砂土的剪胀方程及其塑性势(Ⅰ):发展现状

以能量守恒原理为主线,在各向同性前提下,对Taylor剪胀方程、Cam-clay剪胀方程、修正Cam-clay剪胀方程、Rowe剪胀方程和扩展的Rowe剪胀方程等进行了较全面的综述.论证了剪胀方程和塑性势函数之间的相互转化关系.指出了Lade-Kim塑性势函数和Nova塑性势函数的缺陷之处,即这两个塑性势函数均没有合理耦合临界状态这一概念.     

定向凝固NiAl合金的拉伸行为研究

研究了定向凝固NiAl-Mo(Hf)和NiAl-Fe(Nb)合金的拉伸行为和显微组织变化.结果表明,两种合金在一定的拉伸条件下均具有反常的屈服行为和中温脆性.反常屈服和中温脆性行为与合金中含有的Ni3Al相有关.两种合金在高温时还表现出高应变速率的超塑性变形行为.超塑性变形的主要机理是位错滑移和攀移产生的应变硬化与动态回复和动态再结晶的应变软化作用相平衡.超塑性变形试样的断口呈韧性特征,在断裂区有孔洞产生.     

Recent Progress on Non‐oriented Silicon Steel

Control of crystalline orientation and consequent enhancement of magnetic properties are important for decreasing core loss of non‐oriented silicon steel as well as grain‐oriented silicon steel. Through the development of special process techniques to produce clean refined steel, it is now possible to use any element to improve the crystalline texture control of steel without producing harmful effects. Utilization of these effects have actually lowered the core loss and raised the magnetic flux density of the products, and a product series of high‐efficiency non‐oriented silicon steel has been developed. Recently, demand has grown for non‐oriented silicon steel with particular properties, such as lower core loss at high frequencies or high strength, as high‐speed motors have progressed in regard to high efficiency and miniaturization. In response to this trend, non‐oriented thin gauge silicon steel with a thickness of 0.20 and 0.15mm and high strength non‐oriented thin gauge silicon steel with the same thickness but a yield strength of more than 570MPa and 780MPa have been developed.     

确定厚壁圆筒初始屈服压力的一种实验方法

基于厚壁圆筒的弹性失效准则所确定的圆筒的初始屈服压力与材料的屈服极限的关系，设计了一种测定厚壁圆筒初始屈服压力的实验方法，并测得了一组实验数据。通过对该实验数据的分析得到了圆筒的初始屈服压力。该实验值与理论值误差较小，表明了该实验方法具有较好的可靠性。     

模拟点蚀油气管线钢的拉伸性能

根据发生点腐蚀的油气管线基体有许多点蚀坑的特点,通过计算机产生随机数确定点蚀坑的位置,用小钻头打孔的方法模拟X60管线钢基体的多孔特征进行拉伸试验,测得其弹性模量、屈服强度和抗拉强度,并将理论计算值与前二者进行比较和修正,给出了多孔钢材的抗拉强度与孔隙率的函数关系.结果表明,多孔钢材弹性模量的实测值随孔隙率的变化与理论预测结果较为吻合;钢材实测屈服强度也随着孔隙率的增加而减少,但在较高孔隙率时其减少趋势变缓;衰减速率的实测值略大于理论预测值;实测抗拉强度随孔隙率的变化曲线与屈服强度相似,但对孔隙率更敏感.     

Further study on different dopings into PbWO4 single crystals to increase the scintillation light yield

Since we presented our preliminary result (Nucl. Instr. and Meth. A 486 (2002) 170) at SCINT2001, we have continued our efforts to increase the light yield (LY) of PbWO₄ scintillators by extending different dopings with an aim to find a possibility of using PbWO₄ successfully in Positron Emission Tomography (PET). Overall result obtained for single doping as well as double and tripple co-dopings are summarized, including decay characteristics and radiation hardness. The LY in non-doped PbWO₄ crystals with a size of 10×10×(20–30) mm³ is 25–35 photolectrons/MeV (phe/MeV) corresponding to 3–4% of the LY in BGO, when measured with a bialkali photomultiplier during a gate of 1 μs. The maximum LY increased to 49 phe/MeV for single doping with Mo⁶⁺, 80 phe/MeV for double co-doping of Mo⁶⁺+Sb⁵⁺, and 85 phe/MeV for tripple co-doping of Mo⁶⁺+Cd²⁺+Sb⁵⁺. The radiation hardness is larger than 10⁵ Gy for each of the samples co-doped with Mo⁶⁺+Sb⁵⁺ and Mo⁶⁺+Cd²⁺+Sb⁵⁺, while it is much poorer in PWO:Mo⁶⁺. In each of these co-doped samples, a medium-speed green emission in the microsecond range is created besides the fundamental fast (a few nanoseconds range) blue one, giving a peak at 500 nm in the radioluminescence spectrum similarly as in PWO:Mo⁶⁺.     

不同插秧量对东北杂交稻与常规稻产量结构的影响

对东北杂交稻与常规稻的产量形成过程和产量结构进行了分析。结果表明：杂交稻比常规稻增产的主要原因在于杂交稻的经济系数显高于常规稻，这主要得益于杂交稻后期光合产物向籽粒的转移率较高。在产量结构上，杂交稻的穗粒数多、千粒重大，但穗粒数的优势主要来源于二次枝梗，这也造成了杂交稻的结实率偏低，成为限制杂交稻产量潜力发挥的瓶颈。进一步发挥杂交稻的杂种优势，需要从提高后期光合能力和提高结实率两方面人手。杂交稻与常规稻有各自适宜的栽培方式，插单苗有利于提高杂交稻的平均穗重、千粒重、结实率，并最终使产量提高；而插3苗更适于常规稻生产力的发挥。     

大穗型超级杂交粳稻辽优3072产量结构及灌浆特性研究

对北方大穗型超级杂交粳稻辽优3072进行了产量结构和灌浆特性的研究。结果表明：辽优3072在产量结构上表现出了较强的杂交优势，比对照辽粳294增产明显。辽优3072在灌浆上的特点为穗上、中、下各部间干物质充实及灌浆速率差异较小：穗下部灌浆启动早，后期灌浆速率大；整穗表现出较强的持续灌浆能力。辽优3072良好的籽粒灌浆特性是其在产量上表现出超高产的生理基础之一。同时探讨了利用水稻杂交优势选育具有特异灌浆特性的杂交组合的育种思路以及在北方冷凉稻区推广大穗型超级杂交粳稻品种的可能性。     

杆板结构系统的可靠性分析

提出一种可模拟飞行器翼面等薄壁结构的杆板结构系统的可靠性分析方法，导出在Ｍｉｓｅｓ屈服条件下平面应力元件的完全裕量方程。