Strategic appraisal of energy models for Mozambique

The needs that an energy supply system must meet are constantly changing, due to technological, social and political reasons. Effective energy planning is a dynamic process that is repeated periodically and adjusts to changing conditions. Energy decision makers and planners are no longer able to rely on inductive decision making since they have to investigate the effect of various decision parameters and possible future changes. To help in this process, models have been developed where estimates of future load growth, candidate power plants, fuels and other key factors can be introduced, from which the planners can evaluate decision parameters and the available alternatives. The paper presents the different methodologies and practices that are used by 11 energy models for energy demand forecasting, supply side management and generation expansion planning, demand side management and integrated resource planning. The paper concludes to the presentation of a strategic appraisal of the examined energy models appropriate for energy planning in Mozambique. Three models are proposed for conducting demand forecasting, generation expansion planning and demand side management. Copyright © 2002 John Wiley & Sons, Ltd.     

链条锅炉的节能改造

本文针对株洲硬质合金厂SHL20—13—AII型20t蒸汽链条锅炉存在的问题，进行了节能改造，取得了显著的成效。     

Prediction of the energy dissipation rate in ductile crack propagation

In this paper, energy dissipation rate D vs. Δa curves in ductile fracture are predicted using a ‘conversion’ between loads, load‐point displacements and crack lengths predicted by NLEFM and those found in real ELPL propagation. The NLEFM/ELPL link was recently discovered for the DCB testpiece, and we believe it applies to other cracked geometries. The predictions for D agree with experimental results. The model permits a crack tip toughness R(Δa) which rises from J_c and saturates out when (if) steady state propagation is reached after a transient stage in which all tunnelling, crack tip necking and shear lip formation is established. J_R is always greater than the crack tip R(Δa) and continues to rise even after R(Δa) levels off. The analysis is capable of predicting the usual D vs. Δa curves in the literature which have high initial values and fall monotonically to a plateau at large Δa. It also predicts that D curves for CCT testpieces should be higher than those for SENB/CT, as found in practice. The possibility that D curves at some intermediate Δa may dip to a minimum below the levelled‐off value at large Δa is predicted and confirmed by experiment. Recently reported D curves that have smaller initial D than the D‐values after extensive propagation can also be predicted. The testpiece geometry and crack tip R(Δa) conditions required to produce these different‐shaped D vs. Δa curves are established and confirmed by comparison with experiment. The energy dissipation rate D vs. Δa is not a transferable property as it depends on geometry. The material characteristic R(Δa) may be the ‘transferable property’ for scaling problems in ELPL fracture. How it can be deduced from D vs. Δa curves (and by implication, J_R vs. Δa curves) is established.     

网络技术在中州分公司计量管理工作中的应用探讨

本文通过对中州分公司正在考虑建设的信息网建设实际情况，结合山东分公司、广西分公司取得的经验，对计量管理信息网的应用进行了探讨。     

燃气红外线辐射器的节能与环保特性分析

论述了燃气红外线辐射器的基本原理 ,对其节能与环保特性的分析表明 :与大气式燃烧器相比 ,红外线辐射器的燃料节约率为 15 %～ 45 % ,CO2 排放量减少率为 15 %～ 48% ,CO排放量减少率为 96.2 %～ 97.7% ,NOx 减少率为 94.9%～ 96.9% ,具有显著的节能与环保效果     

电力设计的节电途径

简要介绍了电能作为一种重要的能源在国民经济建设中的重要性和电力设计的几种节电途径。     

量子阱红外探测器能带结构的计算

利用电子波在阱与垒的界面上的反射及干涉效应，计算了量子阱红外探测器(QWIP)的能带结构，并对其适用性进行了分析和讨论。通过与K-P模型比较发现，本方法对计算较宽势阱(阱宽大于4nm)的量子阱结构的电子态适合。在垒宽和阱宽不变条件下，用两种方法计算得到的AlGaAs／GaAs量子阱材料中Al组分x与吸收峰值波长λp的关系曲线基本相同。结果说明，在较宽的范围内，本方法对QWIP能带结构的计算是适用且简便的。     

XPS studies of directly fluorinated HDPE: problems and solutions

X-ray photoelectron spectroscopy (XPS) applied to the study of fluorinated polymer surfaces presents several problems related both to peak assignment and to degradation. In this work, we analyse extensively the question of XPS peak assignments in this kind of surfaces. We conclude that in this kind of surfaces using binding energy differences between fluorine and carbon is better than using absolute binding energies. Also a useful relation between fluorine photoelectron energy vs. polymer composition expressed through the atomic ratio fluorine/carbon (F/C) was found. A protocol for data treatment is proposed and applied to a XPS study of the degradation induced by X-ray on high-density polyethylene surfaces modified by direct fluorination. Results obtained for the degradation, namely the atomic ratio F/C obtained by two different methods, combined with angle resolved X-ray photoelectron spectroscopy (ARXPS) were used to study the fluorine concentration profile in depth, producing self-consistent results.     

Municipal solid waste conversion to energy

In recent years it has been recognised by an increasing number of nations that there is considerable energy potential within MSW. As a result many countries have established R,D& D programmes to examine methods of exploiting this potential. The IEA's MSW Conversion Activity was set up in 1986 to provide an infrastructure for sharing information and co-ordinating work in this area internationally. This Activity was extended in 1989 and currently a total of 9 nations participate in it.

To cope with the wide scope of the area (encompassing both biological and thermal processing of MSW) the Activity was divided into three subgroups or Expert Working Groups (EWGs). Each of these dealt with a distinct area of expertise:

1. •Downstream effects of source separation and screening of MSW

2. •Sampling and analytical protocols

3. •Landfill gas

In addition to these groups a central secretariat based at Harwell (UK) has provided guidance, established and administered databases of contacts and produced a series of national reports.

This paper describes the achievements of the Activity and discusses work proposed for the future.     

The spatial economics of geothermal district energy in a small, low-density town: a case study of Mammoth Lakes, California

This research focuses on the spatial economics of geothermal district energy (DE) systems that distribute hot fluids through a pipeline network to multiple thermal customers. We argue here that DE is held back by uncertainty about its economic feasibility when implemented in real places. DE works best with high urban densities, but in the US the best geothermal resources are in the less-populated west. Economic geography theory suggests that the optimal size of a DE firm's service area should depend on the trade-off between the economies of scale inherent in a large service area and the greater network development costs and heat loss involved in serving a large area. The HEATMAP© software program developed by Washington State University was used to study the feasibility of numerous scenarios for a proposed DE system in Mammoth Lakes, California. Results indicate that the core area of the town is large enough, dense enough, and in close enough proximity to the resource for profitable DE development. Proposed ski village developments would increase the thermal load density and significantly enhance its ability to remain competitive with other fuels, even in pessimistic sensitivity analyses regarding geothermal heat input costs, public participation, and retro-fitting costs.