应变式压力传感器特性补偿和应用

讨论了用动态补偿数字滤器对应变压力传感器的动态特性进行补偿，使之提高测量精度并能用于爆炸冲击波测量的一种方法。实验结果与经验值比较，补偿前．后对比、测量精度有明显提高，说明在一定条件在变式测压系统也可用于爆压的测试。     

New approaches for error estimation and adaptivity for 2D potential boundary element methods

This work presents two new error estimation approaches for the BEM applied to 2D potential problems. The first approach involves a local error estimator based on a gradient recovery procedure in which the error function is generated from differences between smoothed and non‐smoothed rates of change of boundary variables in the local tangential direction. The second approach involves the external problem formulation and gives both local and global measures of error, depending on a choice of the external evaluation point. These approaches are post‐processing procedures. Both estimators show consistency with mesh refinement and give similar qualitative results. The error estimator using the gradient recovery approach is more general, as this formulation does not rely on an ‘optimal’ choice of an external parameter. This work presents also the use of a local error estimator in an adaptive mesh refinement procedure. This r‐refinement approach is based on the minimization of the standard deviation of the local error estimate. A non‐linear programming procedure using a feasible‐point method is employed using Lagrange multipliers and a set of active constraints. The optimization procedure produces finer meshes close to a singularity and results that are consistent with the problem physics. Copyright © 2002 John Wiley & Sons, Ltd.     

Concurrent error detection of fault-based side-channel cryptanalysis of 128-bit RC6 block cipher

Fault-based side channel cryptanalysis is very effective against symmetric and asymmetric encryption algorithms. Although straightforward hardware and time redundancy based concurrent error detection (CED) architectures can be used to thwart such attacks, they entail significant overhead (either area or performance). In this paper we investigate two systematic approaches to low-cost, low-latency CED for symmetric encryption algorithm RC6. The proposed techniques have been validated on FPGA implementations of RC6, one of the advanced encryption standard finalists.     

A parametric interpolator with confined chord errors, acceleration and deceleration for NC machining

Parametric interpolation has many advantages over linear interpolation in machining curves. Real time parametric interpolation research so far has addressed achieving a uniform feed rate, confined chord errors and jerk limited trajectory planning. However, simultaneous consideration of confined chord errors that respect the acceleration and deceleration capabilities of the machine has not been attempted. In this paper, the offline detection of feed rate sensitive corners is proposed. The velocity profile in these zones is planned so that chord errors are satisfied while simultaneously accommodating the machine's acceleration and deceleration limits. Outside the zone of the feed rate sensitive corners, the feed rate is planned using the Taylor approximation. Simulation results indicate that the offline detection of feed rate sensitive corners improves parametric interpolation. For real time interpolation, the parametric curve information can be augmented with the detected feed rate sensitive corners that are stored in 2×2 matrices.     

Study on the Intelligent System of Gear Pitch Deviation Measurement and Analysis

The intelligent controlling and data process of pitch error measurement is proposed. The whole system takes C++ as the development tool and takes advantages of object-oriented and visualization, having the advantages of easy operation and humanistic interface. In the meanwhile, the system can be complemented and improved according to the demand of user, having certain independence. The research of the system provides an efficient and reliable way to measure and analyze the gear pitch, which can be referenced in the future research.     

Method of Reducing Error in Calculations of Active Power from Signal Samples

The paper presents the results of investigations into several methods of calculating the active power value from current and voltage signal samples. The accuracy attainable for nonsinusoidal signals whose frequency differs from the nominal one was determined. A new active power calculation method ensuring accurate results for sampling over two signal periods is proposed. The method uses a very simple computing algorithm.     

水上地震折射互换法误差分析

在理论上，用源检互换的方法进行折射地震勘探是没有误差的，在某些特殊条件下无法铺设检波器而又必须进行折射地震勘探时它也是唯一的选择，然而，在实际工作中，由于各种因素的影响，其误差是不可忽略的。为此，本文从地震折射运动学的角度对水上地震折射互换法因过河钢丝绳的重量、水的流速和流向、炮点深度等客观因素造成的解释误差进行了分析，揭示了水上地震折射互换法应注意的问题。这对水上地震折射互换法的资料解释进行误差校正提供了理论基础。     

Estimation of errors of hydrogen standard time scale preservation taking account of systematic frequency changes

Metrological characteristics of active hydrogen frequency standards are investigated on the basis of internal and external comparisons. The stability of random changes and drift of hydrogen frequency standards and also the potential capabilities of time scale preservation with effective consideration of systematic changes in their frequency are demonstrated. __________ Translated from Izmeritel’naya Tekhnika, No. 3. pp. 42–45, March, 2007.     

桥口南--徐集地区三维地震资料连片处理技术

针对东濮桥口南—徐集地区三维地震资料的特点及本区块的地质要求，制定处理流程，应用能量均衡、面元均化、三维道内插、三维DMO叠加及三维一步法偏移等技术方法，研究解决因为不同年代、不同方法、不同参数所采集的地震数据在连片处理时存在的问题，精细处理三维连片资料，满足构造解释精度的要求，对进一步落实该区构造和增储上产具有重要的作用。     

DS18B20在解决应变测量中的应用

工业现场的温度变化范围大而剧烈，工作在工业现场的传感器大多数都对温度有一定的敏感度，这样就会使传感器的零点发生漂移，导致测量出现附加误差，因此温度补偿问题一直是传感器技术中的关键环节。根据单总线数字式温度传感器DS18820的工作原理、结构，并以电阻应变式传感器为例，提出了具体的补偿方案。