvulcanized ethylene–octene copolymer and its untreated and modified silica‐filled composites were done with a shear dynamic oscillating rheometer. Modification of the silica filler, especially via the silanization process followed by electron beam treatment, significantly reduced filler–filler networking as revealed from the log–log plots of storage modulus and complex shear viscosity, and its real component. The rheological complexity of the compositions was analyzed from a double logarithmic plot of the storage modulus and loss modulus. The results obtained from the master curves constructed on the basis of the time–temperature superposition principle and the activation energy calculated from the Arrhenius equation for the flow of above these compounds further supported these findings. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2453–2459, 2003     

Effects of oxidation on I2 doping of trans-polyacetylene as studied via e.s.r. and conductivity measurements

Oxidation of trans-polyacetylene lowers the activation energy for conduction from 16 kcal mol^?1 to 11 kcal mol^?1 for oxidation levels of (C₂H₂O_n)_x, n = 0.144, 0.207 and 0.550. Maximum conductivity levels for 0 < x < 0.144 doped with I₂ were almost identical. At long I₂ doping times all samples exhibited some loss of conductivity. E.s.r. experiments indicate that: (1) linewidth is directly proportional to oxygen content, and (2) iodine doping is not diffusion controlled. All data are consistent with a molecular picture of PAC consisting of highly reactive localized spin states that are selectively oxidized, and less reactive delocalized states that affect conductivity more strongly via doping.     

A growth mark method for studying growth mechanism of carbon nanotube arrays

A novel and simple growth mark method was developed to make marks during the growth process of carbon nanotube arrays. These marks can be read out under scanning electron microscope or optical microscope. Based on this method, the growth rates at different temperatures and under different acetylene partial pressures were measured, from which the activation energy and the order of reaction were determined. Based on our experimental results, the growth of carbon nanotube arrays in our experimental condition could not be diffusion-limited. The measured activation energy could possibly be attributed to the heterogeneous decomposition of acetylene over the catalyst particle. Furthermore the marked array with special segmental structure may be found some applications in the future.     

Influence of Zn ion implantation on structures and field emission properties of multi-walled carbon nanotube arrays

The structures and field emission properties of multi-walled carbon nanotube arrays implanted with Zn+ by MEVVA ion implanter have been investigated.The results revealed that Zn+implantation induced structural damage and that the top of carbon nanotubes with multi-layered graphite structure were transformed into carbon nanowires with amorphous structure.Meanwhile,C:Zn solid solution was synthesized after Zn+ implantation.The turn-on field and threshold field were 0.80 and 1.31 V/μm,respectively for original...     

Preparation of highly crystalline nanofibers on Fe and Fe-Ni catalysts with a variety of graphene plane alignments

The present study confirmed that highly crystalline nanofibers with controlled structure may be prepared over Fe and Fe-Ni alloy catalysts. The degree of graphitization of various carbon nanofibers (CNFs) was analyzed by using C(0 0 2) peaks from the XRD profiles. The C(0 0 2) peaks of CNFs over Fe catalyst shifted to higher angle and became narrower as the preparation temperature increased from 560 to 620 °C. Tubular CNFs prepared at temperature higher than 630 °C showed lower 2θ angles compared to those of platelet fibers. CNFs prepared over Fe-Ni catalysts tended to resemble those prepared over Fe catalysts. The degree of graphitization of platelet CNFs resembled natural graphite, while d_0 0 2 of the tubular CNFs showed values below the 3.39 Å reported as a theoretical minimum for a cylindrical alignment. Lc_0 0 2 of platelet and tubular CNFs increased by heat treatment at 2000 and 2800 °C though d_0 0 2 changed little. A transverse section of platelet and tubular CNFs had a hexagonal shape, not a round shape. The hexagonal column allows AB stacking of hexagonal planes that can give perfect hexagonal alignment.