Global coupled equations for dynamic analysis of planishing mill

The dynamic properties of rolling mill are significantly influenced by many coupling factors.According to the coupled mechanical and electric dynamics theory.the global coupled equations for the dynamic analysis of planishing mill CM04 of Shanghai Baosteel Group Corporation were derived,by using finite element methods.These elasto-dynamic equations estblish the coupling relations among the stand vibration system,torsional vibration system,driving motors,etc.It provides theoretical basis to a certain extent for globally dynamic simulation,analysis of stability of motion.prediction of abnormal operating mode,globally optimum design and control,etc.     

溃口近区二维数值模拟与溃坝洪水演进耦合

基于黏土心墙砂石坝的溃决过程,以及溃坝洪水传播和运动的特性,建立黑河金盆水库大坝溃口近区二维数值模型和下游地区溃坝洪水演进耦合数学模型。使用DAMBRK法计算逐渐溃坝,并应用其结果进行后续模拟。采用Abbott-Ionescu六点隐式有限差分格式求解一维模型,采用单元中心的有限体积法求解二维模型方程。采用侧向连接方式,将黑河两岸计算水位点与二维网格单元相连,实现一、二维模型的耦合。采用所建立的二维模型对溃口近区进行计算与模拟,得到计算区域某一时刻的水深及流速分布。应用所建耦合模型对黑河金盆水库万年一遇入库洪水漫顶致溃坝洪水进行数值模拟,得到一维河道内各断面的水位和流量变化过程,以及二维计算区域内不同时刻的水深分布图、流速矢量图和淹没范围变化过程。溃口的形成过程不仅包括漫顶水流的直接作用,同时包括溃口形成过程中两侧漩涡状水流的反冲刷作用。耦合模型可以同时兼顾河道内的水流变化以及河道外计算区域内的洪水演进过程,从而减少由于计算结果偏大或偏小所带来的防洪资源浪费和防洪措施不利等不良影响。     

Synchronization for linear singularly perturbed complex networks with coupling delays

This paper is concerned with the synchronization problem about linear singularly perturbed complex network system with coupling delay. The sufficient delay-dependent conditions for the synchronization of the network are established by introducing an equivalent network system with the Lyapunov stability theory. These conditions, which are formulated in terms of linear matrix inequalities, can be solved efficiently by the LMI toolbox of MATLAB. A simulation example is provided to show the validity of the proposed the synchronization conditions of the whole network.     

油井电磁清蜡器中电磁-热耦合场的数值模拟

为了减少感应加热对电磁清蜡器腔管的热蚀,提高电磁清蜡器的使用寿命,在分析油井电磁清蜡器感应加热过程的基础上,利用ANSYS的APLD语言建立了电磁清蜡器的电磁热耦合场有限元模型.重点对油井电磁清蜡器处理腔管中的电磁—热耦合场进行了仿真分析,得出了腔管内外壁的温度分布规律.仿真结果表明:电磁感应加热5s,钢管表面温度升高至175.128℃;加热10s钢管表面温度达到了343.286℃,避免了常规电阻式加热钢管明显的温升滞后现象,体现了电磁感应加热的升温速度快的特点,20s后钢管内的温度分布比较均匀,钢管总体温度在490～ 569℃的范围内,钢管内壁与钢管表面温差在77.323℃以下.     

The design and test of dual/triple‐mode bandpass filter based on temporal coupled‐mode theory

In this article, the design and test of both a K‐band dual‐mode bandpass filter (BPF) pair and a K‐band triple‐mode BPF are presented based on N‐mode temporal coupled‐mode theory (CMT). The expressions of transmission and reflection responses are analytically derived. All the parameters in the expressions have clear physical meanings and are easily optimized to reach the required filter performance. Aided by eigenmode simulations, concrete structures of the three integrated BPFs are designed and optimized to approach the calculated physical parameters. After the fabrications and measurements of the three BPFs, extended upper/lower stopband with high stopband rejections are achieved, and by increasing the number of resonant modes, improved frequency selectivity and better passband flatness are obtained. The analytical analysis well predicts the simulation and measurement results, which provides an efficient way for BPF designs. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:609–622, 2016.     

Novel ultra‐compact two‐dimensional waveguide‐based metasurface for electromagnetic coupling reduction of microstrip antenna array

A novel ultracompact two‐dimensional (2D) waveguide‐based metasurface is proposed herein and applied for the first time to reduce mutual coupling in antenna array for multiple‐input multiple‐output applications. The unit cell of the proposed 2D waveguide‐based metasurface is ultracompact (8.6 mm × 4.8 mm, equal to λ₀/14.2 × λ₀/25.5) mainly due to the symmetrical spiral lines etched on the ground. The metasurface exhibits a bandgap with two transmission zeros attributing to the negative permeability in the vicinity of magnetic resonance and the negative permittivity in the vicinity of electric resonance. Taking advantage of these two features, a microstrip antenna array is then designed, fabricated, and measured by embedding an 8 × 1 array of the well‐engineered 2D waveguide‐based metasurface elements between two closely spaced (9.2 mm, equal to λ₀/13.3) H‐plane coupled rectangular patches. There is good agreement between the simulated and measured results, indicating that the metasurface effectively reduces antenna mutual coupling by more than 11.18 dB and improves forward gain. The proposed compact structure has one of the highest reported decoupling efficiencies among similar periodic structures with comparable dimensions. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:789–794, 2015.     

两种动水压力模型重力坝地震动力损伤比较分析

采用基于位移格式的流体单元与弹塑性损伤本构的固体单元分析了坝体—水库耦合系统在强震下库水对重力坝的动力响应、坝体内部应力分布以及损伤的影响。对流固耦合模型与附加质量模型的坝体损伤分析结果进行比较发现,附加质量模型不仅对上游坝面的动水压力有放大作用,而且对坝体的其他动力响应,如位移、加速度,也有不同程度的放大作用。同时,附加质量模型对地震中坝体内部应力及损伤也有一定的放大作用。可见,流固耦合模型分析大坝—水库系统相互作用更接近现实情况。     

基于耦合模型的安康库区水温水质影响研究

河流上筑坝发电将对水温、水质等生态环境产生影响。该文建立了三维水温水质耦合模型,以汉江上游安康水电站为例,选取COD(化学需氧量)和氨氮为水质指标,利用实测的水温、水质数据率定参数,对比分析单独计算和耦合计算其坝前垂向水温的差异性,模拟"引汉济渭"工程实施后逐月水温水质分布,总结耦合计算其库区水温、水质的变化规律。研究结果表明,耦合计算坝前垂向水温较单独计算反应灵敏,与库区实测水温更接近;耦合计算坝前水温在3月至9月呈弱分层状态,其余月份呈混合状态;对比不同年份的水电站下泄水温与坝址处天然水温可知,枯水年对水温影响最大,平水年次之,丰水年影响最小;坝前垂向氨氮、COD的分布规律基本与实测水温分布规律一致,受温度异重流影响,耦合计算的COD、氨氮分布规律与实际情况更相符合。     

考虑桩顶水平反力的水平受荷单桩弹塑性解析解

基于线性地基反力法和土体的弹塑性本构关系,对桩顶水平反力系数不为零时的水平受荷桩进行了研究,给出了桩顶土屈服临界荷载（水平力、弯矩）的耦合关系式。研究结果表明,当荷载大于临界荷载时,桩顶土发生塑性屈服,其塑性屈服深度随荷载的增加而增加,但其塑性区扩展速率随桩顶荷载的增加而逐渐减小。给出了弹性区与塑性区桩内力耦合的矩阵方程及其迭代求解格式;利用曲面拟合软件给出了塑性区换算深的计算公式。通过工程算例验证,证明该方法可靠快捷,便于手算,值得推广。 