乙烯氧化制环氧乙烷固定床反应器的模拟及稳定性分析

在筛选出合适的乙烯氧化制环氧乙烷动力学方程的基础上,对工业固定床氧化反应器进行一维和二维模型的模拟计算。考察操作工艺参数对反应器稳定性、转化率影响的敏感性以及N_2和CH_4做致稳气时反应温度和转化率的轴向、径向分布。     

Thermal Stability of Some Metabolically Conjugated Potential Precursors of Flavor Components in Meat and Milk

The stability of selected metabolic conjugates (phenylphosphate, phenylglucuronide, naphthylglucuronide, and naphthylsulfate) was evaluated in model systems. Phenylphosphate was less stable than the glucuronides and the sulfate, especially under neutral (pH 6.8) and acidic conditions (pH 1.5). Phenylphosphate was completely degraded after 1.7 hr at 100°C, and after 0.3 hr at 150°C at pH 6.8. The glucuronide and sulfate conjugates were especially stable under neutral conditions (pH 6.8) requiring > 5 hr for complete hydrolysis at 100°C. All conjugates were quite stable to hydrolysis under alkaline conditions (pH 11). The presence of certain organic solvents (ethyl acetate or ethyl ether) caused rapid hydrolysis of conjugates under very mild conditions (40°C for 30 min). This information may improve under-standing of flavor production from animal products.     

NUMERICAL MODEL FOR DYNAMIC SIMULATION OF TRAFFIC FLOW

ＮＵＭＥＲＩＣＡＬＭＯＤＥＬＦＯＲＤＹＮＡＭＩＣＳＩＭＵＬＡＴＩＯＮＯＦＴＲＡＦＦＩＣＦＬＯＷＷｕＺｈｅｎｇ；ＺｅｎｇＬｉ－ｎｏｎｇ（ＤｅｐａｒｔｍｅｎｔＡｐｐｌｉｅｄＭｅｃｈａｎｉｃｓ，ＦｕｄａｎＵｎｉｖｅｒｓｉｔｙ，Ｓｈａｇｈａｉ２００４３３，Ｐ...     

The As-prepared surfaces of C-axis-oriented Nd1Ba2Cu3Oy thin films characterized using scanning probe microscopes

Recently, superconducting Nd₁Ba₂Cu₃O_y (Ndl23) thin films with high superconducting transition temperature (T _c) have been successfully fabricated at our institute employing the standard laser ablation method. In this paper, we report the results of surface characterization of the Nd123 thin films using an ultrahigh vacuum scanning tunneling microscope/spectroscopy (UHV-STM/STS) and an atomic force microscope (AFM) system operated in air. Clear spiral pattern is observed on the surfaces of Nd123 thin films by STM and AFM, suggesting that films are formed by two-dimensional island growth mode. Contour plots of the spirals show that the step heights of the spirals are not always the integer or half-integer number of thec-axis parameter of the structure. This implies that the surface natural termination layer of the films may not be unique. This result is supported byI-V STS measurements. The surface morphology of the Nd123 thin films is compared with that of thec-axis-oriented Y₁Ba₂Cu₃S_y thin films. Surface atomic images of the as-prepared Nd123 thin films are obtained employing both STM and AFM. STS measurements show that most of the surfaces are semiconductive. The results of STS measurements together with the fact that we are able to see the surface atomic images using scanning probe microscopes suggest that exposure to air does not cause serious degradation to the as-prepared surfaces of Nd123 thin films.     

Numerical solution of the kinematic dynamo problem for Beltrami flows in a sphere

The article discusses computational aspects of the kinematic problem of magnetic field generation by a Beltrami flow in a sphere. Galerkin's method is applied with a functional basis consisting of Laplace operator eigenfunctions. Dominant eigenvalues of the magnetic induction operator and associated magnetic eigenmodes are obtained numerically for a certain Beltrami flow for magnetic Reynolds numbers up to 100. The eigenvalue problem is solved by a highly optimized iterative procedure, which is quite general and can be applied to numerical treatment of arbitrary linear stability problems.     

Study on combustion characteristics of blended coals

Power plants in China have to burn blended coal instead of one specific coal for a variety of reasons. So it is of great necessity to investigate the combustion of blended coals. Using a test rig with a capacity of 640 MJ/h with an absolute milling system and flue gas online analysis system, characteristics such as burnout, slag, and pollution of some blended coals were investigated. The ratio of coke and slag as a method of distinguishing coal slagging characteristic was introduced. The results show that the blending of coal has some effect on NO _x but there is no obvious rule. SO _x emission can be reduced by blending low sulfur coal. Translated from Proceedings of the CSEE, 2005, 25(18): 97–103 [译自: 中国电机工程学报]     

有机盐聚合醇氯化钾钻井液的应用

霍尔果斯背斜构造极其复杂,内应力极高,地层倾角大,断层、破碎带多,并存在高低压互层;安集海河组的灰绿色软泥岩水化严重并具有粘弹塑性.该区块重点探井霍003井三开、四开井段选用有机盐聚合醇氯化钾钻井液,同时为保证钻井液在高密度下（2.55 g/cm^3）具有好的流变性,使用活化铁矿粉、活化重晶石加重.应用结果表明,由于采用了强抑制和多元封堵的措施,该钻井液具有良好的流变性和较强的携带能力,钻进中曾携带出重2.8 kg和5.1kg的大掉块;滤失量低,泥饼质量好,封堵能力强,造壁能力强,减轻了井下阻卡程度;有良好的储层保护能力;在室内研究的基础上,经过现场合理使用和维护钻井液,霍003井提高了机械钻速,缩短了钻井周期,井身质量优于邻井.指出在高密度下,未选出适合有机盐聚合醇氯化钾钻井液的稀释剂,钻井液流动性较差.     

鸭池河水电站压力钢管外压稳定性设计

采用解析法和半解析有限元法分别对鸭池河水电站埋藏式加劲压力钢管进行外压稳定性计算。在计算分析过程中,考虑了初始缺陷因素对埋藏式加劲压力钢管抗外压稳定性的影响,使得计算结果更加接近于工程实际;从而为埋藏式加劲压力钢管的外压稳定性计算提出了一种更加行之有效的方法。     

Effects of various post-treatments on carbon nanotube films for reliable field emission

In this report, the FE characteristics of carbon nanotubes (CNTs) treated using both thermal annealing and mechanical coatings on the as-grown CNTs systematically studied. It was found that in the high temperature annealed samples, CNTs were attacked at its root during annealing due to a small amount of oxygen, and were pulled out of the substrate in places after FE measurements because of the contact resistance. However, for the mechanically coated samples both with spin on glass (SOG) and polymethyl methacrylate (PMMA), CNTs were found to be nearly intact after FE measurements and showed reliable FE characteristics over repeatable voltage scan. The reliability of CNTs during FE could be owing to the strong adhesion of CNTs to the substrate both by SOG and PMMA coatings.     

环保中/高密度纤维板生产成本与性能问题 系统解决方案的研究(Ⅲ)

使用永港·伟方UF-1改性剂制备的改性脲醛胶粘剂生产E1级中纤板,胶粘剂生产成本降低10%,板材的各项力学性能均能达到国家标准,甲醛释放量达到了E1级标准,具有推广价值。