使用地热能的吸收式制冷系统

吸收式制冷系统可以利用低品位的热源来制冷，相对于常见的蒸汽压缩式制冷系统而言在这方面具有优势。我国是一个地热资源很丰富的国家，为了充分利用这一资源，我们有必要对以地热为热源的吸收式制冷系统进行研究。本文着重分析了使用地热资源的溴化锂吸收式制冷系统。     

谈合理布局我国铝工业问题

文章分析了我国铝工业特别是电解铝工业布局的变化及其总布局战略思考的转变过程,并从铝工业特别是电解铝工业与合理开发利用我国能源资源 合理的铝工业链以及环保等方面的关系,论述了我国迫切需要统一思想,制定出一个科学合理的铝工业总体布局产业政策以及能保证其能正确实施的经济、法律手段。     

罗坡坝水电站泄水建筑物设计及试验研究

罗坡坝水电站拱坝设置有三个溢流表孔,中间孔高程低于两侧的孔,三个泄水孔设有差动式挑坎。通过模型试验表明,不发生危及岸坡稳定的泄流雾化问题,此外,适当控制泄流水舌射程可以减少坝下冲坑深度,消能效果良好。     

Repetition Blindness Occurs in Nonwords.

Theorists have predicted that repetition blindness (RB) should be absent for nonwords because they do not activate preexisting mental types. The authors hypothesized that RB would be observed for nonwords because RB can occur at a sublexical level. Four experiments showed that RB is observed for word-nonword pairs (noon noof), orthographically similar nonwords (glome glame), and identical repetitions (plass plass). More RB was found for words than for nonwords. Prior researchers may have failed to find RB for nonwords because display conditions that allow 2 words to be reliably encoded are insufficient for nonwords, or because observers coped with low ability to encode nonwords by using guessing strategies that do not require creating a mental type or tokenizing it. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Creep Crack Growth in Polypropylene Film with Various Crack Lengths at Diverse Stresses and Temperatures

Creep crack growth rates were measured using centrally cracked tension specimens of thin polypropylene film with different crack lengths at various stresses and temperatures. The creep crack growth rates were correlated with the stress intensity factor. There was the region of the minimum constant crack growth rate which occupied more than 70% of the total creep failure life. This constant creep crack growth rate characteristics were analyzed on the basis of the stress-dependent Arrhenius type thermally activated process.     

Efficient Legendre moment computation for grey level images

Legendre orthogonal moments have been widely used in the field of image analysis. Because their computation by a direct method is very time expensive, recent efforts have been devoted to the reduction of computational complexity. Nevertheless, the existing algorithms are mainly focused on binary images. We propose here a new fast method for computing the Legendre moments, which is not only suitable for binary images but also for grey level images. We first establish a recurrence formula of one-dimensional (1D) Legendre moments by using the recursive property of Legendre polynomials. As a result, the 1D Legendre moments of order p, L_p=L_p(0), can be expressed as a linear combination of L_p-1(1) and L_p-2(0). Based on this relationship, the 1D Legendre moments L_p(0) can thus be obtained from the arrays of L₁(a) and L₀(a), where a is an integer number less than p. To further decrease the computation complexity, an algorithm, in which no multiplication is required, is used to compute these quantities. The method is then extended to the calculation of the two-dimensional Legendre moments L_pq. We show that the proposed method is more efficient than the direct method.     

砼受压损伤力学本构模型的研究

本文利用ＭＴＳ公司８１５．０２型电液伺服试验系统对砼进行了等应变速率加载控制的应力一应变全曲线试验，应用不可逆热力学和内变量理论的成果建立了砼损伤力学模型，并用概率统计的观点分析了损伤的演化规律。由于考虑了不可逆变形的影响，本文所建本构模型与实验吻合较好。     

平均声压级近似计算误差分析

本文用凸集理论分析了平均声压级近似计算的误差,导出了最大误差计算公式,指出了测量数据在何种状态下误差达到最大值。     

The effect of fibre alignment on composite strength: II. The strength of angle-ply laminates

Experiments have been carried out on relatively wide angle-ply laminate samples with very short gauge lengths. These proved to be very much stronger than samples tested in earlier work, and which form the basis for our present design with these materials. It is highly likely that the early results for strength were more indicative of edge effects than true laminate strength. This is confirmed by data from tests on pressurized tubes. A review of the literature on this shows that such tests produced results which can be an order of magnitude higher than the early laminate tests. Thus our design calculations could well be severely underestimating the potential strength of angle-ply laminates. This may be having serious consequences for the aerospace industry, through the use of design criteria for strength which may be too conservative. Single-fibre experiments may pave the way for more realistic estimates of angle-ply laminate strengths. These indicate that a simple one-third power rule can be used to estimate the potential strength. However, this is purely ad hoc at present, and needs to be put on a firmer footing through both theoretical and experimental studies. Furthermore, if this approach is adopted, edge effects will still have to be allowed for, and estimated on the basis of the aspect ratio of the part.     

Basic concept and decentralized autonomous control of super‐distributed energy systems

New small‐scale dispersed generation systems, such as fuel cells and micro gas turbines, have made remarkable advances lately and they will be applied practically in the near future. Although a large number of researches on the introduction of small‐scale dispersed generation systems have been carried out, only a small number of small‐scale dispersed generation systems are considered in these researches. Therefore, little is known about problems to be solved when a large number of small‐scale dispersed generation systems are introduced into electric power systems. This paper deals with a super‐distributed energy system that consists of a great number of dispersed generation systems such as fuel cells, micro gas turbines, and so on. The behavior of a customer with a dispersed generation system is simulated as the Ising model in statistical mechanics. The necessity of a distribution network in super‐distributed energy systems is discussed based on the Ising model. The feasibility of decentralized autonomous control using vicinity information is also investigated on the basis of stability analysis of the Hopfield neural network model. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 151(1): 43–55, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10368